- TheThinkTank - lists.bikecollectives.org

Re: [TheThinkTank] Bike Trailer for Transporting Bikes
by cyclista＠inventati.org 22 Oct '17

22 Oct '17

Oops!! Didn't cc the list. Also forgot to add that u-post used for fencing is dirt cheap, and if you get wide enough ones, would make excellent channels. -Cyclista On 2017-10-19 20:22, cyclista(a)inventati.org wrote: > Anna, > > A go-to hauling method for me is always an adapted child trailer. > Interestingly, when I went to look at the Pedal to the People trailer, > the construction was basically the same, just enlarged and reinforced > a little. The kickstand on the linkage was a clever addition that I > plan to add to my trailers. > > How many you can haul without a motor is also a matter of your > terrain. If you're mostly in flatland, you can haul quite a lot, and > on that kind of terrain I've hauled as many as ten framesets or so, > which would translate weight-wise into at least four bikes, if not > more. > > I've always just piled them up strategically. BUT - I've had a plan > for awhile now to basically replicate the car roof rack device, which > is often a flimsier version of the device used on the fronts of city > buses, and attach it to one of my trailer setups. > > I estimate that without modifying the child trailer's frame I could > easily fit three bikes, if they were flipped so that the handlebars > aren't running into each other. In other words, one facing backwards > and two facing forwards (or the opposite). > > So, you could either acquire some roof rack tracks by donation - put > out the call and I bet you'll get them - or at a thrift store or > Craigslist or whatever. > > Or you could do what I've been planning and get some angle (L cross > section) bar stock, preferably aluminum, and make your own channels. > > The tricky part is replicating the grabber used on buses that goes > over the front wheel. I'd probably just make the whole thing using > telescoping tubes and a spring from the hardware store, and make the > hook out of whatever, but other people might have some ideas on > cheaper or simpler ways to hold the bike up and in the tracks. I'd > love to hear them!! > > -Cyclista > > > On 2017-10-19 20:03, Anna Weier wrote: >> I was thinking of about 4 at a time, but I would also be happy with 2. >> >> Anna >> >> Anna Weier >> UMCycle Manager >> University of Manitoba Students' Union >> tel: 204.474.8484 >> @MyUMSU >> >> >> >> -----Original Message----- >> From: cyclista(a)inventati.org [mailto:cyclista@inventati.org] >> Sent: October 19, 2017 2:53 PM >> To: The Think Tank <thethinktank(a)lists.bikecollectives.org> >> Cc: Anna Weier <Anna.Weier(a)umsu.ca> >> Subject: Re: [TheThinkTank] Bike Trailer for Transporting Bikes >> >> Anna, >> >> How many bikes do you need to transport at a time? >> >> -Cyclista >> >> >> On 2017-10-19 19:17, Anna Weier wrote: >>> Hi folks, >>> I'm on a campus where our main location is small and our warehouse >>> location is far enough away that it's a pain to bring parts and bikes >>> back and forth. I'm looking for plans or the actual trailer for sale >>> for a bike trailer that can carry complete bikes. I would also be >>> interested in hearing from folks who have transported bikes by bike. >>> Is this a situation where an e-bike might be required? >>> >>> Anna >>> >>> Anna Weier >>> UMCycle Manager >>> University of Manitoba Students' Union >>> tel: 204.474.8484, website: >>> umsu.ca<http://umsu.ca/businesses/umcycle/> >>> Shop Hours: Monday - Friday, 10:30am - 1:30pm Community Stand Time: >>> Thursday, 1:30 - 4pm >>> 101 University Centre, U of Manitoba, Winnipeg, MB, R3T 2N2 >>> @MyUMSU<https://www.instagram.com/myumsu/> >>> [IQsOpen_EmailSig_250x90]<https://umsu.ca/businesses/iqs/> >>> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: >>> http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollecti >>> ves.org

3 2

Bike Trailer for Transporting Bikes
by Anna Weier 19 Oct '17

19 Oct '17

Hi folks, I'm on a campus where our main location is small and our warehouse location is far enough away that it's a pain to bring parts and bikes back and forth. I'm looking for plans or the actual trailer for sale for a bike trailer that can carry complete bikes. I would also be interested in hearing from folks who have transported bikes by bike. Is this a situation where an e-bike might be required? Anna Anna Weier UMCycle Manager University of Manitoba Students' Union tel: 204.474.8484, website: umsu.ca<http://umsu.ca/businesses/umcycle/> Shop Hours: Monday - Friday, 10:30am - 1:30pm Community Stand Time: Thursday, 1:30 - 4pm 101 University Centre, U of Manitoba, Winnipeg, MB, R3T 2N2 @MyUMSU<https://www.instagram.com/myumsu/> [IQsOpen_EmailSig_250x90]<https://umsu.ca/businesses/iqs/>

