- TheThinkTank - lists.bikecollectives.org

Shop repair stands
by Tigre Bici 08 Aug '18

08 Aug '18

Hello everyone. This email is for asking on reocmendations on repair stands. Since you have been uploading the DIY ones we have some odeas on doing some to move around but on the shop we have been using a portable plastic repair stand and we have decided on buying a shop one that might last longer and will make it easier to fix bikes (the plastic ones usually dont support heavy bikes and we have suffer some accidents with bike moving down the stand) Some time bak we looked at teh park tool deluxe stand and now that we might be able to purchase it we find out that the base is not included and that costs $300 more. So, any recomendations on a shop stand, not the plastic ones, that we can buy with $400 us dollars? Or have you made your own base to put the park tool stand that has worked? Thanks R.

7 6

Incentivizing regular shifts in volunteer run shops!
by Sarah FioRito 07 Aug '18

07 Aug '18

Hey Folks! We at Kickstand community Bike Shop in East Vancouver have had ongoing challenges with staying open for all our our regular shop hours because we sometimes do not have enough volunteers signed up to volunteer to facilitate our volunteer-run shop on a given day. Does anyone have strategies for encouraging volunteer commitment and regular shifts so that we can reliably open for our posted hours? Obviously, transitioning to having paid staff is one pathway, though there are probably many other alternatives that would meet our needs and encourage community participation in keeping the space open. Sarah

4 3

Re Shop Repair stands
by Geoffrey Smart 06 Aug '18

06 Aug '18

We have bought several PRS 2.2 stands after having used first cheap chinese stands then portable Park Tool stands which we still use for events or when we have lots of volunteers. We also have a double headed Unior stand but this is not as well made as the PRS2.2 If you are not in a hurry look for a used PRS 2.2. We bought our first one on Gumtree which is our local version of craigslist. It was over 15 years old and the only sign of wear was on the rubber grips which are replaceable. PRS2.2 are basically volunteer proof as everything is heavy duty metal. We bought half inch plate and had the dealer bore and counter bore the holes by bringing in the stand as a template. This is important as one of the 4 holes is slightly off centre so that you get correct directional alignment if you are copying the original plates. Cost including drilling was around $100 US and the cost of labour in Australia is higher than the U.S. We like double headed stands as it allows experienced volunteers to continue with a project while also assisting a less experienced volunteer when they need advice. Geoff Smart Back2Bikes Port Melbourne

1 0

thinking forward - travel - Bike!Bike! LA
by Fabian W. 04 Aug '18

04 Aug '18

Hello Again about the Travel Equity funding for Bike!Bike! LA. In the next couple of weeks we need to make decisions about the funding distribution of the Travel Equity funds. If your organization/shop/project is thinking of contributing please let us know what you may expect to raise, so we can take that into consideration. Since in most cases we will refund travelers once they get to LA we don’t need to have the money until then. And please continue to promote our crowd funding site (https://bikebike2018.raisely.com) among your friends, partners, and networks. Every dollar counts significantly for our Latin-American friends. Thank you for your patience and especially your contributions, _fabian http://pedaludico.org

1 0

Has anyone read Bike Lanes are White Lanes
by jfcaron＠phas.ubc.ca 31 Jul '18

31 Jul '18

Has anyone read this academic work? http://www.nebraskapress.unl.edu/university-of-nebraska-press/9780803276789/ <http://www.nebraskapress.unl.edu/university-of-nebraska-press/9780803276789/> Would you recommend it for a bike co-op's library, or for a non-planning-scholar person to buy & read? Jean-François

7 6

Bike!Bike! para todos.
by Fabian W. 31 Jul '18

31 Jul '18

Hi All Please help support participation in Bike!Bike! 2018 by groups from Mexico and Central/South America. We have a Travel Equity program to help fund the very expensive visa process and crazy expensive flight costs. There is a crowd funding site for this purpose: https://bikebike2018.raisely.com/ . Any amount you can contribute you be very helpful. We are also offering some cool gifts. Please help! Gracias, _fabian W.

1 0

Re: [TheThinkTank] : Has anyone read Bike Lanes are White Lanes?
by Stuart Nottingham 30 Jul '18

30 Jul '18

I have. It's well worth reading if you're at all interested in equity in cycling. On Mon, Jul 30, 2018, 16:04 <thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > > Today's Topics: > > 1. Has anyone read Bike Lanes are White Lanes (jfcaron(a)phas.ubc.ca) > 2. Re: Has anyone read Bike Lanes are White Lanes (Tigre Bici) > 3. Re: Has anyone read Bike Lanes are White Lanes (Stephen Andruski) > 4. Re: Has anyone read Bike Lanes are White Lanes (Steve) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 30 Jul 2018 10:55:03 -0500 > From: jfcaron(a)phas.ubc.ca > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Subject: [TheThinkTank] Has anyone read Bike Lanes are White Lanes > Message-ID: <B49E0956-D49F-4229-B2F2-62B625175636(a)phas.ubc.ca> > Content-Type: text/plain; charset="utf-8" > > Has anyone read this academic work? > > http://www.nebraskapress.unl.edu/university-of-nebraska-press/9780803276789/ > < > http://www.nebraskapress.unl.edu/university-of-nebraska-press/9780803276789/ > > > > Would you recommend it for a bike co-op's library, or for a > non-planning-scholar person to buy & read? > > Jean-Fran?ois >

1 0

Bike!Bike! registration
by Vincenzo loco 28 Jul '18

28 Jul '18

This is starting to feel like that new years party you hosted where you start to worry about ppl showing up :P Remember that if you are coming, register now! Also, please sign up to run a workshop ASAP! We want to get those in order soon so we can have a fun weekend planned! Once you have registered, go back to the main page and scroll down to where you can click on the view workshops and then new workshop button. The site will ask for your email to confirm that you are registered. Bike bike bike bike bike bike bike bike bike bikebike.org also plz remember that we have a fundraiser going on to help get folks into the US for B!B! https://bikebike2018.raisely.com/ aaaaand if you wanna help out with bike bike you can sign up to volunteer. *https://tinyurl.com/volunteerBB2018* <https://tinyurl.com/volunteerBB2018> -Enzomatic

1 0

Re: [TheThinkTank] Thethinktank Digest, Vol 142, Issue 3
by Geoff Heath 25 Jul '18

