A copy of what?
On Tue, Mar 4, 2008 at 1:59 AM, Geoffrey B vous.je@gmail.com wrote:
you get a copy of it, can you post it on a seperate email?
On Tue, Mar 4, 2008 at 12:12 AM, Vyki Englert < vyki.englert@thekickstand.org> wrote:
We (thekickstand)are also looking for a pos system. Lucky for us we have some computer gurus on board who are familiar with linux and open source software. I run linux myself, and plan to run it at the shop as well, as open source seems to fit well into the idea of community... and sharing... and happiness :) I'll let you know what we decided on when we get a computer at the shop. For now we do not have any sales yet.
Wikipedia has a great comparison of accounting software, its a chart: http://en.wikipedia.org/wiki/Comparison_of_accounting_software If you do not intend to run linux, there are opensource applications that are cross platform, meaning they will run on windows macs or linux. If you want to stick to the main stream, Quickbooks seems to be the most popular software for small business. If you have nonprofit status, you can buy a copy from Techsoup really cheap. http://techsoup.org Techsoup rocks for nonprofits. They have quite a catalog of software that is available to nonprofts for pennies. As well as sometimes hardware is donated.
hope this helps, vyki
On Sun, Mar 2, 2008 at 12:51 AM, Justin Pogge xecax@hotmail.com wrote:
i was wondering if anyone had a point of sales system on a computer at their shop? i know that the bicycle kitchen in LA does and they were offering a copy of it to anyone that wanted it, but i have not received an email reply from them. i think that it would make keeping track of funds much easier along with helping us do our irs forms. anyone want to share their program? justin krank it up! community bicycle project tallahassee florida
From: mark@re-cycles.ca Date: Fri, 29 Feb 2008 14:10:37 -0500 To: thethinktank@bikecollectives.org Subject: Re: [TheThinkTank] direct-pull brake levers v. everything
else
Below are some guidelines, courtesy of one of our former mechanics.
Mark
++++++
The difference between Canti levers and V levers (the difference you
can see) is the distance between the cable head and the lever pivot.
The larger the distance the greater the cable pull, which means less
mechanical advantage which means less scary flip-your-bike-over-but-
mushy-feeling power when mated to v brakes.
Many newer brake levers also have a little "v" or "c" stamped somwhere (often on the part of the lever 'handle' that disappears inside the lever 'body').
Some other levers can be used with both V's and canti's - the point in the lever where the cable is anchored is adjustable, either by moving spacers and manually moving the cable head, or by twirling a little dial. The latter is only used on higher quality (read: not likely at most bike recycling places) levers made by Avid.
And the actual distance betwen pivot and cable? I'm not really sure exactly, but I would estimate about 2 cm for V levers and approx.
1.5
- 1cm or less for canti levers. Look at any cheap old Lee Chi's or
Di Yung's for a perfect example of a non-v lever.
If you mate canti levers with v brakes you get very mushy feeling brakes, crazily uncontrollably powerful brakes, and very little clearance between the pads and the rim. If you mate v levers with canti (or caliper or U) brakes you get very low stopping power and
an
extremely stiff lever feel. Its actually pretty easy to tell when you know what you're looking for.
On 29-Feb-08, at 12:50 PM, Erik Stockmeier wrote:
sheldon brown (r.i.p.) went on at length all over his website
about
not mixing direct-pull ("V" brake, noodle brake) brake levers with
any
other type of brakes & vice versa.
here is one quote, from http://www.sheldonbrown.com/canti- direct.html :
Direct-pull cantilevers have double the mechanical advantage
compared
with traditional brakes, so they require special brake levers. Direct-pull brake levers pull the cable twice as far, half as
hard.
The lower mechanical advantage of the lever compensates for the
higher
M.A. of the cantilever. It is not generally safe to mix and match levers/cables between direct pull and other types for this reason.
- Conventional brake levers used with direct-pull cantilevers will
usually not pull enough cable to stop in wet conditions without bottoming out against the handlebars. In dry conditions, they
either
won't work, or will grab too suddenly.
- Direct-pull brake levers used with any other type of brakes will
feel nice and solid when you squeeze them, but due to their lower mechanical advantage you'll need to squeeze twice as hard to stop
as
you should, so unless you are a lightweight rider with
gorilla-like
paws, this combination isn't safe either.
...end quote
so my question is this... do i need to go through my personal collection of brake levers and somehow identify/separate DP levers from the rest? is there any simple way to do this? it seems like a problem i've seen many people run in to--the brakes seem fine on
the
stand, nonexistant when the bike goes out for a test ride. so this
is
probably something we should be on the lookout for, right?
ok, thanks
erik
of course there is this huge and boring page as well:
http://www.sheldonbrown.com/cantilever-geometry.html#mechanical _______________________________________________ Thethinktank mailing list Thethinktank@bikecollectives.org http://lists.bikecollectives.org/listinfo.cgi/thethinktank- bikecollectives.org
Thethinktank mailing list Thethinktank@bikecollectives.org
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...
Climb to the top of the charts! Play the word scramble challenge with star power. Play now!http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_jan
Thethinktank mailing list Thethinktank@bikecollectives.org
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...
-- Vyki Englert "sprocket" acting Director of operations Member Board of Directors Gainesville Community Bicycle Project, Inc "the Kickstand" 722 South Main Street Gainesville Fl 32601 www.thekickstand.org vyki.englert@thekickstand.org 850.819.8808
'every normal man must be tempted, at times, to spit on his hands, hoist the black flag, and begin slitting throats.' --h.l. mencken _______________________________________________ Thethinktank mailing list Thethinktank@bikecollectives.org
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...
-- "Cycle tracks will abound in Utopia" - H.G. Wells _______________________________________________ Thethinktank mailing list Thethinktank@bikecollectives.org
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...