TheThinkTank April 2008

thethinktank@lists.bikecollectives.org

35 participants
44 discussions

Suntour Shop tools
by BovineOaks＠aol.com 01 Apr '08

01 Apr '08

The two or four pronged tools and BMX four pronged tools need to be held in place by either the Quick release or the axle nut. The tool only needs to be held tight for only the first 1/4 of a turn when you are loosening it. After that you can unscrew it with your bare hand. I have had my Suntour tools for 23 year and used them in four bike programs on a couple hundred bikes, I have only broken one. It broke into five pieces when three of us tried to break a stuck freewheel off a bike. Always use anti seize on your threads where two dissimilar metals come together, or grease if you do not know about better products. Suntour tools should never slip if they are used correctly. **************Create a Home Theater Like the Pros. Watch the video on AOL Home. (http://home.aol.com/diy/home-improvement-eric-stromer?video=15&ncid=aolhom0…)

1 0

Re: [TheThinkTank] On Shop tools
by troy neiman 01 Apr '08

01 Apr '08

We come across the same problems also. We use the Park PC3 chain tools and have to replace the pins fairly regularly (and find that many people that say they know how to use them may not really know how...so watching for the first few seconds helps). You can also buy direct from Park Tools replacement parts which has been very helpful when you can replace just the chain tool handle or just the T shaped screw part. The parts are about half the price of a new tool and less waste. Same goes for any of Park Tools products such as crank arm extractors and bike repair stand arms, etc. You can get a parts catalog for free through QBP and I assume through Park but you don't need any account to order from Park directly. the pump? I am at a loss but the silca seems to hold up the best for Schroeder valve using the little brass screw type head. Troy BICASTucson AZ ----- Original Message ----- From: "Mario Bruzzone" To: "The Think Tank" Subject: Re: [TheThinkTank] On Shop tools Date: Mon, 31 Mar 2008 11:10:01 -0700 With the Park Tools, you can replace just the pins--it's usually much cheaper (and creates less waste!) than buying a whole new tool. But yes, those are things that break all the time for us as well. Cheers, Mario Bruzzone Bike Kitchen San Francisco On Mon, Mar 31, 2008 at 9:53 AM, Sherief <sgaber(a)gmail.com> wrote: Hello all, This is Sherief from the Austin Yellowbike, and I was hoping to pool the thinktank's experience with shop tools prone to breakage and the like. We're currently having huge issues keeping up with Chain Tools and Presta Valve pumps especially... it feels like not a week goes by without at least one of each of these tools breaking. W/r/t the chain tools, we recently switched from the nicer Park tools to the cheapest we could get out of the catalog, but with the way those break there's effectively no net savings and even when they are functioning the new cheap ones are no good. We try to make sure people know how to use the tools before they do, etc. But my question(s) today is: Do people have any similar experience out there with broken/breakable tools-- specifically good ways to prevent these breakages? Does anyone have any recommendations for good chain tools /PV pumps that can withstand a bit of overeager volunteerin g? Best, Sherief _______________________________________________ Thethinktank mailing list Thethinktank(a)bikecollectives.org http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… _______________________________________________ Thethinktank mailing list Thethinktank(a)bikecollectives.org http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… -- Want an e-mail address like mine? Get a free e-mail account today at www.mail.com!

5 4

Re: [TheThinkTank] ***DHSPAM*** Re: On Shop tools
by Velocipede Bike Project 01 Apr '08