2 1

Re: [TheThinkTank] mobile workshop?
by Rick Nonnekes 17 Oct '17

17 Oct '17

Mikey, Cycle Transitions is having challenges finding a suitable location at a reasonable cost so we're looking at alternative models to the traditional fixed location. One of these is a storage unit plus a mobile workshop - whether that be a smaller one pulled by a bike or a larger one either pulled by a vehicle or is a panel van of sorts. Ideally the unit would be able to meet the needs of servicing most repairs and and/or have the equipment for the safe cycling courses we do out on location. Rick Cycle Transitions On Oct 11, 2017 2:21 PM, "Michael Young" <michael(a)westtownbikes.org> wrote: > Do you intend to carry replacement parts? Whats your budget? How will it > be transported? I attached a document of our common tool layout when > working on basic bikes. Add a spoke wrench bottom brack tool and > cassette/freewheel tools. > > Mikey > > > On Oct 10, 2017 4:15 PM, "Rick Nonnekes" <rnonnekes(a)gmail.com> wrote: > >> We serve a member and customer base that used mostly low to mid level >> urban and hybrid bikes. >> >> Rick >> Cycle Transitions >> >> On Oct 10, 2017 12:58 PM, "Michael Young" <michael(a)westtownbikes.org> >> wrote: >> >>> What work (type of service) on what bikes do you anticipate? >>> >>> Mikey >>> West Town Bikes >>> >>> >>> On Oct 10, 2017 12:48 PM, "Rick Nonnekes" <rnonnekes(a)gmail.com> wrote: >>> >>> Does any group out there have a mobile workshop? Or have experience >>> and/or suggestions on the size, set-up for a good mobile workshop? We're >>> pursuing the idea of making one and would love to hear from others about >>> their experience with this method of meeting the needs in the community and >>> if there are any ideal models. >>> >>> (I've looked to see if there are past posts on this subject but the >>> search engine doesn't seem to be working right now.) >>> >>> Rick >>> Cycle Transitions >>> Cobourg, ON >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > >

2 1

Re: [TheThinkTank] Thethinktank Digest, Vol 133, Issue 1
by Lawrence Mohammed 15 Oct '17

15 Oct '17

Hi, We've started to offer basic 'health checks' (gear and brake tune ups mainly, plus diagnosing major issues and signposting to servicing/fixes outside the scope of these checks) from a mobile rig Previously carried a Park Tools stand under one arm and had all tools in an army rucksack and cycled to events - not ideal though for my back (and couldn't ask volunteers to do the same really!) I modified a broken trolley I found on the street & made a mini tool rack from leftover trolley tubing, broken broom handle and a bit of aluminium plate Also affixed another plate to the bottom of the Park Tools allen key holder to make a benchmounted holder All the tools fit in the Park Tools box as shown Gloves and lube, folder, first aid kit, rags, etc carried in the army rucksack Trailer easily carries two workstands and tools, could probably carry 3 stands with no problem Added detail of the hitch if useful... Maybe a smaller scale than what you're doing? I wanted to keep things simple, also, we have very limited storage space in a high crime area - this 'trolley trailer' can be bought inside and stands upright, taking up very little room at the back of our workshop This design also allows us to bring our signage stand and cable it on site (making the stand able to used on windy days) -- Warmest regards, *Lawrence Mohammed* Director & Head Mechanic Pro Bike Service C.I.C. *+44 (0)77 222 58587* *probikeservice.co.uk <https://probikeservice.co.uk>* *facebook.com/probikeservice <https://www.facebook.com/professionalbikeservice>* /[Location, NOT delivery address] Pro Bike Service C.I.C. Mobile Garden City Olympic Village London E20 1GW/ On 12/10/17 21:09, thethinktank-request(a)lists.bikecollectives.org wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > > Today's Topics: > > 1. Re: mobile workshop? (Rick Nonnekes) > 2. Re: mobile workshop? (Deb Salls) > 3. Re: mobile workshop? (Rick Nonnekes) > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… / /

