Re: [TheThinkTank] Best DIY Outdoor Repair Stations?
Here's ours. Tempe is a high theft environment, so everything is welded on. We've never been able to keep a pump out there for more than two weeks (even the bike fixtation high security one).
Patrick Gilbery Shop Manager Bike Saviours (602) 429-9369 On Jul 16, 2018 1:04 PM, thethinktank-request@lists.bikecollectives.org wrote:
Send Thethinktank mailing list submissions to thethinktank@lists.bikecollectives.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.bikecollectives.org/listinfo.cgi/thethinktank- bikecollectives.org
or, via email, send a message with subject or body 'help' to thethinktank-request@lists.bikecollectives.org
You can reach the person managing the list at thethinktank-owner@lists.bikecollectives.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..."
Today's Topics:
- Best DIY Outdoor Repair Stations? (Aida Mas Baghaie)
---------- Forwarded message ---------- From: Aida Mas Baghaie aida.masb@gmail.com To: The Think Tank thethinktank@lists.bikecollectives.org Cc: Bcc: Date: Mon, 16 Jul 2018 12:49:38 -0400 Subject: [TheThinkTank] Best DIY Outdoor Repair Stations? Hey y'all,
I'm working on a collaboration between an NYC community garden and the Mechanical Gardens Bike Co-op to start a bike repair outpost in a shipping container. Before we get started on building the shop, we'll be making some pedal powered gardening tools, and an outdoor repair station. *Do you have an outdoor repair station* for open-access community use at your shop?* If so, please send me a photo and I'll compile them into a shared folder :)
*Just to be clear, I'm not looking for an off-the-shelf solution, but something creative you or someone else made. I've attached a photo of the one at Neighborhood Bike Works in Philly as a reference.
Thanks bike buds!
aida
Thethinktank mailing list Thethinktank@lists.bikecollectives.org http://lists.bikecollectives.org/listinfo.cgi/thethinktank- bikecollectives.org
Assuming you have access to parts, you can make a two sided repair stand with a couple pairs of drop bars with stems, a BMX or mountain fork, and a base of your choosing.
Cut the dropouts and bottoms off of the fork. The fork will "live" upside down in the finished stand. Seat one stem in each of the forks. Adjust the bars so they're upside down and will cradle the top tube of a frame. Tighten bolts, etc.
If you have a stem that matches the BMX/MTN fork, you can use it to attach the stand to a horizontal bar if it's the correct diameter.
You can also build a freestanding base that's basically the same setup but with BMX bars splayed out almost horizontal so that each grip is one of four "feet" and the base is wide enough to support a bike without being unstable. The only tricky part is connected the two opposing steerer tubes. I used a length of top tube from a discarded frame plus some through bolts. There might be a better way.
I built one of these years ago and it took a couple hours. With more hands helping, it would be much faster. It would definitely add some fun bike flavor to the space and be useful.
And it goes without saying that putting this in an open area where tools live and are accessible leaves it open that someone could come and disassemble it. Spot welding it together once assembled would help.
I can't find photos of the one I made but I'm happy to sketch one up if anyone's interested.
-josh.
On Mon, Jul 16, 2018 at 4:43 PM, Patrick Gilbery patrick@bikesaviours.org wrote:
Here's ours. Tempe is a high theft environment, so everything is welded on. We've never been able to keep a pump out there for more than two weeks (even the bike fixtation high security one).
Patrick Gilbery Shop Manager Bike Saviours (602) 429-9369 On Jul 16, 2018 1:04 PM, thethinktank-request@lists.bikecollectives.org wrote:
Send Thethinktank mailing list submissions to thethinktank@lists.bikecollectives.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.bikecollectives.org/listinfo.cgi/thethinktank-b ikecollectives.org
or, via email, send a message with subject or body 'help' to thethinktank-request@lists.bikecollectives.org
You can reach the person managing the list at thethinktank-owner@lists.bikecollectives.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..."
Today's Topics:
- Best DIY Outdoor Repair Stations? (Aida Mas Baghaie)
---------- Forwarded message ---------- From: Aida Mas Baghaie aida.masb@gmail.com To: The Think Tank thethinktank@lists.bikecollectives.org Cc: Bcc: Date: Mon, 16 Jul 2018 12:49:38 -0400 Subject: [TheThinkTank] Best DIY Outdoor Repair Stations? Hey y'all,
I'm working on a collaboration between an NYC community garden and the Mechanical Gardens Bike Co-op to start a bike repair outpost in a shipping container. Before we get started on building the shop, we'll be making some pedal powered gardening tools, and an outdoor repair station. *Do you have an outdoor repair station* for open-access community use at your shop?* If so, please send me a photo and I'll compile them into a shared folder :)
*Just to be clear, I'm not looking for an off-the-shelf solution, but something creative you or someone else made. I've attached a photo of the one at Neighborhood Bike Works in Philly as a reference.
