Vice advice is right on - posting an ad for a good ole vice for a community bike shop could get one donated. Lots of folks with unused shops out there.
The other thing to try on a seatpost is to take the bottom bracket out, put the frame in a stand and flip it upside down, then drip some penetrating oil in the seat tube. This takes some time, but worth trying before in there with a hacksaw or risking damaging a sweet frame by pounding & wrenching.
- Colin
On 8/6/08, Mark Rehder mark@re-cycles.ca wrote:
On 6-Aug-08, at 10:37 AM, Bob Giordano wrote:
a vise is good for stuck seat posts. flip over the bike, insert seat post
into vise, tighten -but not too much to crush post-, move bike frame back and forth gently and smoothly while pulling up. be very careful to use smooth motions and 2 or 3 people as to not tweak frame.
Yeah, we have a 4" vise and it has come in very handy for things like this. It of course also needs to be bolted to a strong, sturdy table.
any other 'stuck seat post' tips?
-Bob Giordano, Free Cycles Missoula
Sheldon has the answer(s):
http://www.sheldonbrown.com/stuck-seatposts.html
Cheers,
Mark Rehder http://re-cycles.ca _______________________________________________ Thethinktank mailing list Thethinktank@bikecollectives.org
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...