25 Jul '18

This is a reply to Fabian's question re; Travel equity fundraising a while back. Winnipeg raised over $2000 last year for the travel equity fund through a series of monthly bike builds we did for the 4 months leading up to the B!B! conference. We figured that building & selling some bikes was a lot easier than organizing yet another fundraiser, so once a month The Wrench hosted a friday night beer (byob) pizza (paid for by The WRENCH) and wrenching night. We invited any and all mechanics who wanted to contribute to B!B! organizing in an easy, tangible way to come out and wrench on bikes for a few hours. Over 4 such nights we built and subsequently sold 20 bikes with all the proceeds going directly towards the bikebike travel equity fund. It was a really easy way to plug in folks from the extended mechanic community who wanted to contribute to organizing but not in a "sit in meetings" or "deal with piles of emails" sort of way. Winnipeg is blessed with a pretty good stock of donated/salvaged bikes in the summer, so this initiative didn't really "cost" The WRENCH aside from paying for any required consumables (cables, housing, lube) and some cheap pizza once a month. And if we build them, they tend to sell without too much effort. I'd recommend this method to any shops who might want to contribute to raising some $$$ for this important fund. That said, Winnipeg is laying low this summer, so don't expect another 2G coming from us! Sorry! Lookin forward to LA! Cheers, Geoff Geoff Heath, Education Director The Winnipeg Repair Education N' Cycling Hub 1057 Logan Ave. Winnipeg, MB R3E 3N8 Treaty 1 Territory, Homeland of the Metis Nation http://www.thewrench.ca 204-296-3389 On Wed, Jul 4, 2018 at 3:04 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > > Today's Topics: > > 1. Bike!Bike! Los Angeles - Travel Equity (Fabian W.) > 2. Re: Bike Collective VS. Simply giving away bikes (DancesWithCars) > 3. Re: Bike Collective VS. Simply giving away bikes (Cycle-Re-Cycle) > 4. Re: Bike Collective VS. Simply giving away bikes (Bike Talk) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 3 Jul 2018 21:39:13 -0400 > From: "Fabian W." <fabian(a)pedaludico.org> > To: "'The Think Tank'" <thethinktank(a)lists.bikecollectives.org> > Subject: [TheThinkTank] Bike!Bike! Los Angeles - Travel Equity > Message-ID: <00d801d41337$d0ee6380$72cb2a80$(a)pedaludico.org> > Content-Type: text/plain; charset="iso-8859-1" > > > > Hello Everyone, > > > > I?m Fabian W. and I?m a member of the Bike!Bike! 2018 ? Los Angeles > organizing committee. One of my specific tasks is to promote and facilitate > participation in our event by Mexican, Central American and South American > bike groups. > > > > There are two main components to this effort: > > > > Promote the event among groups in those regions. > > I?m already reaching out to many across the region but if you know of any > specific ones I would really appreciate the contact information. > > > > Fundraise for our travel equity program. > > Participation by south-of-the-US Border groups is very difficult because of > the cost of visas and airfare. > > Jim Mayerstein from Mexico has shared with me some important background > information about travel equity funding in previous Bike!Bike! gatherings > starting with Detroit. Jim mentioned that a couple of the collectives from > Canada were able to do significant funding towards this (Bike Sauce from > Toronto and Our Community Bikes from Vancouver). > > The Los Angeles Bike!Bike! organizing committee is going to do as much > funding for this as possible but any contributions or ideas from the rest > of > the BikeCollectives community would be very appreciated. > > > > We have started a crowd funding site at: https://bikebike2018.raisely.com/ > . > Any contributions there would help give momentum to that effort. > > > > So, please if you have any ideas or have specific resources in relationship > to both the promotion of the event south-of-the-US Border or, more > importantly, in regards to funding our southern friends please contact me > at > fabian(a)ucla.edu <mailto:fabian@ucla.edu> > > > > Looking forward to meeting many of you in LA in September, > > > > _fabian > > Bike!Bike! 2018, Los Angeles, Organizing Committee > > Professor, Department of Film, Television and Digital Media, UCLA > > Director, PedaL?dico, Buenos Aires, Argentina ( <http://pedaludico.org> > http://pedaludico.org) > > Director, cheLA, Buenos Aires, Argentina (http://chela.org.ar) > > > > > >

1 0

Bike Works in Seattle is hiring a Program Coordinator
by Deb Salls 25 Jul '18

25 Jul '18

Please Spread the word Bike Works in SE Seattle's Columbia City neighborhood is hiring a Program Coordinator to help run our youth and adult programs. This role includes teaching bike repair classes, running bike rides and safety rodeos and maintaining outreach and redistribution of bikes to the community. Each day will be a blend of thiese tasks within a team, requiring collaboration and independnce. *This is an excellent opportunity for someone with shop level mechanic skills who has youth and adult mentoring/teaching experience.* Go to our website for more about this position and info on how to apply https://bikeworks.org/about/job-opportunities/ Deb -- Deb Salls Executive Director 206-695-2607 bikeworks.org Bike Works promotes the bicycle as a vehicle for change to empower youth and build resilient communities.

1 1

Blackstone Bicycle Works is Hiring a Program Manager - Chicago's South Side youth education program and community bike shop
by Matthew Searle 25 Jul '18

25 Jul '18

Hello ThinkTank! We are hiring a Program Manager for Blackstone Bicycle Works. Please help us spread the word. We believe candidates could come from a wide variety of backgrounds and be successful in this role. See the attached job ad. More information can be found on our website here <https://experimentalstation.org/jobs>. Applications are due August 8th. See our most recent video about the program here <https://youtu.be/RACwu05L2UE>. Thanks, Matthew *Blackstone Bicycle Works *is committed to fostering a safe, holistic learning environment that empowers primarily youth of color from Chicago’s Woodlawn neighborhood and greater South Side community. Its collaborative model and staff engage 180 underserved youth annually in real world experiences such as bicycle repair, small business operation, and teaching roles, in order to break down barriers to future opportunities. The program combines STEM learning, mentoring, tutoring, and anti-violence work into one cohesive experience. Both a youth program and community bike shop, BBW is a program of Experimental Station, a nonprofit incubator of innovative educational and cultural programs, small business enterprises, and community initiatives. ______________ Matthew T. Searle Assistant Director Experimental Station 6100 S. Blackstone Ave. Chicago, IL 60637 USA matthew(a)experimentalstation.org office: 773.241.6044; alt: 773.270.2502 experimentalstation.org <http://www.experimentalstation.org>

1 0

Creating a think tank
by Tigre Bici 23 Jul '18

23 Jul '18

Hello everyone! We are interested on see how the thinktank works and how to replicate it, does anyone knows? we are trying to setup something like the bike collectives think tank with the city feminist groups but using facebook or whatssap has proven very complicated so, if you know any way on forming a thinktank or other ways of mass communication with different groups that doesn't required to be all day in front of a screen and/or saturates your inbox will be awesome. Regards R.