2 1

Re: [TheThinkTank] mobile workshop?
by Deb Salls 11 Oct '17

11 Oct '17

Hi All W e have had our BikeMobile, a mobile bike shop on wheels, for a few years. It is a 24 foot step van ( the same size and type as a fedex truck) we received a grant and donations for the truck and build out. We operate on sliding scale basis and do both full price and free services fairly well. We go to parks and community centers all summer long and provide free repair for youth. and then do corporate contracts and events for pay. contact me at deb(a)bikeworks.org if you want more into, pics, specs etc. Here is a picture and description https://bikeworks.org/bike-shop/mobile-bike-shop-find-bikemobile/ Deb On Wed, Oct 11, 2017 at 11:03 AM, Adam Smith <adam(a)boisebicycleproject.org> wrote: > Rick, > > I'm the Youth Educator at the Boise Bicycle Project and we have been > running mobile repair for about a year now. We use a Surly Bill trailer as > our base and are on our second rendition of how we carry supplies. As far > as locations served we focus on community centers, after school programs, > and apartment complexes in high need areas. Currently we have a custom > built box for the trailer that fits the footprint exactly. Inside the > custom box we fit cables, housing, brake pads, ferrules, chains, grease, > chain lube, took kits, tubes, patch kids and stands (I probably missed some > things too). We focus on kids bike repairs so most of our repairs are flats > and brake issues. We emphasize that we are able to do basic repairs and are > not a fully stocked shop, so in some cases folks are referred to our brick > and mortar. > > To pull the trailer, which weighs a ridiculous amount so I'm not going to > speculate, we have a surly Ogre with an electric assist. Before we had the > custom built box I was hauling it around without an assist using my old > Fisher commuter bike. The box helps to protect from the elements as we > sometimes travel in rainy, wet conditions but it does add a lot of weight. > I'll attach some pictures of our current set up and of our old if I can > find pictures from then. Hope this is a start to what you're looking for. > > > 20160621_174955.jpg > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B4x04TgoXU1nQ0dU…> > > 20170524_162924.jpg > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B4x04TgoXU1nQ0FO…> > > 2017_Whittier_Fix_It_1.JPG > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B10Ns0_hZp72cFFp…> > > > > On Tue, Oct 10, 2017 at 11:48 AM, Rick Nonnekes <rnonnekes(a)gmail.com> > wrote: > >> Does any group out there have a mobile workshop? Or have experience >> and/or suggestions on the size, set-up for a good mobile workshop? We're >> pursuing the idea of making one and would love to hear from others about >> their experience with this method of meeting the needs in the community and >> if there are any ideal models. >> >> (I've looked to see if there are past posts on this subject but the >> search engine doesn't seem to be working right now.) >> >> Rick >> Cycle Transitions >> Cobourg, ON >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > -- > Ride on right on, > > Adam P. Smith > Youth Education Specialist > Boise Bicycle Project > > 1027 S. Lusk Street > Boise, ID 83706 > 208.429.6520 <(208)%20429-6520> > www.boisebicycleproject.org > > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > -- Deb Salls Executive Director 206-695-2607 bikeworks.org Bike Works promotes the bicycle as a vehicle for change to empower youth and build resilient communities.

