- TheThinkTank - lists.bikecollectives.org

so you want to throw a benefit...
by Cuper 15 Nov '07

15 Nov '07

A growing number of people are offering to do benefits for us. And by "offering to do," I mean a person approaches us with an idea, does all the work and most of the promotion, and turns over share of the glory at the end. I really want to encourage this trend. Every once and a while, we run into a conflict of interest, and have to say "no, thank you." (Alleycats may be fun, but many of our friends object to seeing "Run red lights!" and "Support Neighborhood Bike Works!" on the same flier.) I don't much like turning people down, and want written guidelines I can share with would-be organizers. Sometimes it seems like the goal is to use our name to help promote an event, rather than to have an event which helps us. This is okay, up to a point. It's not a benefit for us, though, if it doesn't raise money /for us/. I'd like to request a minimum donation -- either percent of proceeds, or flat amount of cash -- in order for an organizer to use our name, logo, or otherwise suggest it's a benefit for us. That said, I have no idea what would be appropriate. Ten percent? Fifty percent? A hundred dollars? Does anyone have policies or feedback about these sorts of things? Can you share 'em? jimmie -- -- Neighborhood Bike Works tel: 215.386.0316 3916 Locust Walk fax: 215.386.7288 Philadelphia, PA 19104 www.neighborhoodbikeworks.org Providing opportunities to youth through bicycling. NBw has a listserv! To stay in touch, subscribe to nbw(a)list.purple.com via www.purple.com/list.html.

2 1

Re: [TheThinkTank] Parking racks from frames
by Bob Giordano 15 Nov '07

15 Nov '07

we are making bicycle parking racks from frames. very easy and effective. strip down frame, insert stem into seat tube, turn upside down and slide stem onto a 1" piece of round tubing. space them at about 30". a 90" piece of round steel tubing works great: this allows an inverted bike frame on each end, with a frame at 30" and one at 60". this allows 8 bikes to be parked easily. the round tubing should be about 10" off the ground: this is accomplished either with a bmx frame on each end attached via stem in seat tube, or even simpler- bmx handlebars and a stem (similar to the bike stand set up that free ride pittsburgh has a picture of on their web). i'll let the list know when we have a picture. we have 6 of these racks, and we loan them out and/or take them to events (by bike trailer because they are so light). i'd imagine we could have them 'for hire.' we a couple of these in front of our shop too. these racks are a use for frames that have been hit by a car, or low-end bikes. you could also leave some parts on the bike, like the bottom bracket- that way, as energy gets more expensive, the parking racks could possibly serve as a part depo. community gardens are a good outlet for these racks too. if security is an issue, a quick weld or grind can make them more secure. -- Bob Giordano Free Cycles Missoula Shop: 732 S. 1st St. West, 541.7284 3PM-7PM Mon,Tues,Thurs & 11AM-3PM Sat Missoula Institute for Sustainable Transportation www.strans.org, mist(a)strans.org, 406-880-6834

1 0

How To Make A Bike Blender
by Joseph 15 Nov '07

15 Nov '07

Hi all, I was wondering if anyone has plans on how to make a bike blender. I am having hard time finding this stuff on the internet and figured someone must have a simple design. I plan on building it with youth from our programs over the course of a day and hopefully get to share a milkshake at the end of it all. Any resources you have or could point me to would be greatly appreciated. Thanks -Joe Joseph Parietti Program Coordinator Bike Works 3709 S. Ferdinand St, Seattle, WA 98118 (206) 725-9408, ext. 2 www.bikeworks.org

3 2

shop bike racks, locking tools
by Urban Bike Project of Wilmington, Inc. 14 Nov '07

14 Nov '07

Hi All, UBP just moved into our new space! Currently all the bikes are leaning against each other (pedals off, handlebars turned) with no easy way to get ones in the middle out. We have a fairly open floor space and I was wondering if anyone has suggestions for building racks that would hold bikes more upright and separate from each other. The channel systems used by bike shops would be great, but of course we'd rather build something with existing resources and without spending a lot of cash. We don't have much room for hanging bikes, but will be putting up some kind of cable system like Free Ride has for wheels. Another quick question. We are in a shared space situation and are trying to figure out what tools to secure and how. We have been thinking about putting latches on an old fridge and using that to keep valuables. In your experience what type of stuff would walk out of your shop if it wasn't bolted down or locked up? Looking for any and all ideas... Thanks! Brian -- Visit us online at http://urbanbikeproject.org

4 3

sopo wins grant from fund for southern communities
by rachael spiewak 14 Nov '07

14 Nov '07

hi, friends. just wanted to share the fabulous news that we scored a grant from the fund for southern communities <http://www.fundforsouth.org>. we appear to be in good company <http://fundforsouth.org/new/grants/grants2007_2008.htm>. i'm going to upload our application to the wiki later so folks can make use of it. hooray for community bike shops! -rachael

