Assuming you have access to parts, you can make a two sided repair stand with a couple pairs of drop bars with stems, a BMX or mountain fork, and a base of your choosing. 

Cut the dropouts and bottoms off of the fork. The fork will "live" upside down in the finished stand.
Seat one stem in each of the forks. Adjust the bars so they're upside down and will cradle the top tube of a frame. 
Tighten bolts, etc. 

If you have a stem that matches the BMX/MTN fork, you can use it to attach the stand to a horizontal bar if it's the correct diameter. 

You can also build a freestanding base that's basically the same setup but with BMX bars splayed out almost horizontal so that each grip is one of four "feet" and the base is wide enough to support a bike without being unstable. The only tricky part is connected the two opposing steerer tubes. I used a length of top tube from a discarded frame plus some through bolts. There might be a better way. 

I built one of these years ago and it took a couple hours. With more hands helping, it would be much faster. It would definitely add some fun bike flavor to the space and be useful. 

And it goes without saying that putting this in an open area where tools live and are accessible leaves it open that someone could come and disassemble it. Spot welding it together once assembled would help. 

I can't find photos of the one I made but I'm happy to sketch one up if anyone's interested. 

-josh.


On Mon, Jul 16, 2018 at 4:43 PM, Patrick Gilbery <patrick@bikesaviours.org> wrote:

Here's ours.  Tempe is a high theft environment, so everything is welded on.  We've never been able to keep a pump out there for more than two weeks (even the bike fixtation high security one).

Patrick Gilbery
Shop Manager
Bike Saviours
(602) 429-9369

On Jul 16, 2018 1:04 PM, <thethinktank-request@lists.bikecollectives.org> wrote:
Send Thethinktank mailing list submissions to
        thethinktank@lists.bikecollectives.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.org

or, via email, send a message with subject or body 'help' to
        thethinktank-request@lists.bikecollectives.org

You can reach the person managing the list at
        thethinktank-owner@lists.bikecollectives.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Thethinktank digest..."

Today's Topics:

   1. Best DIY Outdoor Repair Stations? (Aida Mas Baghaie)



---------- Forwarded message ----------
From: Aida Mas Baghaie <aida.masb@gmail.com>
To: The Think Tank <thethinktank@lists.bikecollectives.org>
Cc: 
Bcc: 
Date: Mon, 16 Jul 2018 12:49:38 -0400
Subject: [TheThinkTank] Best DIY Outdoor Repair Stations?
Hey y'all, 

I'm working on a collaboration between an NYC community garden and the Mechanical Gardens Bike Co-op to start a bike repair outpost in a shipping container. Before we get started on building the shop, we'll be making some pedal powered gardening tools, and an outdoor repair station. Do you have an outdoor repair station* for open-access community use at your shop? If so, please send me a photo and I'll compile them into a shared folder :) 

*Just to be clear, I'm not looking for an off-the-shelf solution, but something creative you or someone else made. I've attached a photo of the one at Neighborhood Bike Works in Philly as a reference. 

Thanks bike buds! 

aida 

_______________________________________________
Thethinktank mailing list
Thethinktank@lists.bikecollectives.org
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.org


____________________________________

The ThinkTank mailing List

Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.org