- TheThinkTank - lists.bikecollectives.org

Tool Board Fashion Show: Strut Your (Tool Board's) Stuff!
by Josh Bisker 17 Jan '18

17 Jan '18

Hey! We're going to redesign our tool boards soon, and want to look at yours for inspiration. Show 'em off! The winner of the most fly tool board gets a group serenade at B!B! (Specifically, we're going to pare down the number of tools on each board to the basics+, but show us everything ya got!) Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

4 3

Tool Board Fashion Show
by Bob Giordano 16 Jan '18

16 Jan '18

Free Cycles Missoula approach, for now: -the 12 open and free public stands each have the following: 7,8,9,10,13,14,15mm wrenches; screw drivers and plyers (we used to have 7-17mm, yet 11,12,16 not used much) -we have a central board with many more tools that are shared, like BB, Headset, cone wrenches, etc. (we keep an eye out for improper use and an ear out for the hammer). we only have 13, 15, 17 cone wrenches here. (plus 17mm box wrenches) -we have a more secluded board with specialty tools, and folks need to ask us -we have lube, grease, cleaner, rags, allen wrenches all in the middle of the shop. we half jokingly refer to this spot as the watering hole. everyone needs to come to this spot and bump into one another and say hello. -one bigger board/public station has 7-17mm, plus english wrenches. this board is more for kid bikes and cruisers, which tend to need more wrenches. (a few other boards have 1/2" wrench with a note for use.) -- Bob Giordano Free Cycles Missoula 10AM-6PM Tues-Sat, www.freecycles.org Missoula Institute for Sustainable Transportation www.strans.org, mist(a)strans.org, 406.830.7676 --- Josh Bisker wrote: Hey! We're going to redesign our tool boards soon, and want to look at yours for inspiration. Show 'em off! The winner of the most fly tool board gets a group serenade at B!B! (Specifically, we're going to pare down the number of tools on each board to the basics+, but show us everything ya got!) Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

2 1

Re: [TheThinkTank] Thethinktank Digest, Vol 136, Issue 11
by Tegan Moss [B!KE] 16 Jan '18

16 Jan '18

We built new benches when we moved two years ago. We shadow board all tools and colour code them to the bench. Makes putting things away easy for people new to the shop. All five benches have the same tools and layout. Holes in the side of the bench for penetrant, degreaser, etc. Screw drivers are also in the bench which people have a hard time finding. Pretty pretty with how these work for us! On Jan 15, 2018 4:06 PM, <thethinktank-request(a)lists.bikecollectives.org> wrote: Send Thethinktank mailing list submissions to thethinktank(a)lists.bikecollectives.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.bikecollectives.org/listinfo.cgi/thethinktank- bikecollectives.org or, via email, send a message with subject or body 'help' to thethinktank-request(a)lists.bikecollectives.org You can reach the person managing the list at thethinktank-owner(a)lists.bikecollectives.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..." Today's Topics: 1. Re: job posting (Jane Halliday) 2. Tool Board Fashion Show: Strut Your (Tool Board's) Stuff! (Josh Bisker) ---------- Forwarded message ---------- From: Jane Halliday <jghalliday(a)aol.com> To: cyclista(a)inventati.org, thethinktank(a)lists.bikecollectives.org Cc: Bcc: Date: Mon, 15 Jan 2018 14:16:27 -0500 Subject: Re: [TheThinkTank] job posting Thanks Nicholas! Sent from AOL Mobile Mail ------------------------------ On Saturday, January 13, 2018 cyclista <cyclista(a)inventati.org> wrote: Jane, You did it as it usually is done. You post the job description and the means of submission. Essentially you're inviting anyone on the list to apply, or anticipating that they will put the word out to qualified people they know who might not be on the list. -cyclista Nicholas On 2018-01-09 19:36, Jane Halliday wrote: > Hi ThinkTank, > > > I'm with Falls City Community BikeWorks in Louisville KY. We have > opened a search for an Executive Director and I'd like to get the word > out to the wiki bike community. Not exactly sure how to go about this > - do you all distribute the info or am I supposed to do something > particular to make that happe? I'm pasting the job description below. > Please let me know if I need to do anything and THANK YOU.. > > > Jane Halliday > > > > > > > > > > > > Executive Director > Falls City Community BikeWorks Seeks Innovative Executive Director > Part-time position available for exceptional candidate to help lead > Louisville’s non-profit bike co-operative with a vision for the future > and collaboration with dedicated and tenured volunteers. > Reporting to the Board of Directors, the Executive Director (ED) will > have overall strategic and operational responsibility for Falls City > Community BikeWorks programs, fundraising activities, expansion and > execution of its mission. The ideal candidate will initially develop > deep knowledge of core programs and operations before creating a > strategic plan to carry us into the future. > > Roles & Responsibilities > Leadership & Management: > > Ensure ongoing program excellence, program evaluation, and consistent > quality of finance and administration, fundraising, communications, > and systems > > Recommend timelines and resources needed to achieve the strategic > goals approved by the board. > > Develop, maintain, and support a strong Board of Directors; seek and > build board involvement with strategic direction > > Recruit, develop, and retain FCCB volunteers. > > Ensure effective systems to track progress, and regularly evaluate > program components, to measure successes that can be effectively > communicated to the board, funders, and other constituents. > > Fundraising & Communications: > > Expand local revenue-generating and fundraising activities to support > existing program operations. > > Improve all aspects of communications—from web and social media > presence to external relations -- with the goal of creating a stronger > brand. > > Use external presence and relationships within Louisville to gain new > opportunities. > > Planning & New Business: > > Design an aggressive comprehensive fundraising plan, including annual > campaign. > > Develop strategic plan with Board of Directors input, executable over > the next 2 years. > > Build and expand partnerships with corporations, political and > community leaders. Deepen relationships with funders to create > sustainable funding resources. > > > > Qualifications > The ED will be thoroughly committed to FCCB mission. All candidates > should have leadership and relationship management experience. > Specific requirements include: > > Bachelor degree, ideally in leadership, management or communications > or at least 2 years of fundraising experience; ability to point to > specific examples of having developed and operationalized strategies > > Unwavering commitment to quality programs and data-driven program > evaluation > > Proficiency in organizational management with the ability to coach and > manage staff and volunteers, set and achieve strategic objectives, and > manage a budget > > Experience working with volunteers and/or a Board of Directors with > the ability to cultivate existing board member relationships > > Strong marketing, public relations, and fundraising experience with > the ability to engage a wide range of stakeholders and cultures > > Strong written and verbal communication skills; a persuasive and > passionate communicator with excellent interpersonal and > multidisciplinary project skills > > Action-oriented, entrepreneurial, adaptable, and innovative approach > to business planning > > Ability to work effectively in collaboration with diverse groups of > people > > Passion, idealism, integrity, positive attitude, mission-driven, and > self-directed > > Dedicate 20-25 hours per week to the mission > > Other duties as needed > > > > Salary range: $20,000 > Applicants: Please submit a letter of application, a resume, and > three professional references in PDF format to fccbikeworks(a)gmail.com. > > > > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: > http://lists.bikecollectives.org/options.cgi/thethinktank- bikecollectives.org ---------- Forwarded message ---------- From: Josh Bisker <jbisker(a)gmail.com> To: The Think Tank <thethinktank(a)lists.bikecollectives.org> Cc: Bcc: Date: Mon, 15 Jan 2018 15:44:05 -0500 Subject: [TheThinkTank] Tool Board Fashion Show: Strut Your (Tool Board's) Stuff! Hey! We're going to redesign our tool boards soon, and want to look at yours for inspiration. Show 'em off! The winner of the most fly tool board gets a group serenade at B!B! (Specifically, we're going to pare down the number of tools on each board to the basics+, but show us everything ya got!) Josh Bisker 914-500-9890 <(914)%20500-9890> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/> _______________________________________________ Thethinktank mailing list Thethinktank(a)lists.bikecollectives.org http://lists.bikecollectives.org/listinfo.cgi/thethinktank- bikecollectives.org

