TheThinkTank December 2017

thethinktank@lists.bikecollectives.org

20 participants
16 discussions

Reusable Repair Checklist Tag
by director 02 May '23

02 May '23

Hey All, We just spent some time and redid the tag we use to track repairs on a bike. I'm sure your shops are similar to ours in that many mechanics of varying skill levels will work on a single bike before it's distributed back to the world for use. This make it challenging to ensure a standard of quality on any given bike leaving the shop. As we fleshed out the tag we realized that it could function loosely as a curriculum. For most mechanics, especially students we suggest starting at the top and working down the list. I've come to realize that no two mechanics will do things in the exact same way, everyone has their own style. We've been suggesting that folks do the first two items in order and then address the rest of the repairs at their discretion. Of course we couldn't put everything on a half page so we had to make compromises. You'll notice as you get closer to the bottom of the tag the categories are a little more broad and don't get into the finer details. We're working on a final check list that will include finer details like checking bearing play, tire wear, fine tune derailleurs and brakes... The final checklist won't hang on the bike but it'll be around the shop and part of our training. Stay tuned for this. We print these double sided, cut them in half and laminate them. We hang them on the handlebars and fill them out with a Sharpie. When the bike is done and gone we clean the Sharpie off with 90% rubbing alcohol and a rag. This allows us to use one tag over and over and over. We've been using these tags for about 2 weeks now and it's been awesome. Communication between mechanics is much clearer and bikes are getting done faster. It's really helped orient Earn-A-Bike students to what needs to be done next on their bike. Anyway if you think it's a good idea feel free to adapt it to your shops needs. -- Ride On! Rich Points http://communitycycles.org Executive Director (c)303-589-0597 (w)720-565-6019 Community Cycles is Boulder's only bike shop dedicated to bike commuting. Find us on facebook https://www.facebook.com/CommunityCycles

5 4

no boys allowed zine from bikebike?
by veganboyjosh＠gmail.com 27 Sep '18

27 Sep '18

hey all, i'm looking to get in touch with the person who wrote/published the "no boys allowed" zine which was passed out at bikebike in san francisco. it was part of one of the oppression and gender identity issues workshops. we're looking to start a women's night here at community cycles, and i'd like to scan my copy as a pdf and email it to potential volunteers, as well as make some copies to have in the shop... if you're on the list, or if you know the person who wrote it (her name escapes me), please get in touch with me off list... thanks! josh. community cycles boulder

12 25

Liability Waivers
by John Kovalchik 11 Jan '18

11 Jan '18

Looking for some examples of liability waivers for repairs and/or totally gifted bikes. I work with a group of folks that flip bikes and do repairs for individuals in need. Unfortunately we are only able to operate at our space for a few hours at a time and usually cannot store or take bikes over night. Due to the severe disrepair of some of the bikes we come across and our limited time with them often we are not able to get them in the complete repair that we would hope. Any co ops or collectives out there use these? What should or should not be included? Thanks

8 7

Happy New Year Everyone!
by cyclista＠inventati.org 31 Dec '17

31 Dec '17

We all do such wonderful and important work, and I'd like to wish very one of you the best for the new year. Here's to able spirits, exciting work, good times, and profound development for every one of us and our projects in 2018!!!! Ride On! ~cyclista Nicholas :)

1 0

Job Opporutnity:Education/Outreach Coordinator
by Andy Fry 29 Dec '17

29 Dec '17

*Send resumes or questions to andy(a)cycleproject.org <andy(a)cycleproject.org>* *Job Description *- Education, Outreach, and Advocacy Coordinator Time Commitment: 20 hours/week, three-month probationary period Compensation: $13.75 hourly Reports to: President, Board of Directors *Responsibilities*: The Education, Outreach and Advocacy Coordinator will be responsible for overseeing all the activities happening at or near the Topeka Community Cycle Project, at 801 NE Poplar. This person’s responsibilities will include, but may not be limited to, BLAST support and enhancement, bicycle safety educator, public outreach coordinator and local advocate for bicycling access and infrastructure. Any responsibilities listed here may be delegated if an appropriate party is identified. *BLAST Support and Enhancemen*t- providing support to PE instructors in implementing BLAST curriculum and implementing trailer and bike fleet scheduling to maximize use and availability of BLAST resources to Topeka and Shawnee County. *Bicycle Safety Educator*- providing educational programming and bicycle promotional events to spur bicycling activity by “interested, but concerned” potential bicycle riders; enhancing access and bicycle ridership in Topeka. *Public Outreach Coordinator*- providing educational and bicycle resources in remote and community hubs where there is interest in the community. Bringing bicycles and best safety practices to the neighborhoods of Topeka and Shawnee County through grassroots and community events and community locations. *Local Advocate-* participating in community discussions, committees on active transportation, bicycling and active wellness pursuits. Also reaching beyond traditional bicycle specific discussions and attending MTPO and other meetings and public forums to integrate bicycle perspectives into a larger transportation and city planning and development discussion . *Skills necessary*: -LCI certification: ability to complete League of American Bicyclists Traffic Skills and LCI Certification, as it’s offered, within 6 months. -Familiarity with current social media platforms and Microsoft Office and Adobe products -Comfort with speaking in front of groups and presenting new ideas in a group setting. -Coordinating and engaging volunteers, in addition to a willingness to help in seeking funds to keep the position and organization sustained on a perpetual basis. *Topeka Community Cycle Project, 801 NE Poplar St. Topeka KS 66606*