Thanks bike buds!
aida
Thethinktank mailing list Thethinktank@lists.bikecollectives.org http://lists.bikecollectives.org/listinfo.cgi/thethinktank-b ikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives. org/options.cgi/thethinktank-bikecollectives.org
Yea Josh really interested! I was sketching as I was reading, but not sure I have it.
Can you say something about what welding set up you prefer for such kind of projects?
Ulick Ireland
On Mon 16 Jul 2018 at 22:26, veganboyjosh@gmail.com wrote:
Assuming you have access to parts, you can make a two sided repair stand with a couple pairs of drop bars with stems, a BMX or mountain fork, and a base of your choosing.
Cut the dropouts and bottoms off of the fork. The fork will "live" upside down in the finished stand. Seat one stem in each of the forks. Adjust the bars so they're upside down and will cradle the top tube of a frame. Tighten bolts, etc.
If you have a stem that matches the BMX/MTN fork, you can use it to attach the stand to a horizontal bar if it's the correct diameter.
You can also build a freestanding base that's basically the same setup but with BMX bars splayed out almost horizontal so that each grip is one of four "feet" and the base is wide enough to support a bike without being unstable. The only tricky part is connected the two opposing steerer tubes. I used a length of top tube from a discarded frame plus some through bolts. There might be a better way.
I built one of these years ago and it took a couple hours. With more hands helping, it would be much faster. It would definitely add some fun bike flavor to the space and be useful.
And it goes without saying that putting this in an open area where tools live and are accessible leaves it open that someone could come and disassemble it. Spot welding it together once assembled would help.
I can't find photos of the one I made but I'm happy to sketch one up if anyone's interested.
-josh.
On Mon, Jul 16, 2018 at 4:43 PM, Patrick Gilbery <patrick@bikesaviours.org
wrote:
Here's ours. Tempe is a high theft environment, so everything is welded on. We've never been able to keep a pump out there for more than two weeks (even the bike fixtation high security one).
Patrick Gilbery Shop Manager Bike Saviours (602) 429-9369 On Jul 16, 2018 1:04 PM, thethinktank-request@lists.bikecollectives.org wrote:
Send Thethinktank mailing list submissions to thethinktank@lists.bikecollectives.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...
or, via email, send a message with subject or body 'help' to thethinktank-request@lists.bikecollectives.org
You can reach the person managing the list at thethinktank-owner@lists.bikecollectives.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..."
Today's Topics:
- Best DIY Outdoor Repair Stations? (Aida Mas Baghaie)
---------- Forwarded message ---------- From: Aida Mas Baghaie aida.masb@gmail.com To: The Think Tank thethinktank@lists.bikecollectives.org Cc: Bcc: Date: Mon, 16 Jul 2018 12:49:38 -0400 Subject: [TheThinkTank] Best DIY Outdoor Repair Stations? Hey y'all,
I'm working on a collaboration between an NYC community garden and the Mechanical Gardens Bike Co-op to start a bike repair outpost in a shipping container. Before we get started on building the shop, we'll be making some pedal powered gardening tools, and an outdoor repair station. *Do you have an outdoor repair station* for open-access community use at your shop?* If so, please send me a photo and I'll compile them into a shared folder :)
*Just to be clear, I'm not looking for an off-the-shelf solution, but something creative you or someone else made. I've attached a photo of the one at Neighborhood Bike Works in Philly as a reference.
Thanks bike buds!
aida
Thethinktank mailing list Thethinktank@lists.bikecollectives.org
http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.o...
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.or...
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.or...
Here's a rough sketch in pdf and jpg that should explain it better. It's super simple and obvious once you see one in action. You can wrap the drop bars in tape or even old dead tubes to protect the bike you're working on from getting scratched.
Feel free to offer improvements or suggestions. Again, this wasn't my design. I wish I could remember where I first saw it. It might have been on this list but it's been almost 10 years...
If you have two people working on it, you'll want to weight the BMX bars down with something, especially if they're both working on drive train stuff and using the pedals. A milk crate full of freewheels works great.
On Mon, Jul 16, 2018 at 5:36 PM, Ulick O'Beirne ulickobeirne@gmail.com wrote:
Yea Josh really interested! I was sketching as I was reading, but not sure I have it.