1 0

Re: [TheThinkTank] mobile workshop?
by Rick Nonnekes 11 Oct '17

11 Oct '17

Thanks Adam. Yes, this is helpful, and I really like the fact that you're using an electric assist bike to pull the trailer! Rick On Wed, Oct 11, 2017 at 2:03 PM, Adam Smith <adam(a)boisebicycleproject.org> wrote: > Rick, > > I'm the Youth Educator at the Boise Bicycle Project and we have been > running mobile repair for about a year now. We use a Surly Bill trailer as > our base and are on our second rendition of how we carry supplies. As far > as locations served we focus on community centers, after school programs, > and apartment complexes in high need areas. Currently we have a custom > built box for the trailer that fits the footprint exactly. Inside the > custom box we fit cables, housing, brake pads, ferrules, chains, grease, > chain lube, took kits, tubes, patch kids and stands (I probably missed some > things too). We focus on kids bike repairs so most of our repairs are flats > and brake issues. We emphasize that we are able to do basic repairs and are > not a fully stocked shop, so in some cases folks are referred to our brick > and mortar. > > To pull the trailer, which weighs a ridiculous amount so I'm not going to > speculate, we have a surly Ogre with an electric assist. Before we had the > custom built box I was hauling it around without an assist using my old > Fisher commuter bike. The box helps to protect from the elements as we > sometimes travel in rainy, wet conditions but it does add a lot of weight. > I'll attach some pictures of our current set up and of our old if I can > find pictures from then. Hope this is a start to what you're looking for. > > > 20160621_174955.jpg > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B4x04TgoXU1nQ0dU…> > > 20170524_162924.jpg > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B4x04TgoXU1nQ0FO…> > > 2017_Whittier_Fix_It_1.JPG > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B10Ns0_hZp72cFFp…> > > > > On Tue, Oct 10, 2017 at 11:48 AM, Rick Nonnekes <rnonnekes(a)gmail.com> > wrote: > >> Does any group out there have a mobile workshop? Or have experience >> and/or suggestions on the size, set-up for a good mobile workshop? We're >> pursuing the idea of making one and would love to hear from others about >> their experience with this method of meeting the needs in the community and >> if there are any ideal models. >> >> (I've looked to see if there are past posts on this subject but the >> search engine doesn't seem to be working right now.) >> >> Rick >> Cycle Transitions >> Cobourg, ON >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > -- > Ride on right on, > > Adam P. Smith > Youth Education Specialist > Boise Bicycle Project > > 1027 S. Lusk Street > Boise, ID 83706 > 208.429.6520 <(208)%20429-6520> > www.boisebicycleproject.org > > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > >

1 0

Neighborhood Bike Works is hiring a Lead Mechanic in our Community Bike Shop
by Steve Maluk 26 Sep '17

26 Sep '17

Neighborhood Bike Works (in Philadelphia) is hiring for a Lead Mechanic position in our earned-revenue Community Bike Shop. Please help us spread the word. The job description is below, and also attached as a pdf... *Bike Shop Lead Mechanic – Neighborhood Bike Works* *Neighborhood Bike Works (NBW) *inspires youth and strengthens Philadelphia communities by providing equitable access to bicycling and bike repair through education, recreation, leadership, and career building opportunities. NBW offers after-school and summer programming to youth, runs adult bike repair programming, and operates a community bike shop as a source of earned revenue for our non-profit organization. *Position Summary: *Neighborhood Bike Works is seeking a part-time *Bike Shop Lead Mechanic* in our Community Bike Shop. This position is responsible for repairing and refurbishing used bicycles for sale in our earned-revenue bike shop, and assists members of the public in finding bikes, bike parts, and accessories sold in our shop. Additionally, this position will greet members of our community from various stakeholder groups, including youth, parents, volunteers, donors, and adult program participants. The Lead Mechanic works alongside volunteers to assist the public during NBW’s Bike Church hours. This position is expected to model NBW’s values of access, equity, and in creating and maintaining a safe space at NBW. *Reports to: *Shop Manager *Start Date & Work Schedule: * The preferred start date for this position is November 6, 2017. This part-time position will work 30 hours-per-week during our shop’s peak season (April 1 to September 30) and 20 hours-per-week during the off-season (October 1 to March 31). The position will include some evening and weekend work, and is based at our Community Bike Shop and headquarters at 3939 Lancaster Avenue in West Philadelphia. *Primary Responsibilities* · Repair and refurbish bicycles to a saleable quality, assess value of bicycles, and sell bicycles during our Community Shop time. · Deliver helpful customer service to a diverse base of customers and volunteers during Bike Church and the Community Bike Shop. · Assist patrons with bike repairs during Bike Church hours, ensuring the focus remains on learning and empowerment for Bike Church patrons. · Support daily shop operations including daily setup and closing of workshop areas and sales floor, organizing product for sale, answering phone, cleaning, and light facilities projects. · Support Donations Coordinator in keeping inventory organized and sorting bike donations. *Qualifications:* The ideal candidate will have 2+ years of experience as a bike mechanic, a year or more of work experience in a bike shop or another customer-focused retail environment, will exhibit excellent communication and customer service skills, and be skilled in the use of a wide range of bicycle tools and the repair of bicycles built from the 1970’s and later. Candidates with non-traditional work and education experience are encouraged – please tell us about those experiences that qualify you for this position. Additional Qualifications: · Driven by the mission and work of NBW. · Commitment to social justice and youth leadership. · Willingness to work as a team player with other staff, volunteers, and youth. · Reliable, self-motivated, and with a keen attention to detail. · Sense of humor, patience, and flexibility. NBW is a collaborative and fast-paced work environment. · Ability to lift up to 50 pounds. · License to drive a motor vehicle in Pennsylvania, preferred. · Successful passing of PA State Police Criminal Background Check, Pennsylvania Child Abuse History Clearance, and FBI Clearance required. *Compensation:* This is a part-time, non-exempt, hourly position. The starting pay range for this position will be $12.50 to $14.75 per hour, depending on experience and qualifications. NBW offers a competitive benefits package, including health, dental, and retirement plans. Additionally, NBW offers the equivalent of two weeks of paid vacation (50 hours) for the employee in the first year of this position, as well as personal paid time off, and an employee purchase benefit on bicycles, parts, and accessories. *To apply for this position, please email a resume and cover letter* to jobs(a)neighborhoodbikeworks.org, with “Lead Mechanic Position” as the subject heading of your email. Applications received by October 11, 2017 will receive priority consideration. We are an Equal Opportunity Employer and actively seek staff who reflect the community we serve. Candidates of color are encouraged to apply. --- Steve Maluk He/Him/His Executive Director *Neighborhood Bike Works <http://neighborhoodbikeworks.org>* <215-386-0316%20x%20113>215-386-0316 x118 *Join NBW at** Youth Bike Summit* *2017* *----------------------------------------------* October 6-8, 2017 Arlington, VA + Washington, DC [image: ybs-2017-postcard-orange-reduced] <http://youthbikesummit.org>

