Outdoor public repair stands
Hi all, Has anyone had success with installing and maintaining outdoor repair stations in your community? I am interested in exploring what it would mean to install outside our bike shops, and I am understandably hearing concerns around vandalism/required upkeep. Thank you for any thoughts! Kim Schaffer
Kim Schaffer, Executive Director Community Bike Works www.communitybikeworks.org cell: 484.554.8971
[cid:image002.png@01D63FE8.C9116010]
I can tell you very definitively that I would not get a stand from Saris Infrastructure (formerly Bike Fixation). The pumps are not very durable even when covered and the stands get the tools stolen from them almost immediately in Toronto.
We are lucky here to have a local company called Greenspoke that makes tool stands with heavy duty chains rather than aircraft cable: http://www.gogreenspoke.com/ so I would look at either finding a company that does something similar or designing your own to use similar chains.
On Thu, Jun 11, 2020 at 12:07 PM Kim Schaffer kim@communitybikeworks.org wrote:
Hi all,
Has anyone had success with installing and maintaining outdoor repair stations in your community? I am interested in exploring what it would mean to install outside our bike shops, and I am understandably hearing concerns around vandalism/required upkeep.
Thank you for any thoughts!
Kim Schaffer
Kim Schaffer, Executive Director
Community Bike Works
www.communitybikeworks.org
cell: 484.554.8971
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.or...
That's a nice product. How much?
Sue Prant Community Cycles Boulder, CO
Sent from my phone.
On Thu, Jun 11, 2020, 10:49 AM David Oliver nowhere3@gmail.com wrote:
I can tell you very definitively that I would not get a stand from Saris Infrastructure (formerly Bike Fixation). The pumps are not very durable even when covered and the stands get the tools stolen from them almost immediately in Toronto.
We are lucky here to have a local company called Greenspoke that makes tool stands with heavy duty chains rather than aircraft cable: http://www.gogreenspoke.com/ so I would look at either finding a company that does something similar or designing your own to use similar chains.
On Thu, Jun 11, 2020 at 12:07 PM Kim Schaffer kim@communitybikeworks.org wrote:
Hi all,
Has anyone had success with installing and maintaining outdoor repair stations in your community? I am interested in exploring what it would mean to install outside our bike shops, and I am understandably hearing concerns around vandalism/required upkeep.
Thank you for any thoughts!
Kim Schaffer
Kim Schaffer, Executive Director
Community Bike Works
www.communitybikeworks.org
cell: 484.554.8971
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.or...
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.or...
I believe they are in the $3000 range. I'm unsure if they sell to outside of the Greater Toronto Area though.
On Thu, Jun 11, 2020 at 1:57 PM Sue Prant sue@communitycycles.org wrote:
That's a nice product. How much?
Sue Prant Community Cycles Boulder, CO
Sent from my phone.
On Thu, Jun 11, 2020, 10:49 AM David Oliver nowhere3@gmail.com wrote:
I can tell you very definitively that I would not get a stand from Saris Infrastructure (formerly Bike Fixation). The pumps are not very durable even when covered and the stands get the tools stolen from them almost immediately in Toronto.
We are lucky here to have a local company called Greenspoke that makes tool stands with heavy duty chains rather than aircraft cable: http://www.gogreenspoke.com/ so I would look at either finding a company that does something similar or designing your own to use similar chains.
On Thu, Jun 11, 2020 at 12:07 PM Kim Schaffer kim@communitybikeworks.org wrote:
Hi all,
Has anyone had success with installing and maintaining outdoor repair stations in your community? I am interested in exploring what it would mean to install outside our bike shops, and I am understandably hearing concerns around vandalism/required upkeep.
Thank you for any thoughts!
Kim Schaffer
Kim Schaffer, Executive Director
Community Bike Works
www.communitybikeworks.org
cell: 484.554.8971
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.or...
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.or...
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.or...
Hi Kim, I saw this question and it took me a while to get a response together. I recently built a homebrew bike repair station for Third Hand Bicycle Co-op partially as a result of the impact of Covid-19, and it has been installed and in use for 62 days now.
I thought about the design long before I made this, but when we decided to go ahead it was assembled pretty hastily to get something out there fast. As a result of that, and uncertainty about the usefulness and security of it, I treated it as more prototype than finished product. I didn't invest much in the tools and parts or thoroughly rust proof because there was a risk it would be stolen or destroyed within days. I'm proud to say it has held up well and is still there, although I have ideas for additions and improvements already.
In terms of security it has proved to be at least somewhat theft resistant. Our area does not give the strongest sense of security: we are in a somewhat abandoned industrial area adjacent to many scrap yards, and we have struggled with theft. Our co-op actually had the door sledgehammmered in and burglarized in the time since I installed these tools yet they have remained there. I think the moderate security offered by the steel cables, and mounting bolts, combined with relative cheapness of the tools has kept them there. It seems that rust and wear is going to be a bigger issue to contend with.
Our biggest concern at the time of installing this was virus spread. I installed it with a sign cautioning people to be careful and wash their hands, and I have tried to disinfect the tools almost daily.
I know the tools are getting used based on encounters with people using them when I've come to the shop. I also see abandoned parts and evidence of use around the tools when I go to clean them. I have talked with some people using the tools and gotten questions and input on other tools or equipment they'd like to have available.
Attached is a document with more information about construction of the public tool station, it's not a how-to but maybe a source of ideas and inspiration for someone else wishing to do this. Total cost was about $70 for just the tool station and $100 with the air supply setup (but we had a lot of stuff lying around).
-David Highman Coordinator at Third Hand Bicycle Co-op, Columbus OH DavidAHighman@gmail.com
On Thu, Jun 11, 2020 at 12:06 PM Kim Schaffer kim@communitybikeworks.org wrote:
Hi all,
Has anyone had success with installing and maintaining outdoor repair stations in your community? I am interested in exploring what it would mean to install outside our bike shops, and I am understandably hearing concerns around vandalism/required upkeep.
Thank you for any thoughts!
Kim Schaffer
Kim Schaffer, Executive Director
Community Bike Works
www.communitybikeworks.org
cell: 484.554.8971
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.or...
I thought I already replied to this thread but I guess I didn't. We have had an outdoor workstation since shortly after the pandemic hit, and it's been in constant use day and night. Photos are in our facebook timeline: https://www.facebook.com/Recycleithacasbikes/posts/3149917028406828
One of the clamps became a little loose at one point, but a couple extra long deck screws fixed it just fine.
~cyclista Nicholas
On 2020-06-11 16:06, Kim Schaffer wrote:
Hi all, Has anyone had success with installing and maintaining outdoor repair stations in your community? I am interested in exploring what it would mean to install outside our bike shops, and I am understandably hearing concerns around vandalism/required upkeep. Thank you for any thoughts! Kim Schaffer
Kim Schaffer, Executive Director Community Bike Works www.communitybikeworks.org cell: 484.554.8971
[cid:image002.png@01D63FE8.C9116010]
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.or...
participants (5)
-
Cyclista Nicholas -
David Highman -
David Oliver -
Kim Schaffer -
Sue Prant