1 0

job posting
by Jane Halliday 15 Jan '18

15 Jan '18

Hi ThinkTank, I'm with Falls City Community BikeWorks in Louisville KY. We have opened a search for an Executive Director and I'd like to get the word out to the wiki bike community. Not exactly sure how to go about this - do you all distribute the info or am I supposed to do something particular to make that happe? I'm pasting the job description below. Please let me know if I need to do anything and THANK YOU.. Jane Halliday Executive Director Falls City Community BikeWorks Seeks Innovative Executive Director Part-time position available for exceptional candidate to help lead Louisville’s non-profit bike co-operative with a vision for the future and collaboration with dedicated and tenured volunteers. Reporting to the Board of Directors, the Executive Director (ED) will have overall strategic and operational responsibility for Falls City Community BikeWorks programs, fundraising activities, expansion and execution of its mission. The ideal candidate will initially develop deep knowledge of core programs and operations before creating a strategic plan to carry us into the future. Roles & Responsibilities Leadership & Management: Ensure ongoing program excellence, program evaluation, and consistent quality of finance and administration, fundraising, communications, and systems Recommend timelines and resources needed to achieve the strategic goals approved by the board. Develop, maintain, and support a strong Board of Directors; seek and build board involvement with strategic direction Recruit, develop, and retain FCCB volunteers. Ensure effective systems to track progress, and regularly evaluate program components, to measure successes that can be effectively communicated to the board, funders, and other constituents. Fundraising & Communications: Expand local revenue-generating and fundraising activities to support existing program operations. Improve all aspects of communications—from web and social media presence to external relations -- with the goal of creating a stronger brand. Use external presence and relationships within Louisville to gain new opportunities. Planning & New Business: Design an aggressive comprehensive fundraising plan, including annual campaign. Develop strategic plan with Board of Directors input, executable over the next 2 years. Build and expand partnerships with corporations, political and community leaders. Deepen relationships with funders to create sustainable funding resources. Qualifications The ED will be thoroughly committed to FCCB mission. All candidates should have leadership and relationship management experience. Specific requirements include: Bachelor degree, ideally in leadership, management or communications or at least 2 years of fundraising experience; ability to point to specific examples of having developed and operationalized strategies Unwavering commitment to quality programs and data-driven program evaluation Proficiency in organizational management with the ability to coach and manage staff and volunteers, set and achieve strategic objectives, and manage a budget Experience working with volunteers and/or a Board of Directors with the ability to cultivate existing board member relationships Strong marketing, public relations, and fundraising experience with the ability to engage a wide range of stakeholders and cultures Strong written and verbal communication skills; a persuasive and passionate communicator with excellent interpersonal and multidisciplinary project skills Action-oriented, entrepreneurial, adaptable, and innovative approach to business planning Ability to work effectively in collaboration with diverse groups of people Passion, idealism, integrity, positive attitude, mission-driven, and self-directed Dedicate 20-25 hours per week to the mission Other duties as needed Salary range: $20,000 Applicants: Please submit a letter of application, a resume, and three professional references in PDF format to fccbikeworks(a)gmail.com.

2 2

electronic volunteer sign up
by Jesse Cooper 14 Jan '18

14 Jan '18

Hey folks! Our Community Bikes in Vancouver, Canada, is looking for a way for volunteers to electronically sign up. We have some limit to how many volunteers can access the space at the same time each day, we tend to spread the labour around a bit, and we currently have used a few online services that can link to our website, but doesn't link with our current staffing calendar and event calendar. For that we are simply using a google calendar. But I'm wondering if anyone has had success with some type of really easy to use interface, that generates reports for metrics 'n stuff, and that is very user simple. hmm? Jesse

3 6

Fwd: Re: Patron Bill of Rights (consider adopting)
by cyclista＠inventati.org 13 Jan '18

13 Jan '18

> _< forgot to cc the list again -cyclista Nicholas -------- Original Message -------- Subject: Re: [TheThinkTank] Patron Bill of Rights (consider adopting) Date: 2018-01-10 15:14 From: cyclista(a)inventati.org To: Angel York <aniola(a)gmail.com> Everything else in it looks like a good idea. Just those two parts are off base. Our policy is that we have no right to control bikes brought in by participants, and that should be morally obvious. Where we do have rights is with the bikes and parts we hold, and the extreme importance of _not_dying_in_traffic_ incentivizes rules and restrictions about the condition of bikes rolling out into the street. We all probably remember some lofty gilded time in some anarchic community shop in a garage or low rent strip mall where the craziest bikes were built and of the street rogues that inhabited the place flew out the door on those mobile experiments without a care. But now I'm in a place where people's children come to my shop with the intention of riding out the door and into the street, and over a decade of experience has shown me that kids (and a lot of adults) too much of the time just don't care about functional brakes, or even understand how brakes should feel, even when the culture at the shop is pervaded by common sense, patient instruction, and good examples. Drawing hard lines about bikes we legally own and have full rights to exercise control over makes unassailable sense considering that lives are at stake. Similarly, while some shops may have donors willing to dole out tools limitlessly, more do not. I don't hold that our shops are effective without tools, or that participants own the expensive tools that others fought hard to gain. There has to be an understanding on the part of the participants that they have a responsibility not to damage the entity that shelters, educates, and empowers them. Not everyone just naturally takes care of free things. Most participants don't intuit that the specialized free remover wrench cost $30 or that the Tire seating tool is rare and costs over $50. It isn't anyone's right to abuse or mishandle the shop's tools. I think these things are all self apparent. The spirit of these two lines seems more about not being dominated by pushy condescenders, mansplainers, or the like, and about guaranteeing the promise of power and freedom. By asserting the participant is the owner. At our shop we assert that very thing emphatically. We just don't do it before the participant has a safe bike in their possession and before they know the difference between a suicide lever and a disc brake, or to put a finer point on it, between aluminum rims whose walls are about to cave in and ones that have years of life left in them. Anyway, the lines both could probably be replaced by a single one referencing something reaffirming the purpose of the end goal, that being the participants ultimate (rather than immediate) empowerment. I'm a bit too tired atm to come up with some good wording for it. But attached is our participant policy. That having a "policy" rather than "bill of rights" focuses on the authority of the shop more than the autonomy of the participants is not a detail that is lost one me, but I still think you might find our premises useful. Sorry this whole thing is so tl;dr. -Cyclista Nicholas On 2018-01-06 13:37, Angel York wrote: > I would love to hear your suggested adaptations, because I think > something > along the goals of this Patron Bill of Rights is HUGELY important and a > worthy topic of discussion for any community bike shop that purports to > teach its patrons. > > On Sat, Dec 23, 2017 at 11:24 PM, <cyclista(a)inventati.org> wrote: > >> What about the first two? I would say they need greater detail. >> >> At our shop we don't let bikes being built at the shop leave without >> passing a safety check, which might conflict with the first one. And >> without finer-grained detail on the second one, shop tools could get >> broken >> when participants use the wrong tool for a job, or use the correct >> tool but >> in the wrong way. >> >> -Cyclista Nicholas >> >> >> On 2017-12-16 18:34, Angel York wrote: >> >>> This is a fantastic sign that illustrates excellent teaching >>> practices, >>> and >>> many shops that don't have something similar would do well, in my >>> opinion, >>> to include something similar. >>> >>> As a patron of SPOKELAND, you have the right to the following >>> >>> - To pursue your own goals for your own bike >>> - To be in control of the tools used on your bike >>> - To always be asked before someone touches your bike >>> - To ask & receive assistance from shop staff >>> - To work on your bike in a SAFER SPACE [there is also a standard >>> safer >>> space agreement] >>> - To be supported in your learning >>> - To learn with staff >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: >>> http://lists.bikecollectives.org/options.cgi/thethinktank-bi >>> kecollectives.org >>> >>

1 0

Liability Waivers
by John Kovalchik 11 Jan '18

11 Jan '18

Looking for some examples of liability waivers for repairs and/or totally gifted bikes. I work with a group of folks that flip bikes and do repairs for individuals in need. Unfortunately we are only able to operate at our space for a few hours at a time and usually cannot store or take bikes over night. Due to the severe disrepair of some of the bikes we come across and our limited time with them often we are not able to get them in the complete repair that we would hope. Any co ops or collectives out there use these? What should or should not be included? Thanks

8 7

Educational videos
by Tigre Bici 08 Jan '18

08 Jan '18

Hello! We wish you all have and excellent 2018. We are wondering if any of you use videos to explain bike mechanics on your shops/collectives, if so: Do you have a especial format on them? Are you planning on making some? Do you think it will work on the shop? Maybe on other language besides english? We are working on creating some videos to help on learning the tools/skills and will like to know if the vids wlll be helpful for you. So, hit us up if you are interested Regards R.