Can you say something about what welding set up you prefer for such kind of projects?
Ulick Ireland
On Mon 16 Jul 2018 at 22:26, veganboyjosh@gmail.com wrote:
Assuming you have access to parts, you can make a two sided repair stand with a couple pairs of drop bars with stems, a BMX or mountain fork, and a base of your choosing.
Cut the dropouts and bottoms off of the fork. The fork will "live" upside down in the finished stand. Seat one stem in each of the forks. Adjust the bars so they're upside down and will cradle the top tube of a frame. Tighten bolts, etc.
If you have a stem that matches the BMX/MTN fork, you can use it to attach the stand to a horizontal bar if it's the correct diameter.
You can also build a freestanding base that's basically the same setup but with BMX bars splayed out almost horizontal so that each grip is one of four "feet" and the base is wide enough to support a bike without being unstable. The only tricky part is connected the two opposing steerer tubes. I used a length of top tube from a discarded frame plus some through bolts. There might be a better way.
I built one of these years ago and it took a couple hours. With more hands helping, it would be much faster. It would definitely add some fun bike flavor to the space and be useful.
And it goes without saying that putting this in an open area where tools live and are accessible leaves it open that someone could come and disassemble it. Spot welding it together once assembled would help.
I can't find photos of the one I made but I'm happy to sketch one up if anyone's interested.
-josh.
On Mon, Jul 16, 2018 at 4:43 PM, Patrick Gilbery < patrick@bikesaviours.org> wrote:
Here's ours. Tempe is a high theft environment, so everything is welded on. We've never been able to keep a pump out there for more than two weeks (even the bike fixtation high security one).
Patrick Gilbery Shop Manager Bike Saviours (602) 429-9369 On Jul 16, 2018 1:04 PM, thethinktank-request@lists.bikecollectives.org wrote:
Send Thethinktank mailing list submissions to thethinktank@lists.bikecollectives.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.bikecollectives.org/listinfo.cgi/thethinktank- bikecollectives.org
or, via email, send a message with subject or body 'help' to thethinktank-request@lists.bikecollectives.org
You can reach the person managing the list at thethinktank-owner@lists.bikecollectives.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..."
Today's Topics:
- Best DIY Outdoor Repair Stations? (Aida Mas Baghaie)
---------- Forwarded message ---------- From: Aida Mas Baghaie aida.masb@gmail.com To: The Think Tank thethinktank@lists.bikecollectives.org Cc: Bcc: Date: Mon, 16 Jul 2018 12:49:38 -0400 Subject: [TheThinkTank] Best DIY Outdoor Repair Stations? Hey y'all,
I'm working on a collaboration between an NYC community garden and the Mechanical Gardens Bike Co-op to start a bike repair outpost in a shipping container. Before we get started on building the shop, we'll be making some pedal powered gardening tools, and an outdoor repair station. *Do you have an outdoor repair station* for open-access community use at your shop?* If so, please send me a photo and I'll compile them into a shared folder :)
*Just to be clear, I'm not looking for an off-the-shelf solution, but something creative you or someone else made. I've attached a photo of the one at Neighborhood Bike Works in Philly as a reference.
Thanks bike buds!
aida
Thethinktank mailing list Thethinktank@lists.bikecollectives.org http://lists.bikecollectives.org/listinfo.cgi/thethinktank- bikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives. org/options.cgi/thethinktank-bikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives. org/options.cgi/thethinktank-bikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives. org/options.cgi/thethinktank-bikecollectives.org
Ah cool. I get it now. Seems really do-able with minimum welding hardware set-up. Nice one!
josh, perhaps a separate tread, would you recommend the best welding set up you could think of to turn these kind of scale projects out all the time?
I know B!KE have some cool ones too. I'll try get a photo from when my mates visited. Or maybe Tegan can share one?
U
On 17 July 2018 at 00:28, veganboyjosh@gmail.com wrote:
Here's a rough sketch in pdf and jpg that should explain it better. It's super simple and obvious once you see one in action. You can wrap the drop bars in tape or even old dead tubes to protect the bike you're working on from getting scratched.
Feel free to offer improvements or suggestions. Again, this wasn't my design. I wish I could remember where I first saw it. It might have been on this list but it's been almost 10 years...
If you have two people working on it, you'll want to weight the BMX bars down with something, especially if they're both working on drive train stuff and using the pedals. A milk crate full of freewheels works great.
On Mon, Jul 16, 2018 at 5:36 PM, Ulick O'Beirne ulickobeirne@gmail.com wrote:
Yea Josh really interested! I was sketching as I was reading, but not sure I have it.