7 7

Organizing Small Parts Better
by Geoffrey Smart 22 Jul '18

22 Jul '18

For really small items such as bolts I like draws with the name of the bolt say M6 and a sample on the front and running the draws of each item down smallest to largest size so M$ down to M8 so volunteers get a fell after a while for the size they need. For larger parts such as brake blocks I like to see all the brake stuff or gear stuff together. We use the kind of removable boxes that clip on to a wall bracket with the name of the item on the box and on the wall where it goes. The advantage of these is that you can see in to the boxes when standing back and you can remove the box to sort item. I think if you have too many items to fit in a draw you need to cull the stuff in the worst condition or it just makes finding the good stuff harder. We get volunteers to do this with the more experienced helping the newer as a way of learning about the relative value of parts. Geoff Smart Back2Bikes Port Melbourne

1 0

Bike Kitchen (Vancouver, Canada) looking to hire Senior Mechanic
by Bike Kitchen 20 Jul '18

20 Jul '18

Hello there, The Bike Kitchen in Vancouver, BC, Canada is looking to hire a Senior Mechanic for August Please pass along to your networks and if anyone is interested in applying they can send an email to admin(a)thebikekitchen.com Thanks! -alex The Bike Kitchen 1896 East Mall, Vancouver BC (604) 827-7333 www.thebikekitchen.com The Bike Kitchen is on Facebook <https://www.facebook.com/UBCBikeKitchen/?fref=ts>!

1 0

Welding discussion
by Ulick O'Beirne 20 Jul '18

20 Jul '18

Hi guys, I've been wondering about welding. I'm an ok welder. I can get the job done. I'm ok when things are set up for me in a class setting, but haven't worked outside that; and standing in big stores trying to figure out what gear to buy really confuses me. I do have access to sheds and experienced friends who would support me; and in my community setting if I was pretty confident with setting that up I'd probably get good support (especially if I was doing something that could benefit everyone). When I stared thinking about it, there's a million questions around welding set up I'd like to ask the ThinkTank. Do you think you could help me answer these? Questions I have: -Set up and materials needed, -Hardware- i.e. buildings, power input, flooring, etc -Preferences for different materials or machines -Experience- show and tell of really good bike shop welding; especially any frames anyone has built they're proud of All much appreciated guys! Ulick Ireland

5 6

Organizing Small Parts Better
by Josh Bisker 20 Jul '18

20 Jul '18

Hey pals, what are your good ways of organizing the small parts in your shop? I don't mean "do you put them in little bitty parts drawers or bins," but more "if so, how do you organize those drawers or bins?" At the Mechanical Gardens, as the small parts get more *sorted *they also get less *organized*. It just becomes static: fifty teeny drawers of small parts or whatever means that people who don't know just what their part is called or looks like, or just where to look for it, are SOL. No bueno. Do you do something clever to head this off? Organize small parts by bike system, by commonly accessed parts versus parts-of-components (like jockey wheels, star nuts, or seatpost tops), or some other way? Someone who's worked on this, please help us. xoxoxoxoxoxoxoxox Josh Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

3 2

Literature on womens+bikes
by Tigre Bici 18 Jul '18

18 Jul '18

Hello everyone! We have been doing some research on non-academic and academic literature on how there are different types on mobility inside cities and those differences are also, or should be, gendered (not into the idea of the binomial definition of gender but the majority of info we have found approaches that way) ans also on how perceptions/infrastructure mold the mobility patrons on women and men*. Not so surprising we have found the bast majority of urban plans, bike lanes and even bike "activism" all around the globe keeps repeating the no consideration/misogynist way to do-it, the no consideration on reproductive work (that not only women do, but in bast majority the do). Sooooo, I write this email for 2 reasons: 1-Ask, if you have any, for literature that approaches mobility with a "gender perspective" that can or cannot include this on the text but, you know that doesn't keep talking of men as the norm when creating new bus lanes or bike lanes etc. 2- If anyone wants to open a support/study/awesome group to discuss this things (will be awesome), let me know! Thanks And hopefully I will see a bunch of you in LA Abrazos R.

4 4

Rags storage (new and used)
by Luis Fernandez 18 Jul '18

18 Jul '18

Hi all, Our rag storage situation could use some improvement at the Somerville Bike Kitchen in MA. Just wondering how folks are currently storing clean rags and then taking care of used rags? Is there some good, cheap, nifty way to store them so that they are easily available and take up the least amount of room and don't end up going everywhere? Really just looking for pictures or descriptions of how you folks are managing your rags... Maybe i'm over-thinking this and just a big bin works... but our space is small and we have limited floor space.. Thanks, Luis ps - I wanted to send a shout-out to the austin yellow bike project. When I was there a year or so ago, I attended one of their meetings and thought that their approach to making rags was pretty smart. At the start of the meeting, they hand out scissors and tshirts to the folks seated at the meeting and cut up rags while the meeting is going on - seemed a great way to multi-task.

2 1

child protection policy
by Ulick O'Beirne 18 Jul '18

18 Jul '18

Anyone got a child protection policy that your organisation uses that they can share? Ulick

2 1

Bike Saviours is hiring a Shop Manager
by Patrick Gilbery 18 Jul '18

18 Jul '18

Bike Saviours in Tempe, Arizona is looking for a new full-time shop manager! To apply, send a resume and cover letter to jim(a)bikesaviours.org Details are attached.

1 0

rental agreements?
by Geoff Heath 17 Jul '18

17 Jul '18

Anyone have a sample rental agreement and/or waiver they'd like to share with me so I can riff off of it? Thanks! Geoff

2 1

Community bicycle in a Shipping Container
by BikeConcord 17 Jul '18

17 Jul '18

Hi Everyone, We just started our Community Bicycle shop this year at a local high school here in Concord California. It is a work in progress as you can see. Thought I would share pictures. Best regards and Happy pedaling!! “Smitty” (S. M. Ardrey) Community Bicycle Shop Coordinator a.k.a. The Instigator (925)285-1814 BikeConcord.org Facebook: BikeConcord Bike Concord's nonprofit 501(c) 3 sponsor is Bike East Bay BikeEastBay.org

2 1

Best DIY Outdoor Repair Stations?
by Anne-Lise (co-présidente de la vélo-écol e du 20ème) 17 Jul '18

17 Jul '18

An Atelier Vélorution Bastille (Paris, France) creation. Also here : http://wiklou.org/wiki/Atelier_mobile Le 2018-07-16 22:04, thethinktank-request(a)lists.bikecollectives.org a écrit : > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. Best DIY Outdoor Repair Stations? (Aida Mas Baghaie) > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 16 Jul 2018 12:49:38 -0400 > From: Aida Mas Baghaie <aida.masb(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Subject: [TheThinkTank] Best DIY Outdoor Repair Stations? > Message-ID: > <CAN+FvGb8L9HamfKim_5HJrcyuwGJU9Am4JcBWa4+-sJFY7Vqgw(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hey y'all, > > I'm working on a collaboration between an NYC community garden and the > Mechanical Gardens Bike Co-op to start a bike repair outpost in a shipping > container. Before we get started on building the shop, we'll be making some > pedal powered gardening tools, and an outdoor repair station. *Do you have > an outdoor repair station* for open-access community use at your shop?* If > so, please send me a photo and I'll compile them into a shared folder :) > > *Just to be clear, I'm not looking for an off-the-shelf solution, but > something creative you or someone else made. I've attached a photo of the > one at Neighborhood Bike Works in Philly as a reference. > > Thanks bike buds! > > aida >