1 0

Used Bikes Available - Panhandle of Florida
by Kyle Wagenschutz 26 Sep '17

26 Sep '17

Hey folks, Recently, I received a request from a bike rental operator located in the panhandle of Florida looking for a new home each year for their used bicycle fleet. It was described to me that about 700 bikes are available for free on an annual basis - the owner only wants the bikes to be picked up from their location. As described to me, the bikes are in working condition and have about one season of rental wear and tear on them. Currently, the owner is taking the bikes to the scrapyard as they are replaced. If anyone has any interest, please feel free to send me a note and I’ll connect you directly with the owner of the bike tour company. Best, Kyle Wagenschutz Director of Local Innovation PeopleForBikes P.O. Box 2359 / Boulder, CO 80306 EMAIL: kyle(a)peopleforbikes.org <mailto:kyle@peopleforbikes.org> MOBILE: 303.886.8288 PeopleForBikes.org <http://peopleforbikes.org/>BigJumpProject.org <http://www.bigjumpproject.org/>

8 8

Burning Man Bikes
by Jonathan Rosenbaum 20 Sep '17

20 Sep '17

Heads up, according to a friend of mine who just came back from Burning Man in Nevada, many, many bikes were left abandoned after the event. According to the event's webpage [1]: Love 'Em… and Please Don't Leave 'Em Leave no trace. A bike is a BIG trace. Somehow it's become a common myth (playa legend, perhaps?) that it's perfectly acceptable to leave your bike behind upon striking your camp. Nothing could be further from the truth. If you pack it in, pack it out! However, apparently, it is perfectly acceptable to leave bikes behind, so there may still be lot's of bikes for bike projects in the region of Black Rock, Nevada to gather up. Something definitely to look into if it hasn't already been. -Jonathan Links: ------ [1] https://burningman.org/event/preparation/getting-around/bikes/

4 4

Choosing Leaders
by Josh Bisker 20 Sep '17

20 Sep '17

Hello compadres! So, we're trying to go from a create squads to handle different arenas of planning and activity -- like Shop Management, Communications, Programming, Volunteer Coordination, Partnerships, etc. Each squad will have a captain. *Here's the request for help: *We're looking for your insight and experience to help us figure out how to pick our captains, especially this first time. - How have you dealt with electing / selecting leaders? - What lessons have you learned about good ways to do this? - How about bad ways to do this? What should we be careful of? - How can we best inoculate ourselves against interpersonal conflicts muddying the process? - Are there anonymous voting systems, consensus systems, or other systems you recommend for this kind of thing? (FYI, our group is nascent enough that we don't yet have a strong consensus model in place for making big decisions.) For reference about captains in specific: - Captains are the squad’s points-of-contact, coordinators for its activities, and default squad spokespeople. They’re responsible for the squad’s workflow, and for communicating with the collective about the squad’s initiatives, progress, and needs -- also for structuring how volunteers can participate in the squad’s activities. - Captains’ stated mission also includes supporting and engaging with ideas from their squad members and from the larger collective too -- and calling for extra teamwork when the squad needs it. More about the squads model from me soon, but in the mean time some feedback here would be grrrrrreat! Kisses, Josh Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

6 5