2 1

bulk service/repair contracts
by Geoff Heath 05 Jan '18

05 Jan '18

Hey folks! I'm looking at drawing up an annual tune-up/repair contract with a school division for their 80 bike fleet and I've never written up anything like this previously. I couldn't find any examples of bulk repair contracts on thinktank and am wondering if anyone has an example document I can riff off of, or experience around this. I imagine it's not the sort of thing that I'd want to miss anything important and end up in the hole on. Would greatly appreciate any advice that anyone could give. Thanks! Geoff Heath, Education Director The Winnipeg Repair Education N' Cycling Hub 1057 Logan Ave. Winnipeg, MB R3E 3N8 Treaty 1 Territory, Homeland of the Metis Nation http://www.thewrench.ca 204-296-3389

1 0

Boise Bicycle Project, Hiring Shop Operations Manager and Prison Program Coordinator.
by Jimmy Hallyburton 04 Jan '18

04 Jan '18

We've got two very exciting and impactful positions to fill at the Boise Bicycle Project and hope a few of you out there might be interested. Check out the job posting and videos below for more info about the positions. I hope to be talking to some of you soon. *Shop Operations Manager: <http://www.boisebicycleproject.org/shop-operations-manager>* In 2017 BBP's team of dedicated volunteers and staff put over 1700 bicycles back onto the streets of Boise, including 800 to kids in our programs. We have 600 active members using the shop on a regular basis and another 1400 folks who use the shop as "walk/ride-ins." We have 14 staff members (5 full time) that operate our programs and foster an empowering and educational atmosphere to the Boise community and beyond regardless of income. The Shop Operations Manager oversees the daily activities that make all of the above possible for our community members, and the sales that provide funding for our programs. This is a big job with a lot of responsibility and limitless potential for impact. Full time with full benefits. See full *job posting* <http://www.boisebicycleproject.org/shop-operations-manager> for all of the details. See *this video* <https://www.youtube.com/watch?v=D-v5vS-03gk> for a little more about BBP. * <http://www.boisebicycleproject.org/shifting-gears-coordinator>* *Shifting Gears Coordinator: <http://www.boisebicycleproject.org/shifting-gears-coordinator>* The Shifting Gears program is the BBP’s partnership program with the Idaho Department of Corrections. Shifting Gears teaches bicycle mechanics to incarcerated individuals and provides free adult bikes to program participants upon release. The program provides inmates with vocational skills, impactful opportunities, and community connection. Shifting Gears currently operates at the South Boise Women’s Correctional Center, partners with the East Boise Re-Entry Center at the BBP, and is starting a program at the Idaho State Men's Correctional Center. This is a 25-30 hour a week position, but we would consider full time hours for the right candidate. See full *job posting* <http://www.boisebicycleproject.org/shifting-gears-coordinator> for all of the details. See *this video <https://www.youtube.com/watch?v=4Knf-1AAqrU>* about our program at the South Women's Facility. Or *this video <https://www.youtube.com/watch?v=ZeZM0xzOyCc>* about our new program at the Women's East ReEntry Center. Or contact Jimmy(a)boisebicycleproject.org or 208-429-6520 for immediate questions. Ride On! Jimmy Hallyburton Founder / Executive Director Boise Bicycle Project (208)-429-6520 1027 Lusk St Boise, ID 83706 www.boisebicycleproject.org Explore some of the BBP Journey in my TEDx Talk on Moving at the Speed of Discovery <https://youtu.be/yDubr-RjlCE?t=6s>!

1 0

The Ogden Bicycle Collective is Hiring a Head Mechanic
by Danielle Fry 02 Jan '18

02 Jan '18

Hello all, Please spread the word that the Ogden Bicycle Collective (Ogden, Utah) is hiring a Head Mechanic. The position is year-round with a lot of potential. Pay is $12-14 DOE. Details here! <https://bicyclecollective.org/ogden-news/item/657-obc-is-hiring-a-head-mech…> Cheers, -- Danielle Fry Director Ogden Bicycle Collective 936 28th Street Ogden, UT 84403 801-997-0336

1 0

Happy New Year Everyone!
by cyclista＠inventati.org 31 Dec '17

31 Dec '17

We all do such wonderful and important work, and I'd like to wish very one of you the best for the new year. Here's to able spirits, exciting work, good times, and profound development for every one of us and our projects in 2018!!!! Ride On! ~cyclista Nicholas :)

1 0

Job Opporutnity:Education/Outreach Coordinator
by Andy Fry 29 Dec '17

29 Dec '17

*Send resumes or questions to andy(a)cycleproject.org <andy(a)cycleproject.org>* *Job Description *- Education, Outreach, and Advocacy Coordinator Time Commitment: 20 hours/week, three-month probationary period Compensation: $13.75 hourly Reports to: President, Board of Directors *Responsibilities*: The Education, Outreach and Advocacy Coordinator will be responsible for overseeing all the activities happening at or near the Topeka Community Cycle Project, at 801 NE Poplar. This person’s responsibilities will include, but may not be limited to, BLAST support and enhancement, bicycle safety educator, public outreach coordinator and local advocate for bicycling access and infrastructure. Any responsibilities listed here may be delegated if an appropriate party is identified. *BLAST Support and Enhancemen*t- providing support to PE instructors in implementing BLAST curriculum and implementing trailer and bike fleet scheduling to maximize use and availability of BLAST resources to Topeka and Shawnee County. *Bicycle Safety Educator*- providing educational programming and bicycle promotional events to spur bicycling activity by “interested, but concerned” potential bicycle riders; enhancing access and bicycle ridership in Topeka. *Public Outreach Coordinator*- providing educational and bicycle resources in remote and community hubs where there is interest in the community. Bringing bicycles and best safety practices to the neighborhoods of Topeka and Shawnee County through grassroots and community events and community locations. *Local Advocate-* participating in community discussions, committees on active transportation, bicycling and active wellness pursuits. Also reaching beyond traditional bicycle specific discussions and attending MTPO and other meetings and public forums to integrate bicycle perspectives into a larger transportation and city planning and development discussion . *Skills necessary*: -LCI certification: ability to complete League of American Bicyclists Traffic Skills and LCI Certification, as it’s offered, within 6 months. -Familiarity with current social media platforms and Microsoft Office and Adobe products -Comfort with speaking in front of groups and presenting new ideas in a group setting. -Coordinating and engaging volunteers, in addition to a willingness to help in seeking funds to keep the position and organization sustained on a perpetual basis. *Topeka Community Cycle Project, 801 NE Poplar St. Topeka KS 66606*