Can you say something about what welding set up you prefer for such kind of projects?
Ulick Ireland
On Mon 16 Jul 2018 at 22:26, veganboyjosh@gmail.com wrote:
Assuming you have access to parts, you can make a two sided repair stand with a couple pairs of drop bars with stems, a BMX or mountain fork, and a base of your choosing.
Cut the dropouts and bottoms off of the fork. The fork will "live" upside down in the finished stand. Seat one stem in each of the forks. Adjust the bars so they're upside down and will cradle the top tube of a frame. Tighten bolts, etc.
If you have a stem that matches the BMX/MTN fork, you can use it to attach the stand to a horizontal bar if it's the correct diameter.
You can also build a freestanding base that's basically the same setup but with BMX bars splayed out almost horizontal so that each grip is one of four "feet" and the base is wide enough to support a bike without being unstable. The only tricky part is connected the two opposing steerer tubes. I used a length of top tube from a discarded frame plus some through bolts. There might be a better way.
I built one of these years ago and it took a couple hours. With more hands helping, it would be much faster. It would definitely add some fun bike flavor to the space and be useful.
And it goes without saying that putting this in an open area where tools live and are accessible leaves it open that someone could come and disassemble it. Spot welding it together once assembled would help.
I can't find photos of the one I made but I'm happy to sketch one up if anyone's interested.
-josh.
On Mon, Jul 16, 2018 at 4:43 PM, Patrick Gilbery < patrick@bikesaviours.org> wrote:
Here's ours. Tempe is a high theft environment, so everything is welded on. We've never been able to keep a pump out there for more than two weeks (even the bike fixtation high security one).
Patrick Gilbery Shop Manager Bike Saviours (602) 429-9369 On Jul 16, 2018 1:04 PM, <thethinktank-request@lists.bi kecollectives.org> wrote:
Send Thethinktank mailing list submissions to thethinktank@lists.bikecollectives.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.bikecollectives.org/listinfo.cgi/thethinktank-b ikecollectives.org
or, via email, send a message with subject or body 'help' to thethinktank-request@lists.bikecollectives.org
You can reach the person managing the list at thethinktank-owner@lists.bikecollectives.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..."
Today's Topics:
- Best DIY Outdoor Repair Stations? (Aida Mas Baghaie)
---------- Forwarded message ---------- From: Aida Mas Baghaie aida.masb@gmail.com To: The Think Tank thethinktank@lists.bikecollectives.org Cc: Bcc: Date: Mon, 16 Jul 2018 12:49:38 -0400 Subject: [TheThinkTank] Best DIY Outdoor Repair Stations? Hey y'all,
I'm working on a collaboration between an NYC community garden and the Mechanical Gardens Bike Co-op to start a bike repair outpost in a shipping container. Before we get started on building the shop, we'll be making some pedal powered gardening tools, and an outdoor repair station. *Do you have an outdoor repair station* for open-access community use at your shop?* If so, please send me a photo and I'll compile them into a shared folder :)
*Just to be clear, I'm not looking for an off-the-shelf solution, but something creative you or someone else made. I've attached a photo of the one at Neighborhood Bike Works in Philly as a reference.
Thanks bike buds!
aida
Thethinktank mailing list Thethinktank@lists.bikecollectives.org http://lists.bikecollectives.org/listinfo.cgi/thethinktank-b ikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.o rg/options.cgi/thethinktank-bikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.o rg/options.cgi/thethinktank-bikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.o rg/options.cgi/thethinktank-bikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives. org/options.cgi/thethinktank-bikecollectives.org
I liked using the one I made in the shop because it showed how reusable things are if you think about them outside of how they were designed. Plus you can bang it around and not sweat too much since it's made of trash and not a $300 pro shop stand.
Re: Welders: it's definitely worth another thread but I bow to the expertise of others on the list when it comes to welding info.
I've taken a class and can identify the different types and know a little about what they do but don't have any outside-of-class experience at all.
On Mon, Jul 16, 2018 at 7:38 PM, Ulick O'Beirne ulickobeirne@gmail.com wrote:
Ah cool. I get it now. Seems really do-able with minimum welding hardware set-up. Nice one!
josh, perhaps a separate tread, would you recommend the best welding set up you could think of to turn these kind of scale projects out all the time?
I know B!KE have some cool ones too. I'll try get a photo from when my mates visited. Or maybe Tegan can share one?