01 Apr '08

as for pumps I've had good luck with topeak two sided pumps. They are pretty durable and it's easy to get new parts for them if they break or go missing(you can order a repair kit from QBP, or just seperate parts), and they make sense to people. (I've had good luck with the specialized pump as well, but it can be harder to get parts for them) We had afew silca headed pumps that were donated to us and all of them have parts missing because people don't know how to use them. It constantly blows my mind how many people out there have no idea how to pump up a tire!!!!! I've thought about attaching laminated cards to the pumps with instructions on proper use, but haven't gotten that together yet.... Still, no matter how well you care for a pump, the rubber fitting in the head will eventually wear out, so it's nice to know that you can easily find the replacement... On a slightly different note, how do you guys label your freewheel and bottom bracket tools? We've had more problems with those going missing and getting stripped than any other tool in the shop. Especially the very similar shimano splined FW tool, and the Falcon/atomic Splined FW tool. They look the same, but if you use the wrong one you strip the tool, plus, the only way to tell which one you need is to read the label on the free wheel itself..... also those Suntour two prong FW removers strip all the time if you don't use them right.....any ideas on this would be great!! -beth velocipede bike project baltimore, md > We come across the same problems also. We use the Park PC3 chain tools > and have to replace the pins fairly regularly (and find that many people > that say they know how to use them may not really know how...so watching > for the first few seconds helps). You can also buy direct from Park Tools > replacement parts which has been very helpful when you can replace just > the chain tool handle or just the T shaped screw part. The parts are > about half the price of a new tool and less waste. Same goes for any of > Park Tools products such as crank arm extractors and bike repair stand > arms, etc. You can get a parts catalog for free through QBP and I assume > through Park but you don't need any account to order from Park directly. > the pump? I am at a loss but the silca seems to hold up the best for > Schroeder valve using the little brass screw type head. Troy BICASTucson > AZ > > ----- Original Message ----- > From: "Mario Bruzzone" > To: "The Think Tank" > Subject: Re: [TheThinkTank] On Shop tools > Date: Mon, 31 Mar 2008 11:10:01 -0700 > > With the Park Tools, you can replace just the pins--it's usually much > cheaper (and creates less waste!) than buying a whole new tool. > > But yes, those are things that break all the time for us as well. > > Cheers, > Mario Bruzzone > Bike Kitchen > San Francisco > > > On Mon, Mar 31, 2008 at 9:53 AM, Sherief <sgaber(a)gmail.com> wrote: > > Hello all, > > This is Sherief from the Austin Yellowbike, and I was hoping to > pool the thinktank's experience with shop tools prone to breakage > and the like. We're currently having huge issues keeping up with > Chain Tools and Presta Valve pumps especially... it feels like > not a week goes by without at least one of each of these tools > breaking. W/r/t the chain tools, we recently switched from the > nicer Park tools to the cheapest we could get out of the catalog, > but with the way those break there's effectively no net savings > and even when they are functioning the new cheap ones are no > good. We try to make sure people know how to use the tools > before they do, etc. But my question(s) today is: Do people have > any similar experience out there with broken/breakable tools-- > specifically good ways to prevent these breakages? Does anyone > have any recommendations for good chain tools /PV pumps that can > withstand a bit of overeager volunteerin g? > > > Best, > Sherief > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > -- > Want an e-mail address like mine? > Get a free e-mail account today at www.mail.com! > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… >

1 0

Re: [TheThinkTank] Thethinktank Digest, Vol 19, Issue 34
by Tom Emm 31 Mar '08

31 Mar '08

Pat I have the advert re: big ride sat apr 12, i will tell don also. here's is something i thought interesting regaring shop tools \ it looks as though every body has similar problems. Tom thethinktank-request(a)bikecollectives.org wrote: Send Thethinktank mailing list submissions to thethinktank(a)bikecollectives.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… or, via email, send a message with subject or body 'help' to thethinktank-request(a)bikecollectives.org You can reach the person managing the list at thethinktank-owner(a)bikecollectives.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..." Today's Topics: 1. On Shop tools (Sherief) 2. Re: On Shop tools (joshua muir) 3. Re: On Shop tools (Mark Rehder) 4. Re: On Shop tools (Mario Bruzzone) 5. Re: On Shop tools (Jonathan Morrison) ---------------------------------------------------------------------- Message: 1 Date: Mon, 31 Mar 2008 11:53:05 -0500 From: Sherief Subject: [TheThinkTank] On Shop tools To: Thethinktank(a)bikecollectives.org Message-ID: <6f24d4530803310953n69ccb215h3f893d96c17ab91f(a)mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" Hello all, This is Sherief from the Austin Yellowbike, and I was hoping to pool the thinktank's experience with shop tools prone to breakage and the like. We're currently having huge issues keeping up with Chain Tools and Presta Valve pumps especially... it feels like not a week goes by without at least one of each of these tools breaking. W/r/t the chain tools, we recently switched from the nicer Park tools to the cheapest we could get out of the catalog, but with the way those break there's effectively no net savings and even when they are functioning the new cheap ones are no good. We try to make sure people know how to use the tools before they do, etc. But my question(s) today is: Do people have any similar experience out there with broken/breakable tools-- specifically good ways to prevent these breakages? Does anyone have any recommendations for good chain tools /PV pumps that can withstand a bit of overeager volunteering? Best, Sherief

1 0

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

TheThinkTank April 2008