1 0

Re: [TheThinkTank] Best DIY Outdoor Repair Stations?
by Patrick Gilbery 16 Jul '18

16 Jul '18

Here's ours. Tempe is a high theft environment, so everything is welded on. We've never been able to keep a pump out there for more than two weeks (even the bike fixtation high security one). Patrick Gilbery Shop Manager Bike Saviours (602) 429-9369 On Jul 16, 2018 1:04 PM, <thethinktank-request(a)lists.bikecollectives.org> wrote: Send Thethinktank mailing list submissions to thethinktank(a)lists.bikecollectives.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.bikecollectives.org/listinfo.cgi/thethinktank- bikecollectives.org or, via email, send a message with subject or body 'help' to thethinktank-request(a)lists.bikecollectives.org You can reach the person managing the list at thethinktank-owner(a)lists.bikecollectives.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..." Today's Topics: 1. Best DIY Outdoor Repair Stations? (Aida Mas Baghaie) ---------- Forwarded message ---------- From: Aida Mas Baghaie <aida.masb(a)gmail.com> To: The Think Tank <thethinktank(a)lists.bikecollectives.org> Cc: Bcc: Date: Mon, 16 Jul 2018 12:49:38 -0400 Subject: [TheThinkTank] Best DIY Outdoor Repair Stations? Hey y'all, I'm working on a collaboration between an NYC community garden and the Mechanical Gardens Bike Co-op to start a bike repair outpost in a shipping container. Before we get started on building the shop, we'll be making some pedal powered gardening tools, and an outdoor repair station. *Do you have an outdoor repair station* for open-access community use at your shop?* If so, please send me a photo and I'll compile them into a shared folder :) *Just to be clear, I'm not looking for an off-the-shelf solution, but something creative you or someone else made. I've attached a photo of the one at Neighborhood Bike Works in Philly as a reference. Thanks bike buds! aida _______________________________________________ Thethinktank mailing list Thethinktank(a)lists.bikecollectives.org http://lists.bikecollectives.org/listinfo.cgi/thethinktank- bikecollectives.org

3 5

Best DIY Outdoor Repair Stations?
by Aida Mas Baghaie 16 Jul '18

16 Jul '18

Hey y'all, I'm working on a collaboration between an NYC community garden and the Mechanical Gardens Bike Co-op to start a bike repair outpost in a shipping container. Before we get started on building the shop, we'll be making some pedal powered gardening tools, and an outdoor repair station. *Do you have an outdoor repair station* for open-access community use at your shop?* If so, please send me a photo and I'll compile them into a shared folder :) *Just to be clear, I'm not looking for an off-the-shelf solution, but something creative you or someone else made. I've attached a photo of the one at Neighborhood Bike Works in Philly as a reference. Thanks bike buds! aida

1 0

Re: [TheThinkTank] Cycling workshop curriculums
by Parag Kapoor 11 Jul '18

11 Jul '18

Hello everyone, We’re looking for examples of bike repair workshop curriculums from the community. We’re working on designing our programming for the fall/winter at Cycle York - York University. Thanks for the help!!! Parag Kapoor

1 0

Volunteer agreements/waivers
by David Coppley 09 Jul '18

09 Jul '18

Greetings bike folks, We are revising our volunteer agreement/waiver, and I would love to see what others are using. If you have a copy of a waiver you are willing to share, please respond to this post. Anything that relates to volunteers working in shop spaces, or going on group rides with kids would be helpful. I attached a copy of our form, for anyone who might be interested. Thanks in advance, David David Coppley Walk n' Roll Program Assistant Intercity Transit 360-705-5817 (office) 360-701-8379 (cell) PO Box 659 Olympia, WA 98501 dcoppley(a)intercitytransit.com<mailto:dcoppley@intercitytransit.com> Find us on Facebook!<https://www.facebook.com/BicycleCommuterContest> [WalkNRoll_HZ_RGB]

3 2

Re: [TheThinkTank] New Bicycle Co-op at York University
by Parag Kapoor 07 Jul '18

07 Jul '18

This is incredible, thank you everyone, I’m linking the photos from a google drive folder here! https://drive.google.com/open?id=1--zdXwISAxbn0NFMdTRNIf_6IxIFNcQu Parag Kapoor ________________________________ From: 30422403300n behalf of Sent: Friday, July 6, 2018 4:05 PM To: thethinktank(a)lists.bikecollectives.org Subject: Thethinktank Digest, Vol 142, Issue 5 Send Thethinktank mailing list submissions to thethinktank(a)lists.bikecollectives.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… or, via email, send a message with subject or body 'help' to thethinktank-request(a)lists.bikecollectives.org You can reach the person managing the list at thethinktank-owner(a)lists.bikecollectives.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..."

2 1

Posters and resources on gender equity in the shop
by LaBikery 07 Jul '18

07 Jul '18

Hello! I work at a community bike coop in Moncton, New Brunswick. We are looking at visually impactful ways of addressing subtle gender bias in our shop. I am sure we are not the only shop that has to work on conveying women's equal competence to the general public in a bike shop setting! Does anyone have any posters, simply-written policies, or ideas? Thank you! Jennifer *Coopérative La Bikery Co-operative* *Centre de vélo communautaire * *Community Bicycle Centre* *120 boul. Assomption blvd,* * Moncton NB* Rental hours/DIY shop hours//Location de vélos/atelier libre: Wed – Sun 10am – 6pm/Mercredi – Dimanche 10 h à 18 h <http://labikery.ca/> <https://www.facebook.com/LaBikery> <https://twitter.com/LaBikery> *CHECK US OUT BY CLICKING ON THE LINKS ABOVE*

2 1

Greetings from Iowa City!
by Anne Duggan 07 Jul '18

07 Jul '18

Hello, friends, I just thought I’d share this article about the Bike Library that was published in our local media. None of us can make it to Bike!Bike! this year—we’ll be thinking about you! Try not to have too much fun without us! https://littlevillagemag.com/one-more-crazy-iowa-city-idea-inside-the-bike-… Happy trails! Anne Duggan Board Member and Program Volunteer Sent from my iPad

2 1

Re: [TheThinkTank] New bicycle co-operative at York University
by Parag Kapoor 06 Jul '18