1 0

Patron Bill of Rights (consider adopting)
by Angel York 23 Dec '17

23 Dec '17

This is a fantastic sign that illustrates excellent teaching practices, and many shops that don't have something similar would do well, in my opinion, to include something similar. As a patron of SPOKELAND, you have the right to the following - To pursue your own goals for your own bike - To be in control of the tools used on your bike - To always be asked before someone touches your bike - To ask & receive assistance from shop staff - To work on your bike in a SAFER SPACE [there is also a standard safer space agreement] - To be supported in your learning - To learn with staff

3 2

What's New at Cycle-RE-Cycle
by Cycle-Re-Cycle 23 Dec '17

23 Dec '17

https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b… Facebook (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b… Twitter (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b… Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) BUILDING UPDATE - WE NEED YOUR HELP! We recently signed the papers on our new headquarters at 159 East Napier, and there is A LOT of work that needs to be done. In order for our new home to be up-and-running for next spring we have to raise $50,000 for much-needed building renovations. Donate to our New Building Fund today! (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) All donations will go directly to support our new building and are tax deductible. CYCLE-RE-CYCLE IN THE NEWS ** CYCLE-RE-CYCLE LANDS NEW, LARGER, HIGH VISIBILITY DIGS ------------------------------------------------------------ By Pat Moody | Posted December 1, 2017 As the song goes, “when I get knocked down, I get up again,” and that’s exactly the attitude and plan for our friends at Cycle-Re-Cycle of Benton Harbor. READ MORE (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** CYCLE-RE-CYCLE Recycles building ------------------------------------------------------------ By LOUISE WREGE - HP Staff Writer | Posted December 9, 2017 What started in the garages of two St. Joseph neighbors in 2010 soon blossomed into Cycle-Re-Cycle, which rented space on Main Street near the back of a parking lot in Benton Harbor for $1 a month. READ MORE (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) CALL FOR VOLUNTEERS MAKE A DIFFERENCE IN 2018 Join us in making 2018 an exciting year for Cycle-RE-Cycle. We need volunteers to help with everything from bike mechanics to social media and grant writing, just let us know how you can bring your talents to CRC! Start Volunteering (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) THANK YOU SHOUTOUTS!! ** POWELL CONSTRUCTION ------------------------------------------------------------ Powell Construction has been instrumental in securing our new building and getting it up-and-running. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** SCORE ------------------------------------------------------------ Score, a volunteer business mentoring organization has worked closely with CRC to secure our new building and get our fundraising efforts running smoothly. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** HOLT BOSSE ------------------------------------------------------------ Holt Bosse has lent their support and marketing expertise to our organization, getting us ready for the next phase of Cycle-RE-Cycle. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** BENTON HARBOR LIONS FOUNDATION ------------------------------------------------------------ We would like to say thank you for your generous grant funding of $500 to our building fund. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** HORIZON BANK ------------------------------------------------------------ Thank you so much to Horizon Bank for the funding for the purchase of our new building. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** PASSARO, KAHNE & TAYLOR LAW OFFICES, P.L.L.C ------------------------------------------------------------ Thank you to our friends at Passaro, Kahne & Taylor Law Offices, P.L.L.C for providing their law expertise to us as we purchased our new building. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** FREDERICK S. UPTON FOUNDATION ------------------------------------------------------------ We want to say thank you for your generous grant for building renovations. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ============================================================ ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) Copyright © 2017 CRC, All rights reserved. You are receiving this email because you made a purchase from Cycle-RE-Cycle. Our mailing address is: CRC P.O. Box 1022 Benton Harbor, MI 49023 USA Want to change how you receive these emails? You can ** update your preferences (https://cycle-re-cycle-swm.us15.list-manage.com/profile?u=1e2651ac4b66b1b63…) or ** unsubscribe from this list (https://cycle-re-cycle-swm.us15.list-manage.com/unsubscribe?u=1e2651ac4b66b…) . Email Marketing Powered by MailChimp http://www.mailchimp.com/monkey-rewards/?utm_source=freemium_newsletter&utm…

2 1

Displaying Freewheel & Cassette Tools, spline tree and helm pix
by Bob Giordano 15 Dec '17

15 Dec '17

Attached are pix of the 'Spline Tree' and 'Helm' I spoke of in last email Bob Giordano wrote: All sounds good, the only new thing I'll add is a handy 'tool' we made: welded the FR1 freewheel remover to a small steel plate, then bolted the plate to a wall, right next to our truing stands and cone wrenches. Several times a day it's used: push the wheel onto the tool, spin counterclockwise and off comes the free wheel. our 1st one lasted 2 years til too stripped, then made another. Other than that, all other FW, Cassette and BB removers are on a spinning carousel we call the 'spline tree'. -- Bob Giordano Free Cycles Missoula Shop: 732 S. 1st St. West, ph. 541.7284 10AM-6PM Tues-Sat, www.freecycles.org Missoula Institute for Sustainable Transportation www.strans.org, mist(a)strans.org, 406.830.7676 > On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com > <mailto:jbisker@gmail.com>> wrote: > Heyyo! I've been in co-ops where they have neat ways of displaying the > various freewheel and cassette tools, like on a board next to the hub types > they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled > unhelpfully all together in a bin like we do?) Send a pic of what you got! > > tldr: show us your rad way of housing freewheel/cassette tools that makes it > easy for folks to find the right one. > > EXTRA CREDIT: same question re bottom bracket tools! > > xoxo > > Josh > > > Josh Bisker > 914-500-9890 <tel:(914)%20500-9890> > New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> > 596 Acres <http://596acres.org/> > Bindlestiff Family Cirkus <http://bindlestiff.org/>

1 0

Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette Tools (Nicole Muratore)
by Nicole Muratore 13 Dec '17