U
On 17 July 2018 at 00:28, veganboyjosh@gmail.com wrote:
Here's a rough sketch in pdf and jpg that should explain it better. It's super simple and obvious once you see one in action. You can wrap the drop bars in tape or even old dead tubes to protect the bike you're working on from getting scratched.
Feel free to offer improvements or suggestions. Again, this wasn't my design. I wish I could remember where I first saw it. It might have been on this list but it's been almost 10 years...
If you have two people working on it, you'll want to weight the BMX bars down with something, especially if they're both working on drive train stuff and using the pedals. A milk crate full of freewheels works great.
On Mon, Jul 16, 2018 at 5:36 PM, Ulick O'Beirne ulickobeirne@gmail.com wrote:
Yea Josh really interested! I was sketching as I was reading, but not sure I have it.
Can you say something about what welding set up you prefer for such kind of projects?
Ulick Ireland
On Mon 16 Jul 2018 at 22:26, veganboyjosh@gmail.com wrote:
Assuming you have access to parts, you can make a two sided repair stand with a couple pairs of drop bars with stems, a BMX or mountain fork, and a base of your choosing.
Cut the dropouts and bottoms off of the fork. The fork will "live" upside down in the finished stand. Seat one stem in each of the forks. Adjust the bars so they're upside down and will cradle the top tube of a frame. Tighten bolts, etc.
If you have a stem that matches the BMX/MTN fork, you can use it to attach the stand to a horizontal bar if it's the correct diameter.
You can also build a freestanding base that's basically the same setup but with BMX bars splayed out almost horizontal so that each grip is one of four "feet" and the base is wide enough to support a bike without being unstable. The only tricky part is connected the two opposing steerer tubes. I used a length of top tube from a discarded frame plus some through bolts. There might be a better way.
I built one of these years ago and it took a couple hours. With more hands helping, it would be much faster. It would definitely add some fun bike flavor to the space and be useful.
And it goes without saying that putting this in an open area where tools live and are accessible leaves it open that someone could come and disassemble it. Spot welding it together once assembled would help.
I can't find photos of the one I made but I'm happy to sketch one up if anyone's interested.
-josh.
On Mon, Jul 16, 2018 at 4:43 PM, Patrick Gilbery < patrick@bikesaviours.org> wrote:
Here's ours. Tempe is a high theft environment, so everything is welded on. We've never been able to keep a pump out there for more than two weeks (even the bike fixtation high security one).
Patrick Gilbery Shop Manager Bike Saviours (602) 429-9369 On Jul 16, 2018 1:04 PM, <thethinktank-request@lists.bi kecollectives.org> wrote:
Send Thethinktank mailing list submissions to thethinktank@lists.bikecollectives.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.bikecollectives.org/listinfo.cgi/thethinktank-b ikecollectives.org
or, via email, send a message with subject or body 'help' to thethinktank-request@lists.bikecollectives.org
You can reach the person managing the list at thethinktank-owner@lists.bikecollectives.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..."
Today's Topics:
- Best DIY Outdoor Repair Stations? (Aida Mas Baghaie)
---------- Forwarded message ---------- From: Aida Mas Baghaie aida.masb@gmail.com To: The Think Tank thethinktank@lists.bikecollectives.org Cc: Bcc: Date: Mon, 16 Jul 2018 12:49:38 -0400 Subject: [TheThinkTank] Best DIY Outdoor Repair Stations? Hey y'all,
I'm working on a collaboration between an NYC community garden and the Mechanical Gardens Bike Co-op to start a bike repair outpost in a shipping container. Before we get started on building the shop, we'll be making some pedal powered gardening tools, and an outdoor repair station. *Do you have an outdoor repair station* for open-access community use at your shop?* If so, please send me a photo and I'll compile them into a shared folder :)
*Just to be clear, I'm not looking for an off-the-shelf solution, but something creative you or someone else made. I've attached a photo of the one at Neighborhood Bike Works in Philly as a reference.
Thanks bike buds!
aida
Thethinktank mailing list Thethinktank@lists.bikecollectives.org http://lists.bikecollectives.org/listinfo.cgi/thethinktank-b ikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.o rg/options.cgi/thethinktank-bikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.o rg/options.cgi/thethinktank-bikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.o rg/options.cgi/thethinktank-bikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives.o rg/options.cgi/thethinktank-bikecollectives.org
The ThinkTank mailing List
Unsubscribe from this list here: http://lists.bikecollectives. org/options.cgi/thethinktank-bikecollectives.org
participants (3)
-
Patrick Gilbery -
Ulick O'Beirne -
veganboyjosh＠gmail.com