1 0

Patron Bill of Rights (consider adopting)
by Angel York 24 Dec '17

24 Dec '17

This is a fantastic sign that illustrates excellent teaching practices, and many shops that don't have something similar would do well, in my opinion, to include something similar. As a patron of SPOKELAND, you have the right to the following - To pursue your own goals for your own bike - To be in control of the tools used on your bike - To always be asked before someone touches your bike - To ask & receive assistance from shop staff - To work on your bike in a SAFER SPACE [there is also a standard safer space agreement] - To be supported in your learning - To learn with staff

3 2

What's New at Cycle-RE-Cycle
by Cycle-Re-Cycle 23 Dec '17

23 Dec '17

https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b… Facebook (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b… Twitter (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b… Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) BUILDING UPDATE - WE NEED YOUR HELP! We recently signed the papers on our new headquarters at 159 East Napier, and there is A LOT of work that needs to be done. In order for our new home to be up-and-running for next spring we have to raise $50,000 for much-needed building renovations. Donate to our New Building Fund today! (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) All donations will go directly to support our new building and are tax deductible. CYCLE-RE-CYCLE IN THE NEWS ** CYCLE-RE-CYCLE LANDS NEW, LARGER, HIGH VISIBILITY DIGS ------------------------------------------------------------ By Pat Moody | Posted December 1, 2017 As the song goes, “when I get knocked down, I get up again,” and that’s exactly the attitude and plan for our friends at Cycle-Re-Cycle of Benton Harbor. READ MORE (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** CYCLE-RE-CYCLE Recycles building ------------------------------------------------------------ By LOUISE WREGE - HP Staff Writer | Posted December 9, 2017 What started in the garages of two St. Joseph neighbors in 2010 soon blossomed into Cycle-Re-Cycle, which rented space on Main Street near the back of a parking lot in Benton Harbor for $1 a month. READ MORE (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) CALL FOR VOLUNTEERS MAKE A DIFFERENCE IN 2018 Join us in making 2018 an exciting year for Cycle-RE-Cycle. We need volunteers to help with everything from bike mechanics to social media and grant writing, just let us know how you can bring your talents to CRC! Start Volunteering (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) THANK YOU SHOUTOUTS!! ** POWELL CONSTRUCTION ------------------------------------------------------------ Powell Construction has been instrumental in securing our new building and getting it up-and-running. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** SCORE ------------------------------------------------------------ Score, a volunteer business mentoring organization has worked closely with CRC to secure our new building and get our fundraising efforts running smoothly. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** HOLT BOSSE ------------------------------------------------------------ Holt Bosse has lent their support and marketing expertise to our organization, getting us ready for the next phase of Cycle-RE-Cycle. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** BENTON HARBOR LIONS FOUNDATION ------------------------------------------------------------ We would like to say thank you for your generous grant funding of $500 to our building fund. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** HORIZON BANK ------------------------------------------------------------ Thank you so much to Horizon Bank for the funding for the purchase of our new building. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** PASSARO, KAHNE & TAYLOR LAW OFFICES, P.L.L.C ------------------------------------------------------------ Thank you to our friends at Passaro, Kahne & Taylor Law Offices, P.L.L.C for providing their law expertise to us as we purchased our new building. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** FREDERICK S. UPTON FOUNDATION ------------------------------------------------------------ We want to say thank you for your generous grant for building renovations. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ============================================================ ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) Copyright © 2017 CRC, All rights reserved. You are receiving this email because you made a purchase from Cycle-RE-Cycle. Our mailing address is: CRC P.O. Box 1022 Benton Harbor, MI 49023 USA Want to change how you receive these emails? You can ** update your preferences (https://cycle-re-cycle-swm.us15.list-manage.com/profile?u=1e2651ac4b66b1b63…) or ** unsubscribe from this list (https://cycle-re-cycle-swm.us15.list-manage.com/unsubscribe?u=1e2651ac4b66b…) . Email Marketing Powered by MailChimp http://www.mailchimp.com/monkey-rewards/?utm_source=freemium_newsletter&utm…

2 1

Displaying Freewheel & Cassette Tools, spline tree and helm pix
by Bob Giordano 15 Dec '17