13 Dec '17

In a corner of our shop we keep specialty or large tools on both a labeled board and in toolboxes. For patrons new to our shop or unfamiliar with the tools, volunteers usually grab the tools. Otherwise, we keep everything labeled and (hopefully) easy enough for folks to find. Pics attached! Cheers, Nicole Muratore Bike Saviours Collective, Inc. http://www.bikesaviours.org Admin / Volunteer Coordinator (602) 429-9369 On Wed, Dec 13, 2017 at 2:07 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. An Easy One! Displaying Freewheel & Cassette Tools (Josh Bisker) > 2. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Ainsley Naylor) > 3. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Gabriel Trainer) > 4. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Jean-Fran?ois Caron) > > > ---------- Forwarded message ---------- > From: Josh Bisker <jbisker(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 01:31:25 -0500 > Subject: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette Tools > Heyyo! I've been in co-ops where they have neat ways of displaying the > various freewheel and cassette tools, like on a board next to the hub types > they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled > unhelpfully all together in a bin like we do?) Send a pic of what you got! > > tldr: show us your rad way of housing freewheel/cassette tools that makes > it easy for folks to find the right one. > > EXTRA CREDIT: same question re *bottom bracket tools!* > > xoxo > > Josh > > > Josh Bisker > 914-500-9890 <(914)%20500-9890> > New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> > 596 Acres <http://596acres.org/> > Bindlestiff Family Cirkus <http://bindlestiff.org/> > > > ---------- Forwarded message ---------- > From: Ainsley Naylor <needleandthread(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 10:41:47 -0500 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > Because these are the type of tools which are SMALL, important, easy to > break/strip, and not always cheap (hello, did you order a Maillard french > freewheel tool off of the internet because they are super hard to find???) > we DO keep ours in a closed bin on the table with our vices. > Bottom bracket tools are actually kept in our special tool area at the > front of the shop because if people can grab stuff they are more likely to > break it :( Hell even volunteer who do know how to use these tools properly > still abuse and break them. > > I guess generally we expect that volunteer will determine what tool is > required for a repair and retrieve and explain it, rather than people > figuring it out/finding it for themselves.... > > NOT THE ANSWER YOU WANTED SORRY JOSH!!!! > > Ainsley. > > On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: > >> Heyyo! I've been in co-ops where they have neat ways of displaying the >> various freewheel and cassette tools, like on a board next to the hub types >> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >> unhelpfully all together in a bin like we do?) Send a pic of what you got! >> >> tldr: show us your rad way of housing freewheel/cassette tools that makes >> it easy for folks to find the right one. >> >> EXTRA CREDIT: same question re *bottom bracket tools!* >> >> xoxo >> >> Josh >> >> >> Josh Bisker >> 914-500-9890 <(914)%20500-9890> >> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >> 596 Acres <http://596acres.org/> >> Bindlestiff Family Cirkus <http://bindlestiff.org/> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > ---------- Forwarded message ---------- > From: Gabriel Trainer <getrainer(a)bikefarm.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 11:59:24 -0800 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > At Bike Farm we have all of the freewheel and cassette tools laid out on a > magnetic strip so you can see the different shapes easily. Still a guess > and check method, but better than a bin of tools thrown together. > Gabriel > > On Dec 13, 2017 7:41 AM, "Ainsley Naylor" <needleandthread(a)gmail.com> > wrote: > >> Because these are the type of tools which are SMALL, important, easy to >> break/strip, and not always cheap (hello, did you order a Maillard french >> freewheel tool off of the internet because they are super hard to find???) >> we DO keep ours in a closed bin on the table with our vices. >> Bottom bracket tools are actually kept in our special tool area at the >> front of the shop because if people can grab stuff they are more likely to >> break it :( Hell even volunteer who do know how to use these tools properly >> still abuse and break them. >> >> I guess generally we expect that volunteer will determine what tool is >> required for a repair and retrieve and explain it, rather than people >> figuring it out/finding it for themselves.... >> >> NOT THE ANSWER YOU WANTED SORRY JOSH!!!! >> >> Ainsley. >> >> On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: >> >>> Heyyo! I've been in co-ops where they have neat ways of displaying the >>> various freewheel and cassette tools, like on a board next to the hub types >>> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >>> unhelpfully all together in a bin like we do?) Send a pic of what you got! >>> >>> tldr: show us your rad way of housing freewheel/cassette tools that >>> makes it easy for folks to find the right one. >>> >>> EXTRA CREDIT: same question re *bottom bracket tools!* >>> >>> xoxo >>> >>> Josh >>> >>> >>> Josh Bisker >>> 914-500-9890 <(914)%20500-9890> >>> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >>> 596 Acres <http://596acres.org/> >>> Bindlestiff Family Cirkus <http://bindlestiff.org/> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > ---------- Forwarded message ---------- > From: "Jean-François Caron" <jfcaron3(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 14:54:38 -0600 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > At the Bike Kitchen in Vancouver (from what I recall, having left over a > year ago), we only had the common Shimano-style freewheel and cassette > tools. The freewheel tool has a hole in it, so we just put it on a nail in > the wall, the cassette tool has a steel rod, so we stuck it in a hole in > the wall next to the aforementioned nail. > > Anything other than the standard Shimano-style tools, you had to ask a > mechanic to get it behind the counter. This is both because it's less > confusing for newbies who 99% have the Shimano style, but also because a > lot of the other styles are much easier to strip, e.g. the two-knotch > Suntour. > > Y'all know the trick about keeping the freewheel tool engaged with a nut > right? > > Jean-François > > On Dec 13, 2017, at 13:59 , Gabriel Trainer <getrainer(a)bikefarm.org> > wrote: > > At Bike Farm we have all of the freewheel and cassette tools laid out on a > magnetic strip so you can see the different shapes easily. Still a guess > and check method, but better than a bin of tools thrown together. > Gabriel > > On Dec 13, 2017 7:41 AM, "Ainsley Naylor" <needleandthread(a)gmail.com> > wrote: > >> Because these are the type of tools which are SMALL, important, easy to >> break/strip, and not always cheap (hello, did you order a Maillard french >> freewheel tool off of the internet because they are super hard to find???) >> we DO keep ours in a closed bin on the table with our vices. >> Bottom bracket tools are actually kept in our special tool area at the >> front of the shop because if people can grab stuff they are more likely to >> break it :( Hell even volunteer who do know how to use these tools properly >> still abuse and break them. >> >> I guess generally we expect that volunteer will determine what tool is >> required for a repair and retrieve and explain it, rather than people >> figuring it out/finding it for themselves.... >> >> NOT THE ANSWER YOU WANTED SORRY JOSH!!!! >> >> Ainsley. >> >> On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: >> >>> Heyyo! I've been in co-ops where they have neat ways of displaying the >>> various freewheel and cassette tools, like on a board next to the hub types >>> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >>> unhelpfully all together in a bin like we do?) Send a pic of what you got! >>> >>> tldr: show us your rad way of housing freewheel/cassette tools that >>> makes it easy for folks to find the right one. >>> >>> EXTRA CREDIT: same question re *bottom bracket tools!* >>> >>> xoxo >>> >>> Josh >>> >>> >>> Josh Bisker >>> 914-500-9890 <(914)%20500-9890> >>> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >>> 596 Acres <http://596acres.org/> >>> Bindlestiff Family Cirkus <http://bindlestiff.org/> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > >

1 0

An Easy One! Displaying Freewheel & Cassette Tools
by Josh Bisker 13 Dec '17

13 Dec '17

Heyyo! I've been in co-ops where they have neat ways of displaying the various freewheel and cassette tools, like on a board next to the hub types they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled unhelpfully all together in a bin like we do?) Send a pic of what you got! tldr: show us your rad way of housing freewheel/cassette tools that makes it easy for folks to find the right one. EXTRA CREDIT: same question re *bottom bracket tools!* xoxo Josh Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

6 5

Re: [TheThinkTank] Thethinktank Digest, Vol 135, Issue 6
by Tegan Moss [B!KE] 13 Dec '17