06 Jul '18

Hello all, We're close to launching a new bicycle co-operative at York University, Toronto, ON, Canada! I had some requests to ask the community: 1. I would like to connect with the managers of other University/college campus based bicycle co-ops to discuss practices and business models, go over past decisions made to get to where they are now. 2. Are there any tool bench designs that are favorites? I really like the tool benches @ Charlie's in Toronto, but would like to see other examples of well thought out tool benches. 3. Could we look at examples of shop layouts? Has any co-operative made a floor-map with the furnishings placement on it? We have plans as well to share! 3. Do creature comforts matter? I wanted to be double sure. Normally I would not hesitate myself to say A/C is definitely not needed at first, but for context we are moving from a hidden closet in terms of operations into a 1500+ sq ft. new storefront. We have big glass windows that face east, which means that by 10 am the place is a broiler. Installing an A/C system feels like the right thing to do.... As well I have a whole bunch of photos of our space and shop logo to share to anyone interested! Best, Parag

6 5

Bike Collective VS. Simply giving away bikes
by Sylvie Baele 05 Jul '18

05 Jul '18

Alright friends, I am reaching out for some resources.. I have a meeting soon with a guy who has an organization which gives away bikes. "Second Chance Bikes" Now, I don't disagree with giving people bikes... but I think the bike collective model (like earn-a-bike) is more empowering and sustainable long-term. And of course encourages safer riding, all while building community... Got any resources (or data) that can help support my/our position? I am a bit nervous as my meeting is with an older white male and I'm a younger female. He's already mansplained me once before. Bikes! Sylvie Baele *"I am more and more convinced that our happiness or unhappiness depends more on the way we meet the events of life than on the nature of those events themselves." - Alexander von Humbolt*

11 12

Recycle Ithaca's Bicycles has an open position: Educator Mechanic
by Cyclista Nicholas 05 Jul '18

05 Jul '18

I am super excited to post to this list that Recycle Ithaca's Bicycles, based in Ithaca, New York, is hiring for a new part time position! I expect it won't be enough hours to persuade people to move from say, Beijing or Barcelona, but maybe Montreal or Syracuse ;) And who knows - maybe we'll find out someone nearer to our town has been lurking on this list all along. About RIBs: Recycle Ithaca's Bicycles is a thirty year-old program of the Southside Community center focused on a facilitated free and open shop model. We do require a donation for parts, which is pay-what-you-want. Our focus is on empowerment, via skill building, confidence building and access to transportation. We serve an extremely wide array of people in our local population, from people in the reentry process from incarceration, college students pursuing PHDs, local homeless, families of all social classes, and immigrants. About The Southside Community Center: Established in 1938, the SsCC is one of the nation's oldest African American community organizations, tracing its roots back to the efforts of a small women's club 1927. Since it's founding, it has nurtured a variety of programs designed to "affirm, empower, and foster the development of self pride among the African-American citizens of greater Ithaca..." About Ithaca: Home to four higher education institutions including Cornell University, Ithaca has a resilient cycling community and a long tradition of political and social awareness. ----------------------------------------------------------------------------------------------------- Position Title: Educator Mechanic, Recycle Ithaca's Bicycles Reporting To: Nydia Blas, Executive Director, Southside Community Center, Nicholas Desystemizer, Director, Recycle Ithaca's Bicycles Compensation: $15.11/hour, 15 hours/week Benefits: paid vacation and sick leave Recycle Ithaca’s Bicycles is a program of the Southside Community Center and a skillsharing community bicycle workshop where anyone can come in and work on their bikes, whether to repair, build, or simply maintain, free of cost (except parts). For almost thirty years, RIBs has been a fun and empowering space where people learn and help one another while connecting with liberating and sustainable technology. This position is seasonal, ending October 31, with the possibility for scaled back hours over Winter. In season, it will be 15hrs/week(a)$15.11/hr, Saturday and Sunday from 12:30pm until 5:30pm, and Thursday 6pm-close. The position will be completely responsible for Thursdays, but will share the day with the Director from 2pm-5:30pm on Saturday and Sunday. The position may require attending weekly hour-long staff meetings, paid at the normal rate. The applicant does not have to be mechanically proficient at the time of interview, but they do need to have a passion for learning mechanical skills such that they will eventually develop professional skills. This position offers training which will precede assumption of regular hours, and will consist of shadowing by the Director and Consulting Director on Tuesdays, Thursdays, and Saturdays. Other days necessary for training may be possible. All training will be paid at the working rate. The primary skill the applicant must demonstrate at the time of interview is the ability to work with people in an encouraging, patient, positive, tolerant, and educational capacity while maintaining awareness of all projects and people in the space. Ability to confront and resolve conflict in a graceful and healthy manner (as far as possible) is also necessary. Acceptance of and interest in human diversity is essential. People with experience maintaining cohesion, balance, positivity, and strength in highly populated communities are encouraged to apply. Duty is to facilitate open shop hours as follows: -Maintain an organized space -Facilitate workflows and ongoing projects -Maintain awareness of multiple participants, their situations, and their projects -Teach repair skills to participants -Ensure the proper use of tools and space to minimize breakage, wear, and damage -Cultivate quality for all new and used bikes and hardware leaving the shop -Monitor and enforce safety standards for bikes leaving the shop -Greet and orient new participants -Coordinate volunteers -Process bike donations -Collect and secure monetary donations -Perform necessary record keeping and reporting for all participants and (if closing) monetary streams -Maintain RIBs as as a safer and anti-oppressive space -Observe and apply in practice the mission statements of RIBs and SsCC -Assist the Director and Consulting Director as needed This position must be filled as soon as possible, and therefore candidates will be interviewed in the order they apply until the position has been filled. Please respond with a cover letter and brief resume. No specific format is required for the resume, content has priority. Send application to: cyclista.ribs(a)sspride.org or drop off in person at 305 S. Plain Street, weekdays 10am-7pm. Thank you very much for your interest in this position. We look forward to meeting you! -----------------------------------------------------------------------------------------------------