15 Dec '17

Attached are pix of the 'Spline Tree' and 'Helm' I spoke of in last email Bob Giordano wrote: All sounds good, the only new thing I'll add is a handy 'tool' we made: welded the FR1 freewheel remover to a small steel plate, then bolted the plate to a wall, right next to our truing stands and cone wrenches. Several times a day it's used: push the wheel onto the tool, spin counterclockwise and off comes the free wheel. our 1st one lasted 2 years til too stripped, then made another. Other than that, all other FW, Cassette and BB removers are on a spinning carousel we call the 'spline tree'. -- Bob Giordano Free Cycles Missoula Shop: 732 S. 1st St. West, ph. 541.7284 10AM-6PM Tues-Sat, www.freecycles.org Missoula Institute for Sustainable Transportation www.strans.org, mist(a)strans.org, 406.830.7676 > On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com > <mailto:jbisker@gmail.com>> wrote: > Heyyo! I've been in co-ops where they have neat ways of displaying the > various freewheel and cassette tools, like on a board next to the hub types > they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled > unhelpfully all together in a bin like we do?) Send a pic of what you got! > > tldr: show us your rad way of housing freewheel/cassette tools that makes it > easy for folks to find the right one. > > EXTRA CREDIT: same question re bottom bracket tools! > > xoxo > > Josh > > > Josh Bisker > 914-500-9890 <tel:(914)%20500-9890> > New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> > 596 Acres <http://596acres.org/> > Bindlestiff Family Cirkus <http://bindlestiff.org/>

1 0

Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette Tools (Nicole Muratore)
by Nicole Muratore 13 Dec '17