13 Dec '17

On Dec 13, 2017 4:08 PM, <thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. An Easy One! Displaying Freewheel & Cassette Tools (Josh Bisker) > 2. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Ainsley Naylor) > 3. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Gabriel Trainer) > 4. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Jean-Fran?ois Caron) > > > ---------- Forwarded message ---------- > From: Josh Bisker <jbisker(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 01:31:25 -0500 > Subject: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette Tools > Heyyo! I've been in co-ops where they have neat ways of displaying the > various freewheel and cassette tools, like on a board next to the hub types > they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled > unhelpfully all together in a bin like we do?) Send a pic of what you got! > > tldr: show us your rad way of housing freewheel/cassette tools that makes > it easy for folks to find the right one. > > EXTRA CREDIT: same question re *bottom bracket tools!* > > xoxo > > Josh > > > Josh Bisker > 914-500-9890 <(914)%20500-9890> > New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> > 596 Acres <http://596acres.org/> > Bindlestiff Family Cirkus <http://bindlestiff.org/> > > > ---------- Forwarded message ---------- > From: Ainsley Naylor <needleandthread(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 10:41:47 -0500 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > Because these are the type of tools which are SMALL, important, easy to > break/strip, and not always cheap (hello, did you order a Maillard french > freewheel tool off of the internet because they are super hard to find???) > we DO keep ours in a closed bin on the table with our vices. > Bottom bracket tools are actually kept in our special tool area at the > front of the shop because if people can grab stuff they are more likely to > break it :( Hell even volunteer who do know how to use these tools properly > still abuse and break them. > > I guess generally we expect that volunteer will determine what tool is > required for a repair and retrieve and explain it, rather than people > figuring it out/finding it for themselves.... > > NOT THE ANSWER YOU WANTED SORRY JOSH!!!! > > Ainsley. > > On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: > >> Heyyo! I've been in co-ops where they have neat ways of displaying the >> various freewheel and cassette tools, like on a board next to the hub types >> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >> unhelpfully all together in a bin like we do?) Send a pic of what you got! >> >> tldr: show us your rad way of housing freewheel/cassette tools that makes >> it easy for folks to find the right one. >> >> EXTRA CREDIT: same question re *bottom bracket tools!* >> >> xoxo >> >> Josh >> >> >> Josh Bisker >> 914-500-9890 <(914)%20500-9890> >> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >> 596 Acres <http://596acres.org/> >> Bindlestiff Family Cirkus <http://bindlestiff.org/> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > ---------- Forwarded message ---------- > From: Gabriel Trainer <getrainer(a)bikefarm.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 11:59:24 -0800 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > At Bike Farm we have all of the freewheel and cassette tools laid out on a > magnetic strip so you can see the different shapes easily. Still a guess > and check method, but better than a bin of tools thrown together. > Gabriel > > On Dec 13, 2017 7:41 AM, "Ainsley Naylor" <needleandthread(a)gmail.com> > wrote: > >> Because these are the type of tools which are SMALL, important, easy to >> break/strip, and not always cheap (hello, did you order a Maillard french >> freewheel tool off of the internet because they are super hard to find???) >> we DO keep ours in a closed bin on the table with our vices. >> Bottom bracket tools are actually kept in our special tool area at the >> front of the shop because if people can grab stuff they are more likely to >> break it :( Hell even volunteer who do know how to use these tools properly >> still abuse and break them. >> >> I guess generally we expect that volunteer will determine what tool is >> required for a repair and retrieve and explain it, rather than people >> figuring it out/finding it for themselves.... >> >> NOT THE ANSWER YOU WANTED SORRY JOSH!!!! >> >> Ainsley. >> >> On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: >> >>> Heyyo! I've been in co-ops where they have neat ways of displaying the >>> various freewheel and cassette tools, like on a board next to the hub types >>> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >>> unhelpfully all together in a bin like we do?) Send a pic of what you got! >>> >>> tldr: show us your rad way of housing freewheel/cassette tools that >>> makes it easy for folks to find the right one. >>> >>> EXTRA CREDIT: same question re *bottom bracket tools!* >>> >>> xoxo >>> >>> Josh >>> >>> >>> Josh Bisker >>> 914-500-9890 <(914)%20500-9890> >>> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >>> 596 Acres <http://596acres.org/> >>> Bindlestiff Family Cirkus <http://bindlestiff.org/> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > ---------- Forwarded message ---------- > From: "Jean-François Caron" <jfcaron3(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 14:54:38 -0600 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > At the Bike Kitchen in Vancouver (from what I recall, having left over a > year ago), we only had the common Shimano-style freewheel and cassette > tools. The freewheel tool has a hole in it, so we just put it on a nail in > the wall, the cassette tool has a steel rod, so we stuck it in a hole in > the wall next to the aforementioned nail. > > Anything other than the standard Shimano-style tools, you had to ask a > mechanic to get it behind the counter. This is both because it's less > confusing for newbies who 99% have the Shimano style, but also because a > lot of the other styles are much easier to strip, e.g. the two-knotch > Suntour. > > Y'all know the trick about keeping the freewheel tool engaged with a nut > right? > > Jean-François > > On Dec 13, 2017, at 13:59 , Gabriel Trainer <getrainer(a)bikefarm.org> > wrote: > > At Bike Farm we have all of the freewheel and cassette tools laid out on a > magnetic strip so you can see the different shapes easily. Still a guess > and check method, but better than a bin of tools thrown together. > Gabriel > > On Dec 13, 2017 7:41 AM, "Ainsley Naylor" <needleandthread(a)gmail.com> > wrote: > >> Because these are the type of tools which are SMALL, important, easy to >> break/strip, and not always cheap (hello, did you order a Maillard french >> freewheel tool off of the internet because they are super hard to find???) >> we DO keep ours in a closed bin on the table with our vices. >> Bottom bracket tools are actually kept in our special tool area at the >> front of the shop because if people can grab stuff they are more likely to >> break it :( Hell even volunteer who do know how to use these tools properly >> still abuse and break them. >> >> I guess generally we expect that volunteer will determine what tool is >> required for a repair and retrieve and explain it, rather than people >> figuring it out/finding it for themselves.... >> >> NOT THE ANSWER YOU WANTED SORRY JOSH!!!! >> >> Ainsley. >> >> On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: >> >>> Heyyo! I've been in co-ops where they have neat ways of displaying the >>> various freewheel and cassette tools, like on a board next to the hub types >>> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >>> unhelpfully all together in a bin like we do?) Send a pic of what you got! >>> >>> tldr: show us your rad way of housing freewheel/cassette tools that >>> makes it easy for folks to find the right one. >>> >>> EXTRA CREDIT: same question re *bottom bracket tools!* >>> >>> xoxo >>> >>> Josh >>> >>> >>> Josh Bisker >>> 914-500-9890 <(914)%20500-9890> >>> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >>> 596 Acres <http://596acres.org/> >>> Bindlestiff Family Cirkus <http://bindlestiff.org/> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > >

1 0

Looking for HR and Compensation policies
by CZ Mike 12 Dec '17

12 Dec '17

Urban Bike Project of Wilmington, DE is growing and we need to get better policies in place for addressing HR and Compensation issues. As a member of the Board of Directors and an active volunteer I'm charged with developing some policies, procedures and guidelines for managing employees, including roles and responsibilities of Board members and the Executive Director. If anyone has documentation that you are willing to share to give me a leg-up, that would be great, TIA, Mike

1 0

Re: [TheThinkTank] Visual of What An Exchange Program Could look Like
by rob＠robertgrossmandesign.com 05 Dec '17

05 Dec '17

3 2

Re: [TheThinkTank] Thethinktank Digest, Vol 135, Issue 3
by Shawn Höffarth 05 Dec '17