1 0

Bike!Bike! Los Angeles - Travel Equity
by Fabian W. 03 Jul '18

03 Jul '18

Hello Everyone, Im Fabian W. and Im a member of the Bike!Bike! 2018 Los Angeles organizing committee. One of my specific tasks is to promote and facilitate participation in our event by Mexican, Central American and South American bike groups. There are two main components to this effort: Promote the event among groups in those regions. Im already reaching out to many across the region but if you know of any specific ones I would really appreciate the contact information. Fundraise for our travel equity program. Participation by south-of-the-US Border groups is very difficult because of the cost of visas and airfare. Jim Mayerstein from Mexico has shared with me some important background information about travel equity funding in previous Bike!Bike! gatherings starting with Detroit. Jim mentioned that a couple of the collectives from Canada were able to do significant funding towards this (Bike Sauce from Toronto and Our Community Bikes from Vancouver). The Los Angeles Bike!Bike! organizing committee is going to do as much funding for this as possible but any contributions or ideas from the rest of the BikeCollectives community would be very appreciated. We have started a crowd funding site at: https://bikebike2018.raisely.com/ . Any contributions there would help give momentum to that effort. So, please if you have any ideas or have specific resources in relationship to both the promotion of the event south-of-the-US Border or, more importantly, in regards to funding our southern friends please contact me at fabian(a)ucla.edu <mailto:fabian@ucla.edu> Looking forward to meeting many of you in LA in September, _fabian Bike!Bike! 2018, Los Angeles, Organizing Committee Professor, Department of Film, Television and Digital Media, UCLA Director, PedaLúdico, Buenos Aires, Argentina ( <http://pedaludico.org> http://pedaludico.org) Director, cheLA, Buenos Aires, Argentina (http://chela.org.ar)

1 0

Re: [TheThinkTank] Bike Collective VS. Simply giving away bikes
by Bonnie Anderson 03 Jul '18

03 Jul '18

Well said, Matt! We function much the same as you described, and the community has responded in the positive. Bonnie Bonnie Anderson Founding Director BF Community Bike Project 30 Henry St., Bellows Falls, VT 05101 (802) 310-8867 bfbike.org / visit us on facebook <https://www.facebook.com/BF-Community-Bike-Project-514155548620492/> On Mon, Jul 2, 2018 at 9:25 PM, Matt VanSlyke <matt(a)uticabikerescue.org> wrote: > Hi Sylvie, > We are also in a situation where there is a local giveaway that we are > frequently confused with. They have been around for about 10 years and we > have been operating for 5. They have a bigger marketing budget and use it > to promote their 1-day, 1,000-bike hand out. We operate year round and > spend as much time as needed to help people get bikes. That means we > redistribute fewer bikes but we feel we deliver a better service. > > Although it's a tired cliche (which I acknowledge in conversation) people > who ask "do you give away bikes?" always understand when I say that we > follow more or less a "teach a person to fish" approach. They also > understand when I explain why we sell bikes in addition to offering > earn-a-bike. I tell them that we believe everyone should have some skin in > the game and therefore it would be incongruous to our mission if we asked > for handouts form organizations. We do enjoy and appreciate the financial > support we've received on a few occasions from grantmaking organizations > but we rely on revenue that we generate through hardwork, just like we ask > our customers to do. > > I've had this conversation enough times now that I have it polished pretty > well. I can't recall a single instance where someone has left the > conversation feeling as if we're doing it wrong, in fact it's usually an > eye-opening experience for them. My theory on why this is the case is > because I think many people out there are still unfamiliar with the social > enterprise concept and seem to still think that non-profit means "no > money". > > I applaud the passion and caring of the many bike giveaway programs out > there. I know several of them that do excellent refurbishing and provide > free bikes to people who truly need and appreciate them. My experience > locally has been different and that's why we stick to our guns. > > I hope this helps. I'm willing to chat more on the phone if you'd like. > Feel free to call me if you want. > > -Matt > > *Matt VanSlyke* > Executive Director > 315.525.9554 | matt(a)uticabikerescue.orgwww.UticaBikeRescue.org > <http://facebook.com/uticabikerescue> > <http://instagram.com/uticabikerescue> > > > > On Mon, Jul 2, 2018 at 2:04 PM, Paul Fitzgerald <paul(a)workingbikes.org> > wrote: > >> Sylvie and all, >> >> I don't believe I understand the nature of your meeting. Are you >> attempting to steer the "Second Change" mission or figuring out some type >> of strategic partnership with a different org? >> >> I would like to solicit more opinions or discussion on the 'earn-a-bike' >> model, though. I've worked for and with organizations which heavily used >> it, particularly in working with young people. I've been at Working Bikes >> for about 8 years now, and while we invite all community members to >> volunteer and earn timeshare 'credits' towards parts for their bike, we >> also give away more than 1,000 bikes a year locally through our Cycle of >> Power and Cycle of Peace programs. We've used these donations to make >> powerful partnerships with many different types of organizations, many of >> which do not use bicycles as a primary focus of their mission. Adult >> recipients are invited to volunteer or pay a 'co-pay' or $20 towards the >> bike, helmet and lock we provide, but most decline. >> >> At a certain point, it may be a question of volume, it feels >> paternalistic to me to tell someone they have to "earn" a resource an >> organization has the ability to redistribute. I take the question of >> service vs. charity seriously, but I also believe in the radical >> redistribution of resources. I don't think it is sustainable for everyone >> who would benefit from a service to have to learn how that service operates >> to receive it. There definitely are strong arguments for earn-a-bike, as >> well as super "CHARITY" <http://fb4k.org/> bike orgs starting up. >> >> I've been pondering this discussion as a possible B!B! workshop or >> roundtable of sorts. I hope you don't feel I've hijacked your thread with >> hypotheticals, Sylvie, and wish you luck with your meeting. >> >> peace n bike grease, >> Paul >> >> On Mon, Jul 2, 2018 at 11:58 AM, Therese Kilpatrick < >> therese(a)projectbiketech.org> wrote: >> >>> Hi Sylvie, >>> I don't know your specific circumstances but perhaps your group can >>> coexist with this gentleman's targeting different recipients. If the >>> earn-a-bike model is what you want to invest in with your time and >>> resources and someone else is "giving away" bikes - how do they pay for the >>> parts/consumables necessary to restore bikes? Are they also working in a >>> non-profit or are they paying for everything themselves? Could they be >>> brought into your model if it were explained how there is more than a bike >>> that is being "given". I hope that he will be able to listen to why the >>> earn-a-bike model has much more social impact through teaching and the >>> recipients "owning" the bike through work and how it is a shared >>> experience. There is also the parable of giving fish versus teaching >>> someone how to fish... >>> Good luck and let me know how it went, >>> Therese Kilpatrick >>> Project Bike Tech Teacher - Aptos High School >>> >>> >>> On Mon, Jul 2, 2018 at 8:13 AM, Sylvie Baele <sylvgrb(a)gmail.com> wrote: >>> >>>> Alright friends, I am reaching out for some resources.. I have a >>>> meeting soon with a guy who has an organization which gives away bikes. >>>> "Second Chance Bikes" >>>> >>>> Now, I don't disagree with giving people bikes... but I think the bike >>>> collective model (like earn-a-bike) is more empowering and sustainable >>>> long-term. And of course encourages safer riding, all while building >>>> community... >>>> >>>> Got any resources (or data) that can help support my/our position? I >>>> am a bit nervous as my meeting is with an older white male and I'm a >>>> younger female. He's already mansplained me once before. >>>> >>>> Bikes! >>>> >>>> >>>> Sylvie Baele >>>> >>>> *"I am more and more convinced that our happiness or unhappiness >>>> depends more on the way we meet the events of life than on the nature of >>>> those events themselves." - Alexander von Humbolt* >>>> >>>> ____________________________________ >>>> >>>> The ThinkTank mailing List >>>> >>>> Unsubscribe from this list here: http://lists.bikecollectives.o >>>> rg/options.cgi/thethinktank-bikecollectives.org >>>> >>>> >>>> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> >> -- >> Paul Fitzgerald >> General Manager, Working Bikes >> Pronouns <https://uwm.edu/lgbtrc/support/gender-pronouns/>: him, his, he >> 2434 S. Western, Chicago, IL 60608 >> 773-847-5440 >> ------------------------------------------------------------ >> ------------------------------------------------- >> Store Hours: Wed, Thurs, Fri- 11am-7pm >> Sat - 10am-6pm >> Sun - 11am-4pm >> >> >> Volunteer Hours: Tues- 5-9pm >> Wed- 12-5pm >> Sat- 12-5pm >> >> WTF! Night is every Thursday 5-9pm. It is a volunteer mechanics night >> exclusively for Women and people who are Transgendered or Gender >> Non-Conforming. >> >> “El socialismo puede llegar solo en la bicicleta." >> >> "Socialism can only arrive by bicycle." >> >> -José Antonio Viera Gallo, Assistant Secretary of Justice in the >> government of Salvador Allende >> >> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. > www.avast.com > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> > <#m_-2661727874550885743_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > >

1 0

(no subject)
by Angelo Coletta 21 Jun '18

21 Jun '18

http://refer.themillenniummile.com Angelo Coletta

1 0

(no subject)
by Angelo Coletta 21 Jun '18

21 Jun '18

http://matter.ldesignchicago.com Angelo Coletta

1 0

Memorial bicycles. The ghost bike
by Geoffrey Bercarich 18 Jun '18

18 Jun '18

Hello people of bike bike land. I ask all who proforma memorials for cyclists to contact me directly. I am wishing to create a coalition of people and organizations responsible for cycling memorials. Our work is important and is changing the way people see cycling in our communities. We need eachother to help better deliver our memorials. Please help me and get in touch with me. Geoffrey Bercarich Advocacy for respect for cyclists Toronto Canada.

3 2

Wheel management
by Jack Murphy 13 Jun '18

13 Jun '18

We have a lot of wheels on hand, some ready to go, others needing bearings or truing, and still others piled up. We hang some from ceiling using hooks, and have tried a rack to hold them. The problem comes when people just set wheels on the floor in front of the rack, or pile them in. We need to find an efficient way to store them. I'm leaning towards more hooks, but wonder what others do to manage wheel inventory. -- Jack Murphy Jack(a)BikeWalkWichita.org *Bike Walk Wichita’s Mission is to transform Wichita into a more livable, accessible, * *connected city **by making biking and walking safe, equitable, and appealing.*

4 4

Re: [TheThinkTank] Thethinktank Digest, Vol 141, Issue 4
by Lawrence Mohammed 12 Jun '18

12 Jun '18

We're in the UK, slightly different rules, but ensure any bikes sold have working bell, wheel reflectors (clear or orange), white front reflector and red rear reflector. No need for this but it's what you'd expect from a new bike and we do it for best practise. During popups where we check peoples bikes, we not whether they have these too...pointing out why they're added to new bikes, though not demanding they go get them fitted (by us or anyone else) if absent. Warmest regards, *Lawrence Mohammed* Director & Head Mechanic Pro Bike Service C.I.C. *+44 (0)77 222 58587* *probikeservice.co.uk <https://probikeservice.co.uk>* *facebook.com/probikeservice <https://www.facebook.com/professionalbikeservice>* /[Location, NOT delivery address] Pro Bike Service C.I.C. Multi-Storey Car Park Lesney Avenue Olympic Park London E20 3BS / On 12/06/18 21:04, thethinktank-request(a)lists.bikecollectives.org wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > > Today's Topics: > > 1. policy for reflectors? (Ann Haebig) > 2. Re: policy for reflectors? (David Oliver) > 3. Re: policy for reflectors? (Edward Stewart) > 4. Wheel management (Jack Murphy) > 5. Re: policy for reflectors? (Jim Sheehan) > 6. Re: policy for reflectors? (David Oliver) > 7. Re: Wheel management (Eric Brozell) > 8. Re: Wheel management (Jack Murphy) > 9. Re: policy for reflectors? (Todd Spinner) > 10. Re: policy for reflectors? (Shannon Southwood) > 11. Re: Wheel management (General Manager) > 12. Re: policy for reflectors? (Daniel Silverman) > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.…

1 0

policy for reflectors?
by Ann Haebig 12 Jun '18

12 Jun '18

Hi all, I'm new to the Think Tank, though I've been around bike coops and advocacy for years. I searched the archives but didn't find anything relevant to my question... Do any of you have a policy about whether and which reflectors (or lights) must be installed on a bike that leaves your shop? Has your coop had a discussion about it? I'd like to hear from those groups who've considered the question, to provide input for our own discussion on it. Thanks in advance! -Ann

7 7

Re: [TheThinkTank] Thethinktank Digest, Vol 141, Issue 2
by Tegan Moss 06 Jun '18