1 0

design specs for steel cable wheel rack?
by Durham Bike Co-op 09 Nov '07

09 Nov '07

Hey Free Ride + anyone else who has done something like this: we're also thinking about installing a cable (+ hooks + spacers) kinda thing for wheel storage, as on the "shop organization" part of the wiki. So: I was wondering if there were any suggestions out there about what type of wire is appropriate; what hardware (ends, anchors, assemblies etc.) to use and how to use them. We'll be going into either brick or wood joists to anchor it, depending on how we lay it out. Thanks. peace, Colin. -- Durham Bike Co-op 723 N. Mangum St. Durham, NC 27701 www.durhambikecoop.org

2 2

BICAS Hiring Community Mechanic / Collective Member
by Ellie Kaszniak 08 Nov '07

08 Nov '07

BICAS, a collectively run non-profit BICYCLE recycling and education center is seeking a part time Staff Collective Member, $7.85/hr. Job Description: assist customers, help with classes, build bikes, coordinate volunteers, etc. Personable and comfortable greeting customers, strong mechanical skills encouraged, bilingual a plus, interest or experience in teaching classes or grant writing/organizational work a plus. Diversity of age, gender, ethnicity encouraged. Accepting applications until November 23rd. Contact bicasunderground(a)yahoo.com or 44 W. 6th St (drop in or mail) for resumes, #628-7950 or e-mail for questions. www.bicas.org. TUCSON, ARIZONA P.S. I tried posting this directly on the bike collectives website but was not able to submit the form... same thing happened a few months ago and someone helped us get it on there. If anyone is able to do that again, it would be hugely appreciated, or just pass this on to anyone that might have interest. Thanks _________________________________________________________________ Boo! Scare away worms, viruses and so much more! Try Windows Live OneCare! http://onecare.live.com/standard/en-us/purchase/trial.aspx?s_cid=wl_hotmail…

1 0

Bike Intake Sheet
by Austin Amos 06 Nov '07

06 Nov '07

I have my first bike donation pickups scheduled for this weekend. I posted an ad in a local weekly trader paper for junk bike pickup service. I plan to repair / service the bikes and off them to the community to test the waters on the bike collective concept. Other members have advised me to get a signature / driver's licence number from the person making the donation of the bike(s). Does anyone have a template form available in Word .doc or .PDF format that I can use as a Bike Intake Sheet. I would almost like something with some legal verbage on it. I plan to provide a copy to my city police for them to research the serial numbers for theft. Additionally I feel that once I achieve 503 C non-profit status I can contact the past groups of donors about their donation values. I also appreciate any additional tips you can provide. Thanks again, Austin Amos

1 0

Re: [TheThinkTank] Craigslist Postings - tires (The Bike Cave - San Marcos, Texas)
by Taylor 31 Oct '07

31 Oct '07

>> recycled as metal scrap (and now that our local MEC store takes our >> dead tires for recycling our garbage now is mainly old seats and >> other plastic bits). >> > > that's a question for you guys... what do you do with your old dry rotted tires? We can't find anyone that will take them in baltimore. I found one place that would charge a dollar a pound to recycle them, obviously not an option for us....... Any ideas about who to talk to and what to do with them if not? The only reuse idea I've had is to make potts out of them which would be time consuming, and only use afew...... Beth Velocipede Bike Project Baltimore, MD RE"CYCLING" , etc. Hello Beth and others, Our ethos at our shop is to recycle EVERYTHING! So besides the usuals, glass, cans, paper and cardboard we make an effort to separate and recycle aluminum (unusable walmart frames) and steel (most bolts, etc.) and patch all our tubes (gives mundane but fun work for those volunteers who dont know much about fixing bikes but want to help the shop, we also have the occasional "tubular tuesday" were we all sit down with a beer and patch tubes like crazy) and give them away for free. I also started to make wind chimes out of used, unusable chainrings, short cables, stems and bent handlebars (aluminum = better sound). They aren't the best sounding windchimes, but they are damn cool and use 100% recycled parts. Try it out and send me a picture if it works! Tires: An idea I had to use the extra tires we discard is to keep them, shred them (something like a wood chipper) then make them into floor mats. I would like to think a good glaze glue would do the trick, but I HAVE NOT tried this out yet (we are super busy, just like every other community bike shop). Its not much help, but its an idea! I will test this theory out and try it soon, if someone beats me to it, let me know! Taylor taylorpow(a)gmail.com www.thebikecave.org

1 0

do you have an internship program? details please!
by rachael spiewak 31 Oct '07

31 Oct '07

Hi, friends. Sopo just got its first intern, an 11th grader with an anti-authoritarian outlook who's ready to learn how to alter power structures (his words, I swear!). We're all kinds of thrilled about creating a radical internship program for him, and we want him to get the most out of the experience. I'm working on the structure end of things. His school didn't supply us with any parameters (the idea is to spend time at some nonprofit of your choice and write a few review papers). I'm wondering: - if you offer internships at your shop, what kind of structure do you use? - if you have experience with radical internships, can you share a little bit about that with us? Thanks! rachael

2 1