05 Dec '17

please take me off this list. thanks Shawn Hoffarth TheCrew - Skateboarding Advocate On Tue, Dec 5, 2017 at 1:06 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. Re: Visual of What An Exchange Program Could look Like > (francisco diamond) > 2. Re: Visual of What An Exchange Program Could look Like > (rob(a)robertgrossmandesign.com) > 3. Re: Visual of What An Exchange Program Could look Like > (francisco diamond) > > > ---------- Forwarded message ---------- > From: francisco diamond <frdiamond(a)msn.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Mon, 4 Dec 2017 21:31:07 +0000 > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could look > Like > Hi, Robert > I am on the planning committee for bike! bike! Can you repost your > blueprint maybe I can use portions of it when we set up. > > Get Outlook for iOS <https://aka.ms/o0ukef> > ------------------------------ > *From:* Thethinktank <thethinktank-bounces(a)lists.bikecollectives.org> on > behalf of rob(a)robertgrossmandesign.com <rob(a)robertgrossmandesign.com> > *Sent:* Wednesday, November 29, 2017 9:21:27 PM > *To:* The Think Tank > *Subject:* Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > > Hi Lauren and TT, > > Great thoughts and questions! I added them to the Master Blueprint, which > can be viewed here... > https://realtimeboard.com/app/board/o9J_k0OiQZc=/ > > If Ainsley would like to send her notes as bullet points, they can be > added to the Blueprint as well. > > As for intake procedures, that's a great idea. It would be awesome if > someone would act out how that would go down and record it so it can > added into this to be referenced later. > > There are already sample application forms for both shops and > exchangees put together. I'll get them posted soon for everyone to comment > on. > > Lauren, what sort of troubleshooting of international exchange issues are > you referring to? > > > > > -------- Original Message -------- > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > From: Lauren Warbeck <lauren.warbeck(a)gmail.com> > Date: Mon, November 20, 2017 1:50 pm > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > > Hey buds! > > As often, this is a project that we started exploring a few years ago that > fell to the wayside, and that folks before us started working on too. I'm > so excited to see it revived! Ainsley, I think you recently unearthed our > notes? > > I think this is a great overall framework. I'm sure you've thought about > these things, but just to put them out there on the TT... > > In my experience, each shop will have their own culture and procedures > around taking on volunteers, and resources to do so will be highly > variable. For that reason, I think this general rubric is great. Once you > really get into the details, could part of the application require each > shop to outline what their intake procedure is? Could an overall framework > be developed that shops can draw on for their interviews/questions to > consider...like suggested application details. Are there thoughts yet on > what a suggested application could look like in terms of content? > > For international exchanges, the most significant roadblock, I think, is > coordinating visas, permits, and taxation for those shops that operate more > formally in the registered non-profit paradigm. Most shops, I suspect, > can't afford the risk inherent to having noncitizen workers or afford the > potential heat from the law on having noncitizens working in their shops. > Could a guideline to the opportunities and risks inherent to volunteering > or working in another country be provided to the person seeking exchange? > And for those orgs that aren't incorporated in the formal nonprofit > paradigm, could there be a way to ensure discretion while trying to > organize an international exchange online? Or a list of guidelines about > how to stay off the radar so that no one gets deported? Or is this being > conceived of us as an exchange that takes place within the borders of a > given country? > > One thing I've thought about was that if the exchange was considered > training or professional development, home shops could pay their OWN > employees to go on an exchange. As in, pay them for the hours they work at > another shop. The receiving shop, if they have the funds, could even give > a grant or donation or funding to the other shop to fund the > exchange...like a grant for professional development. The legal terrain > here will be highly contextual, though. > > It would also be good to detail some expectations of the receiving shop in > terms of what support/welcome/orientation to the shop and community can and > would be offered, and to have a point person or two in the shop who will be > the sort of ambassador of the org/community/town/city. Again, general > guidelines specific shops could draw on in developing their support offer > would be helpful. > > In general, in my experience, exchanges and volunteers from other shops > have worked out well, and part of that is because there is often a > preexisting relationship between the incoming person and someone at the > recieving shop. The great thing about an exchange is that it could not > require that preexisting relationship...but it also means there is a risk > of taking on people who aren't a good fit for a shop, or the exchange > finding out the shop isn't right for them once they arrive. Will there be > a suggested procedure in place for vetting folks and for ending an exchange > preemptively? Like a suggested procedure for dealing with conflict, or a > budget for escape haha. A simple way might be to have a question on the > application that asks for references (preferably at other shops), and a > question around whether they've been on exchange and where, with a point > person potential exchange recipients can contact at that shop as a > reference. Is that too policey? Or is it just due diligence? > > Hmmmm I love this project. I'm personally really interested in > troubleshooting the international exchange issues. > > > > On Sat, Nov 18, 2017 at 5:08 PM, <rob(a)robertgrossmandesign.com> wrote: > >> Dear Thinktank, >> >> Here is a visual idea of how we can develop a (mostly) self-sustaining >> exchange program between Community Bicycle Workshops. >> >> http://atmoslabs.com/community-bicycle-workshop-exchange-storyboard/ >> >> Please tear into it. >> >> Cheers >> >> Rob >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > ------------------------------ > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > > ---------- Forwarded message ---------- > From: <rob(a)robertgrossmandesign.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 05 Dec 2017 10:09:52 -0700 > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could look > Like > Francisco, > > Try this link. It's for the Exchange's workspace. Let me know if there > is a problem. > https://realtimeboard.com/app/board/o9J_k0OiQZc=/ > > You may want to consider using the blueprint's structure on a spreadsheet > in Excel or Google Sheets. If you have any questions shoot me an email and > I'll do my best to help. > > All the best, > > Rob > > > > -------- Original Message -------- > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > From: francisco diamond <frdiamond(a)msn.com> > Date: Mon, December 04, 2017 2:31 pm > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > > Hi, Robert > I am on the planning committee for bike! bike! Can you repost your > blueprint maybe I can use portions of it when we set up. > > Get Outlook for iOS <https://aka.ms/o0ukef> > ------------------------------ > *From:* Thethinktank <thethinktank-bounces(a)lists.bikecollectives.org> on > behalf of rob(a)robertgrossmandesign.com <rob(a)robertgrossmandesign.com> > *Sent:* Wednesday, November 29, 2017 9:21:27 PM > *To:* The Think Tank > *Subject:* Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > > Hi Lauren and TT, > > Great thoughts and questions! I added them to the Master Blueprint, which > can be viewed here... > https://realtimeboard.com/app/board/o9J_k0OiQZc=/ > > If Ainsley would like to send her notes as bullet points, they can be > added to the Blueprint as well. > > As for intake procedures, that's a great idea. It would be awesome if > someone would act out how that would go down and record it so it can > added into this to be referenced later. > > There are already sample application forms for both shops and > exchangees put together. I'll get them posted soon for everyone to comment > on. > > Lauren, what sort of troubleshooting of international exchange issues are > you referring to? > > > > > -------- Original Message -------- > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > From: Lauren Warbeck <lauren.warbeck(a)gmail.com> > Date: Mon, November 20, 2017 1:50 pm > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > > Hey buds! > > As often, this is a project that we started exploring a few years ago that > fell to the wayside, and that folks before us started working on too. I'm > so excited to see it revived! Ainsley, I think you recently unearthed our > notes? > > I think this is a great overall framework. I'm sure you've thought about > these things, but just to put them out there on the TT... > > In my experience, each shop will have their own culture and procedures > around taking on volunteers, and resources to do so will be highly > variable. For that reason, I think this general rubric is great. Once you > really get into the details, could part of the application require each > shop to outline what their intake procedure is? Could an overall framework > be developed that shops can draw on for their interviews/questions to > consider...like suggested application details. Are there thoughts yet on > what a suggested application could look like in terms of content? > > For international exchanges, the most significant roadblock, I think, is > coordinating visas, permits, and taxation for those shops that operate more > formally in the registered non-profit paradigm. Most shops, I suspect, > can't afford the risk inherent to having noncitizen workers or afford the > potential heat from the law on having noncitizens working in their shops. > Could a guideline to the opportunities and risks inherent to volunteering > or working in another country be provided to the person seeking exchange? > And for those orgs that aren't incorporated in the formal nonprofit > paradigm, could there be a way to ensure discretion while trying to > organize an international exchange online? Or a list of guidelines about > how to stay off the radar so that no one gets deported? Or is this being > conceived of us as an exchange that takes place within the borders of a > given country? > > One thing I've thought about was that if the exchange was considered > training or professional development, home shops could pay their OWN > employees to go on an exchange. As in, pay them for the hours they work at > another shop. The receiving shop, if they have the funds, could even give > a grant or donation or funding to the other shop to fund the > exchange...like a grant for professional development. The legal terrain > here will be highly contextual, though. > > It would also be good to detail some expectations of the receiving shop in > terms of what support/welcome/orientation to the shop and community can and > would be offered, and to have a point person or two in the shop who will be > the sort of ambassador of the org/community/town/city. Again, general > guidelines specific shops could draw on in developing their support offer > would be helpful. > > In general, in my experience, exchanges and volunteers from other shops > have worked out well, and part of that is because there is often a > preexisting relationship between the incoming person and someone at the > recieving shop. The great thing about an exchange is that it could not > require that preexisting relationship...but it also means there is a risk > of taking on people who aren't a good fit for a shop, or the exchange > finding out the shop isn't right for them once they arrive. Will there be > a suggested procedure in place for vetting folks and for ending an exchange > preemptively? Like a suggested procedure for dealing with conflict, or a > budget for escape haha. A simple way might be to have a question on the > application that asks for references (preferably at other shops), and a > question around whether they've been on exchange and where, with a point > person potential exchange recipients can contact at that shop as a > reference. Is that too policey? Or is it just due diligence? > > Hmmmm I love this project. I'm personally really interested in > troubleshooting the international exchange issues. > > > > On Sat, Nov 18, 2017 at 5:08 PM, <rob(a)robertgrossmandesign.com> wrote: > >> Dear Thinktank, >> >> Here is a visual idea of how we can develop a (mostly) self-sustaining >> exchange program between Community Bicycle Workshops. >> >> http://atmoslabs.com/community-bicycle-workshop-exchange-storyboard/ >> >> Please tear into it. >> >> Cheers >> >> Rob >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > ------------------------------ > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > ------------------------------ > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > > ---------- Forwarded message ---------- > From: francisco diamond <frdiamond(a)msn.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 5 Dec 2017 19:37:36 +0000 > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could look > Like > Ok lol, I ITed my way in the last part of url wasn’t there. What is a > corner marshal? > > Get Outlook for iOS <https://aka.ms/o0ukef> > ------------------------------ > *From:* Thethinktank <thethinktank-bounces(a)lists.bikecollectives.org> on > behalf of rob(a)robertgrossmandesign.com <rob(a)robertgrossmandesign.com> > *Sent:* Tuesday, December 5, 2017 9:09:52 AM > *To:* The Think Tank > *Subject:* Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > > Francisco, > > Try this link. It's for the Exchange's workspace. Let me know if there > is a problem. > https://realtimeboard.com/app/board/o9J_k0OiQZc=/ > > You may want to consider using the blueprint's structure on a spreadsheet > in Excel or Google Sheets. If you have any questions shoot me an email and > I'll do my best to help. > > All the best, > > Rob > > > > -------- Original Message -------- > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > From: francisco diamond <frdiamond(a)msn.com> > Date: Mon, December 04, 2017 2:31 pm > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > > Hi, Robert > I am on the planning committee for bike! bike! Can you repost your > blueprint maybe I can use portions of it when we set up. > > Get Outlook for iOS <https://aka.ms/o0ukef> > ------------------------------ > *From:* Thethinktank <thethinktank-bounces(a)lists.bikecollectives.org> on > behalf of rob(a)robertgrossmandesign.com <rob(a)robertgrossmandesign.com> > *Sent:* Wednesday, November 29, 2017 9:21:27 PM > *To:* The Think Tank > *Subject:* Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > > Hi Lauren and TT, > > Great thoughts and questions! I added them to the Master Blueprint, which > can be viewed here... > https://realtimeboard.com/app/board/o9J_k0OiQZc=/ > > If Ainsley would like to send her notes as bullet points, they can be > added to the Blueprint as well. > > As for intake procedures, that's a great idea. It would be awesome if > someone would act out how that would go down and record it so it can > added into this to be referenced later. > > There are already sample application forms for both shops and > exchangees put together. I'll get them posted soon for everyone to comment > on. > > Lauren, what sort of troubleshooting of international exchange issues are > you referring to? > > > > > -------- Original Message -------- > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > From: Lauren Warbeck <lauren.warbeck(a)gmail.com> > Date: Mon, November 20, 2017 1:50 pm > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > > Hey buds! > > As often, this is a project that we started exploring a few years ago that > fell to the wayside, and that folks before us started working on too. I'm > so excited to see it revived! Ainsley, I think you recently unearthed our > notes? > > I think this is a great overall framework. I'm sure you've thought about > these things, but just to put them out there on the TT... > > In my experience, each shop will have their own culture and procedures > around taking on volunteers, and resources to do so will be highly > variable. For that reason, I think this general rubric is great. Once you > really get into the details, could part of the application require each > shop to outline what their intake procedure is? Could an overall framework > be developed that shops can draw on for their interviews/questions to > consider...like suggested application details. Are there thoughts yet on > what a suggested application could look like in terms of content? > > For international exchanges, the most significant roadblock, I think, is > coordinating visas, permits, and taxation for those shops that operate more > formally in the registered non-profit paradigm. Most shops, I suspect, > can't afford the risk inherent to having noncitizen workers or afford the > potential heat from the law on having noncitizens working in their shops. > Could a guideline to the opportunities and risks inherent to volunteering > or working in another country be provided to the person seeking exchange? > And for those orgs that aren't incorporated in the formal nonprofit > paradigm, could there be a way to ensure discretion while trying to > organize an international exchange online? Or a list of guidelines about > how to stay off the radar so that no one gets deported? Or is this being > conceived of us as an exchange that takes place within the borders of a > given country? > > One thing I've thought about was that if the exchange was considered > training or professional development, home shops could pay their OWN > employees to go on an exchange. As in, pay them for the hours they work at > another shop. The receiving shop, if they have the funds, could even give > a grant or donation or funding to the other shop to fund the > exchange...like a grant for professional development. The legal terrain > here will be highly contextual, though. > > It would also be good to detail some expectations of the receiving shop in > terms of what support/welcome/orientation to the shop and community can and > would be offered, and to have a point person or two in the shop who will be > the sort of ambassador of the org/community/town/city. Again, general > guidelines specific shops could draw on in developing their support offer > would be helpful. > > In general, in my experience, exchanges and volunteers from other shops > have worked out well, and part of that is because there is often a > preexisting relationship between the incoming person and someone at the > recieving shop. The great thing about an exchange is that it could not > require that preexisting relationship...but it also means there is a risk > of taking on people who aren't a good fit for a shop, or the exchange > finding out the shop isn't right for them once they arrive. Will there be > a suggested procedure in place for vetting folks and for ending an exchange > preemptively? Like a suggested procedure for dealing with conflict, or a > budget for escape haha. A simple way might be to have a question on the > application that asks for references (preferably at other shops), and a > question around whether they've been on exchange and where, with a point > person potential exchange recipients can contact at that shop as a > reference. Is that too policey? Or is it just due diligence? > > Hmmmm I love this project. I'm personally really interested in > troubleshooting the international exchange issues. > > > > On Sat, Nov 18, 2017 at 5:08 PM, <rob(a)robertgrossmandesign.com> wrote: > >> Dear Thinktank, >> >> Here is a visual idea of how we can develop a (mostly) self-sustaining >> exchange program between Community Bicycle Workshops. >> >> http://atmoslabs.com/community-bicycle-workshop-exchange-storyboard/ >> >> Please tear into it. >> >> Cheers >> >> Rob >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > ------------------------------ > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > ------------------------------ > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > >

1 0

Re: [TheThinkTank] Visual of What An Exchange Program Could look Like
by rob＠robertgrossmandesign.com 04 Dec '17

04 Dec '17

2 1

Health Hazard from Drum Brakes
by Jean-François Caron 01 Dec '17

01 Dec '17

Hi everyone, I recently came across a vendor selling a drum brake[1] where they claimed it had "No asbes" i.e. no asbestos. This led me to search about asbestos in bicycle brakes, and indeed it's a thing: http://santanatandem.com/Library/AraiDBrakeIns.pdf <http://santanatandem.com/Library/AraiDBrakeIns.pdf> (go to page 2, paragraph 4 in "Service") The quantity is small and it's not friable, it's solid chunks (like old chemistry lab benches) which pose no actual hazard. Unless you are frequently overhauling these drum brakes with abrasives & sucking in the dust, the risk should be negligible, but it's good to know about. If any shops out there have a bin for drum brakes, I'd suggest putting a warning label on it, or attaching a tag to the individual brakes if they are in a mixed bin. Jean-François [1] http://www.diacompe.com.tw/product/mlb-50/

2 1

bikes on display
by Edward Stewart 28 Nov '17

28 Nov '17

We at the Elyria (Ohio) Bicycle Education Center are pretty new to much of how to run a coop and shop. We appreciate the collective intelligence being shared here. We are looking for a good and inexpensive way to display bikes in our front 'sales room' without relying on kickstands to hold up the bikes (some have'em, some don't). Willing to build wood racks or whatever but have not seen anything reasonable yet. Any suggestions? -- Ed Stewart emsco514(a)gmail.com 440-365-6784 *I have an escape mechanism for stress: my bike.* <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

9 9