Josh's 3rd point is really good. To add to it there are other tools that are non-destructive (aka NOT vice grips) That can do the same work as the fancy dedicated tools. For example an adjustable wrench can remove almost every thing on a bike, including pedals. but there are some tools that just make life easier, crank puller, pedal wrench, cotter pin remover. I would suggest getting the essential tools that would be critical in mos occasions, my suggestions are: adjustable wrenches, hex keys, pliers, spoke wrenches, screwdrivers, freewheel removers (suntor 2 & 4, bmx, and shimano), chain break, and a hammer.
At our shop in troy,ny we have shops closing due to people retiring with out an heir to their shop, so we've gotten lucky on some of out obscure tools. Best one so far has been a cotter pin press (used to mushroom and mangle cotter pins on removal with a hammer). Also if you have a welder in your group don't be afraid to start making tools. We had a headset press that worked great for a few years that was a crank arm welded to a threaded rod, some hefty washers and a nut.
Hope you the best!
On 17 October 2012 08:19, veganboyjosh@gmail.com wrote:
- when building a system for your organization, remember that it's easier
to scale down than scale up. so while the solution you come up with for processing bikes or storing fenders may work for 10 bikes per month, it may crumble under the metaphorical weight of 100 in a month. try to think forward and anticipate growth this way, so that the growth and demand can come and be controlled instead of a burden.
- keep communication lines open with the people who are working there,
but remember your audience. it's vital to keep in touch with all of your core volunteers, staff members paid or unpaid, as well as board members and clients. the message or lines of communication should obviously be different for each of those, but it's important to be in a constant state of feedback/adjustment for what's working for people and what's working for the organization.
- be logical about tool acquisition. don't go out and buy a full set of
professional tools yet if you're not ready. why spend $500 for a bottom bracket tap and facing set now, that's only going to sit around unused or worse, get misused and damaged, while you stress about paying the rent? better to be frugal in the beginning, build the tool set as you can afford/see the need, and build a better infrastructure that can easily afford a $500 tool in 6 months. don't think you have to purchase brand new tools in order to be effective. solicit local bike shops, mechanics, and other for their unused tools, and put those to work. don't forget to include that you'll accept tools as well as bikes as donations in your organization. 3.1 (sneaking this one in): if there's something you need, don't be shy about asking for it from your community of supporters. remember that everyone involved with your group has a circle of friends they can reach out to, and THOSE people have circles of their own. USE these strong, already-established connections as much as you can.
good luck! keep us posted on your progress.
On Wed, Oct 17, 2012 at 8:07 AM, Doug Franz <doug@coatesvillebikeworks.org
wrote:
Stewart, congratulations on getting started! ****
My top three lessons learned:****
**1) ** Don’t worry about a shortage of used bikes. Once the word gets out, you’ll be flooded. In fact, you should plan on processing them quickly so you don’t get buried.****
**2) **When somebody donates a bike or gets their bike worked on, point to your donation jar and ask them to put in what they can or what they feel the service is worth. In the case of a donation, I tell people we put on average $20 of material into each rebuild, and could use some help covering those costs.****
**3) **Use the Bike Collectives wiki. There are tons of good ideas there. http://www.bikecollectives.org/wiki/index.php?title=Main_Page****
Good luck!****
Doug Franz, President****
[image: BikeWorks_3_wText]****
coatesvillebikeworks.org****
like us on facebook! http://www.facebook.com/CoatesvilleBikeWorks****
doug@coatesvillebikeworks.org****
610-383-4349****
I respect your right to manage the amount of email you receive. If you want to be removed from this email list, please reply to ONLY ME, with "unsubscribe" in the subject line. ****
*From:* thethinktank-bounces@lists.bikecollectives.org [mailto: thethinktank-bounces@lists.bikecollectives.org] *On Behalf Of *Stewart Vanns *Sent:* Wednesday, October 17, 2012 7:25 AM *To:* thethinktank@lists.bikecollectives.org *Subject:* [TheThinkTank] New community cycleworks need top tips!****
Hi, We are in the process of setting up a community cycle project in south east London, Uk.****
I just wondered if you guys & gals could pop down 3 top tips you learnt in your set up phase to help us avoid the common pitfalls. ****
We are planning to build a not for profit enterprise, with a 5 year business plan, focusing on recycling donated bikes, repairing bikes and doing this with young people and young adults.****
The bikes will be given to trainees or sold very cheaply to local residents of low income. ****
We also plan to do outreach work at local schools to educate children in basic cycle maintenance.****
We have funding, a venue and a steady flow of interested people.****
Thanks in advance,****
Stewart Burgess community cycleworks.****
Thethinktank mailing list Thethinktank@lists.bikecollectives.org To unsubscribe, send a blank email to TheThinkTank-leave@bikecollectives.org To manage your subscription, plase visit:
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...
Thethinktank mailing list Thethinktank@lists.bikecollectives.org To unsubscribe, send a blank email to TheThinkTank-leave@bikecollectives.org To manage your subscription, plase visit:
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...