13 Dec '17

In a corner of our shop we keep specialty or large tools on both a labeled board and in toolboxes. For patrons new to our shop or unfamiliar with the tools, volunteers usually grab the tools. Otherwise, we keep everything labeled and (hopefully) easy enough for folks to find. Pics attached! Cheers, Nicole Muratore Bike Saviours Collective, Inc. http://www.bikesaviours.org Admin / Volunteer Coordinator (602) 429-9369 On Wed, Dec 13, 2017 at 2:07 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. An Easy One! Displaying Freewheel & Cassette Tools (Josh Bisker) > 2. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Ainsley Naylor) > 3. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Gabriel Trainer) > 4. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Jean-Fran?ois Caron) > > > ---------- Forwarded message ---------- > From: Josh Bisker <jbisker(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 01:31:25 -0500 > Subject: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette Tools > Heyyo! I've been in co-ops where they have neat ways of displaying the > various freewheel and cassette tools, like on a board next to the hub types > they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled > unhelpfully all together in a bin like we do?) Send a pic of what you got! > > tldr: show us your rad way of housing freewheel/cassette tools that makes > it easy for folks to find the right one. > > EXTRA CREDIT: same question re *bottom bracket tools!* > > xoxo > > Josh > > > Josh Bisker > 914-500-9890 <(914)%20500-9890> > New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> > 596 Acres <http://596acres.org/> > Bindlestiff Family Cirkus <http://bindlestiff.org/> > > > ---------- Forwarded message ---------- > From: Ainsley Naylor <needleandthread(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 10:41:47 -0500 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > Because these are the type of tools which are SMALL, important, easy to > break/strip, and not always cheap (hello, did you order a Maillard french > freewheel tool off of the internet because they are super hard to find???) > we DO keep ours in a closed bin on the table with our vices. > Bottom bracket tools are actually kept in our special tool area at the > front of the shop because if people can grab stuff they are more likely to > break it :( Hell even volunteer who do know how to use these tools properly > still abuse and break them. > > I guess generally we expect that volunteer will determine what tool is > required for a repair and retrieve and explain it, rather than people > figuring it out/finding it for themselves.... > > NOT THE ANSWER YOU WANTED SORRY JOSH!!!! > > Ainsley. > > On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: > >> Heyyo! I've been in co-ops where they have neat ways of displaying the >> various freewheel and cassette tools, like on a board next to the hub types >> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >> unhelpfully all together in a bin like we do?) Send a pic of what you got! >> >> tldr: show us your rad way of housing freewheel/cassette tools that makes >> it easy for folks to find the right one. >> >> EXTRA CREDIT: same question re *bottom bracket tools!* >> >> xoxo >> >> Josh >> >> >> Josh Bisker >> 914-500-9890 <(914)%20500-9890> >> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >> 596 Acres <http://596acres.org/> >> Bindlestiff Family Cirkus <http://bindlestiff.org/> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > ---------- Forwarded message ---------- > From: Gabriel Trainer <getrainer(a)bikefarm.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 11:59:24 -0800 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > At Bike Farm we have all of the freewheel and cassette tools laid out on a > magnetic strip so you can see the different shapes easily. Still a guess > and check method, but better than a bin of tools thrown together. > Gabriel > > On Dec 13, 2017 7:41 AM, "Ainsley Naylor" <needleandthread(a)gmail.com> > wrote: > >> Because these are the type of tools which are SMALL, important, easy to >> break/strip, and not always cheap (hello, did you order a Maillard french >> freewheel tool off of the internet because they are super hard to find???) >> we DO keep ours in a closed bin on the table with our vices. >> Bottom bracket tools are actually kept in our special tool area at the >> front of the shop because if people can grab stuff they are more likely to >> break it :( Hell even volunteer who do know how to use these tools properly >> still abuse and break them. >> >> I guess generally we expect that volunteer will determine what tool is >> required for a repair and retrieve and explain it, rather than people >> figuring it out/finding it for themselves.... >> >> NOT THE ANSWER YOU WANTED SORRY JOSH!!!! >> >> Ainsley. >> >> On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: >> >>> Heyyo! I've been in co-ops where they have neat ways of displaying the >>> various freewheel and cassette tools, like on a board next to the hub types >>> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >>> unhelpfully all together in a bin like we do?) Send a pic of what you got! >>> >>> tldr: show us your rad way of housing freewheel/cassette tools that >>> makes it easy for folks to find the right one. >>> >>> EXTRA CREDIT: same question re *bottom bracket tools!* >>> >>> xoxo >>> >>> Josh >>> >>> >>> Josh Bisker >>> 914-500-9890 <(914)%20500-9890> >>> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >>> 596 Acres <http://596acres.org/> >>> Bindlestiff Family Cirkus <http://bindlestiff.org/> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > ---------- Forwarded message ---------- > From: "Jean-François Caron" <jfcaron3(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 14:54:38 -0600 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > At the Bike Kitchen in Vancouver (from what I recall, having left over a > year ago), we only had the common Shimano-style freewheel and cassette > tools. The freewheel tool has a hole in it, so we just put it on a nail in > the wall, the cassette tool has a steel rod, so we stuck it in a hole in > the wall next to the aforementioned nail. > > Anything other than the standard Shimano-style tools, you had to ask a > mechanic to get it behind the counter. This is both because it's less > confusing for newbies who 99% have the Shimano style, but also because a > lot of the other styles are much easier to strip, e.g. the two-knotch > Suntour. > > Y'all know the trick about keeping the freewheel tool engaged with a nut > right? > > Jean-François > > On Dec 13, 2017, at 13:59 , Gabriel Trainer <getrainer(a)bikefarm.org> > wrote: > > At Bike Farm we have all of the freewheel and cassette tools laid out on a > magnetic strip so you can see the different shapes easily. Still a guess > and check method, but better than a bin of tools thrown together. > Gabriel > > On Dec 13, 2017 7:41 AM, "Ainsley Naylor" <needleandthread(a)gmail.com> > wrote: > >> Because these are the type of tools which are SMALL, important, easy to >> break/strip, and not always cheap (hello, did you order a Maillard french >> freewheel tool off of the internet because they are super hard to find???) >> we DO keep ours in a closed bin on the table with our vices. >> Bottom bracket tools are actually kept in our special tool area at the >> front of the shop because if people can grab stuff they are more likely to >> break it :( Hell even volunteer who do know how to use these tools properly >> still abuse and break them. >> >> I guess generally we expect that volunteer will determine what tool is >> required for a repair and retrieve and explain it, rather than people >> figuring it out/finding it for themselves.... >> >> NOT THE ANSWER YOU WANTED SORRY JOSH!!!! >> >> Ainsley. >> >> On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: >> >>> Heyyo! I've been in co-ops where they have neat ways of displaying the >>> various freewheel and cassette tools, like on a board next to the hub types >>> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >>> unhelpfully all together in a bin like we do?) Send a pic of what you got! >>> >>> tldr: show us your rad way of housing freewheel/cassette tools that >>> makes it easy for folks to find the right one. >>> >>> EXTRA CREDIT: same question re *bottom bracket tools!* >>> >>> xoxo >>> >>> Josh >>> >>> >>> Josh Bisker >>> 914-500-9890 <(914)%20500-9890> >>> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >>> 596 Acres <http://596acres.org/> >>> Bindlestiff Family Cirkus <http://bindlestiff.org/> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > >

1 0

An Easy One! Displaying Freewheel & Cassette Tools
by Josh Bisker 13 Dec '17

13 Dec '17

Heyyo! I've been in co-ops where they have neat ways of displaying the various freewheel and cassette tools, like on a board next to the hub types they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled unhelpfully all together in a bin like we do?) Send a pic of what you got! tldr: show us your rad way of housing freewheel/cassette tools that makes it easy for folks to find the right one. EXTRA CREDIT: same question re *bottom bracket tools!* xoxo Josh Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

6 5

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

TheThinkTank December 2017