Here's a picture of our modest truing station...The cone wrenches reside next to the station on the master toolkit, along with chain breakers and other stuff. The whole setup is movable, though it usually stays right where it is. As you can see, it tends to collect random junk/parts, like all flat surfaces in the shop.
Brian
Urban Bike Project of Wilmington -a 501(c)3 non-profit bike shop- 1908 N. Market Street (entrance is in the parking lot behind the building) Wilmington, DE 19802
Hours: Thursday 6:30-9:00 Saturday 1:00-4:00
Visit us online at http://urbanbikeproject.org
On Sun, Jun 21, 2009 at 1:45 PM, veganboyjosh@gmail.com wrote:
Here's a picture of the bicycle kitchen (LA)'s wheel truing "room",http://picasaweb.google.com/lh/photo/Ms7n82ikuU5mhdJSEq_aTA?authkey=Gv1sRgCIjNlbiC6PqKtQE&feat=directlinktaken when I was visiting late last year.
The thing I liked most about it was the directional lighting above each stand. It's also set up at a sitting height, with chairs. Presumably, when you're using a truing stand, you'll be at it much longer than if you were at a vise or something. It's also outside of the normal flow of traffic/shop floor, so you can focus more readily on the wheel you're working on without being distracted. Very nice.
On Sun, Jun 21, 2009 at 11:07 AM, rachael spiewak rachael@sopobikes.orgwrote:
We keep the cone wrenches by the stationary truing stand, and that's in the back of the shop, so you have to travel a long way to get to those wrenches. The box wrenches live near the front of the shop, far far away from the cone wrenches. Seems to help. I do think people get hungry sometimes and gnaw on the cone wrenches.
The freewheel tools are in the center of the shop, next to the vice.
-rachael
On Sun, Jun 21, 2009 at 12:56 PM, Rich Points rich@communitycycles.orgwrote:
Collectives, We're about to start digging into setting up our new space, specifically the wheel and truing station. Right now we have a dedicated work space for a truing stand, spokes and hubs but our cone wrenches, free wheel and cassette tools are mixed in with our general tool bench. Because of this our cone wrenches are often used for the most inappropriate jobs imaginable. We also have a couple extra truing stands that float around the shop.
Now that we have a little more space we want to set up a wheels and truing area of the shop. I'd love to see photos of how you do this in your shops.
Looking forward to your responses.
-- Rich Points Community Cycles Director http://CommunityCycles.org Rich@CommunityCycles.org 720-565-6019 (W) 303-589-0597 (C) Donate your old car to Community Cycles http://communitycycles.org/get-involved/donatecar.html Make your ride count! Register for Bike to Work Day June 24, 2009 http://www.drcog.org/btwd2009/index.cfm?page=Register
Thethinktank mailing list Thethinktank@bikecollectives.org To unsubscribe, send a blank email to TheThinkTank-leave@bikecollectives.org To manage your subscription, plase visit:
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...
-- Sopo Bicycle Cooperative 404-425-9989 www.sopobikes.org
Hours of operation: Tues, Wed, & Thurs 7 pm - 10 pm Sat & Sun 2 pm - 6 pm
Thethinktank mailing list Thethinktank@bikecollectives.org To unsubscribe, send a blank email to TheThinkTank-leave@bikecollectives.org To manage your subscription, plase visit:
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...
Thethinktank mailing list Thethinktank@bikecollectives.org To unsubscribe, send a blank email to TheThinkTank-leave@bikecollectives.org To manage your subscription, plase visit:
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...