06 Jun '18

The bikecollectives.org wiki has detailed info about running a successful bike drive be sure to read over it if you are planning one! On Tue, Jun 5, 2018, 4:04 PM , < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > Today's Topics: > > 1. Bike Drive! (Joe Spelde) > 2. Re: Bike Drive! (Ulick O'Beirne) > 3. Re: Bike Drive! (Karen Overton) > 4. Re: Bike Drive! (Eric Brozell) > > > > ---------- Forwarded message ---------- > From: Joe Spelde <jspelde(a)bgch.org> > To: "thethinktank(a)lists.bikecollectives.org" < > thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 5 Jun 2018 02:15:37 +0000 > Subject: [TheThinkTank] Bike Drive! > > Hey all, > > I'm launching an earn-a-bike program at the Boys and Girls Club > of Holland, and we are looking to host a bike drive to help us get enough > bikes for the kids. I just wanted to reach out and ask if anyone has any > advice or knowledge on running a successful bike drive. > > Also, i'd appreciate any other insight regarding earn-a-bike > programs..I've mostly looked at "Tools for Life" as a guide thus far. > > Thanks! > > > Joe Spelde > > Teen Program Assistant > > Boys and Girls Club of Holland > > e-mail: jspelde(a)bgch.org > > phone: (616) 392-4102 x 119 > > > > > ---------- Forwarded message ---------- > From: "Ulick O'Beirne" <ulickobeirne(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 5 Jun 2018 12:25:41 +0100 > Subject: Re: [TheThinkTank] Bike Drive! > That's great. we're in a similar position. I found getting a piece in the > local paper really worked (we got 40 bikes very quickly); also connecting > to local cycling clubs who may have old bikes (these guys usually know the > difference between rubbish and useful too). Faacebook and small videos are > good. As are public wish lists in community spaces. > > In the past I've found the worst thing to be poor quality bikes getting > dropped off (even ones that are only fit for recycling), which are often of > very little value, and take more time to process. I saw one community bike > shop asks for a €10/$10 donation with each bike donated to help with its > being refurbished. This weeds out the dumpers and the money will come in > handy. And then I found that people with genuine good bikes who can't > afford the donation will come find you anyway. > > hope that's of some help. Ulick > > On 5 June 2018 at 03:15, Joe Spelde <jspelde(a)bgch.org> wrote: > >> Hey all, >> >> I'm launching an earn-a-bike program at the Boys and Girls Club >> of Holland, and we are looking to host a bike drive to help us get enough >> bikes for the kids. I just wanted to reach out and ask if anyone has any >> advice or knowledge on running a successful bike drive. >> >> Also, i'd appreciate any other insight regarding earn-a-bike >> programs..I've mostly looked at "Tools for Life" as a guide thus far. >> >> Thanks! >> >> >> Joe Spelde >> >> Teen Program Assistant >> >> Boys and Girls Club of Holland >> >> e-mail: jspelde(a)bgch.org >> >> phone: (616) 392-4102 x 119 >> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: >> http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.o… >> >> >> > > > > ---------- Forwarded message ---------- > From: Karen Overton <director(a)recycleabicycle.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 5 Jun 2018 07:50:42 -0400 > Subject: Re: [TheThinkTank] Bike Drive! > Check with your local sanitation agency. They may have a listing of places > to donate items rather than throw them away. You may also want to connect > with a sympathetic business and ask them to do a collection. Outdoor > companies, tech companies are always eager to help in NYC. Otherwise, it > just might be someone from a cycling club that champions a collection in > their company. > > Karen > > On Tue, Jun 5, 2018 at 7:25 AM, Ulick O'Beirne <ulickobeirne(a)gmail.com> > wrote: > >> That's great. we're in a similar position. I found getting a piece in the >> local paper really worked (we got 40 bikes very quickly); also connecting >> to local cycling clubs who may have old bikes (these guys usually know the >> difference between rubbish and useful too). Faacebook and small videos are >> good. As are public wish lists in community spaces. >> >> In the past I've found the worst thing to be poor quality bikes getting >> dropped off (even ones that are only fit for recycling), which are often of >> very little value, and take more time to process. I saw one community bike >> shop asks for a €10/$10 donation with each bike donated to help with its >> being refurbished. This weeds out the dumpers and the money will come in >> handy. And then I found that people with genuine good bikes who can't >> afford the donation will come find you anyway. >> >> hope that's of some help. Ulick >> >> On 5 June 2018 at 03:15, Joe Spelde <jspelde(a)bgch.org> wrote: >> >>> Hey all, >>> >>> I'm launching an earn-a-bike program at the Boys and Girls Club >>> of Holland, and we are looking to host a bike drive to help us get enough >>> bikes for the kids. I just wanted to reach out and ask if anyone has any >>> advice or knowledge on running a successful bike drive. >>> >>> Also, i'd appreciate any other insight regarding earn-a-bike >>> programs..I've mostly looked at "Tools for Life" as a guide thus far. >>> >>> Thanks! >>> >>> >>> Joe Spelde >>> >>> Teen Program Assistant >>> >>> Boys and Girls Club of Holland >>> >>> e-mail: jspelde(a)bgch.org >>> >>> phone: (616) 392-4102 x 119 >>> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: >>> http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.o… >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: >> http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.o… >> >> >> > > > > ---------- Forwarded message ---------- > From: Eric Brozell <eric(a)bikeerie.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 5 Jun 2018 14:12:07 -0400 > Subject: Re: [TheThinkTank] Bike Drive! > Joe, > > One other place that we get donor bikes from is the local police > departments. They are more than happy to help us out and usually deliver > them to our shop. There can be a lot of junk bikes in there too. The junk > bikes we part out and discard to a pile to be recycled. We also have some > artists that request bike parts for upcycle projects. > > Eventually, the word gets out about your program and people are pretty > happy to see their cast off bikes going to a good cause. So, social media > can help your efforts too. > > Eric Brozell > Bike Erie > Pedal Mettle Erie > > > On Jun 5, 2018, at 7:50 AM, Karen Overton <director(a)recycleabicycle.org> > wrote: > > Check with your local sanitation agency. They may have a listing of places > to donate items rather than throw them away. You may also want to connect > with a sympathetic business and ask them to do a collection. Outdoor > companies, tech companies are always eager to help in NYC. Otherwise, it > just might be someone from a cycling club that champions a collection in > their company. > > Karen > > On Tue, Jun 5, 2018 at 7:25 AM, Ulick O'Beirne <ulickobeirne(a)gmail.com> > wrote: > >> That's great. we're in a similar position. I found getting a piece in the >> local paper really worked (we got 40 bikes very quickly); also connecting >> to local cycling clubs who may have old bikes (these guys usually know the >> difference between rubbish and useful too). Faacebook and small videos are >> good. As are public wish lists in community spaces. >> >> In the past I've found the worst thing to be poor quality bikes getting >> dropped off (even ones that are only fit for recycling), which are often of >> very little value, and take more time to process. I saw one community bike >> shop asks for a €10/$10 donation with each bike donated to help with its >> being refurbished. This weeds out the dumpers and the money will come in >> handy. And then I found that people with genuine good bikes who can't >> afford the donation will come find you anyway. >> >> hope that's of some help. Ulick >> >> On 5 June 2018 at 03:15, Joe Spelde <jspelde(a)bgch.org> wrote: >> >>> Hey all, >>> >>> I'm launching an earn-a-bike program at the Boys and Girls Club >>> of Holland, and we are looking to host a bike drive to help us get enough >>> bikes for the kids. I just wanted to reach out and ask if anyone has any >>> advice or knowledge on running a successful bike drive. >>> >>> Also, i'd appreciate any other insight regarding earn-a-bike >>> programs..I've mostly looked at "Tools for Life" as a guide thus far. >>> >>> Thanks! >>> >>> >>> >>> Joe Spelde >>> Teen Program Assistant >>> Boys and Girls Club of Holland >>> e-mail: jspelde(a)bgch.org >>> phone: (616) 392-4102 x 119 >>> >>> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: >>> http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.o… >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: >> http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.o… >> >> >> > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: > http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.o… > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… >

1 0

Bike Drive!
by Joe Spelde 05 Jun '18

05 Jun '18

Hey all, I'm launching an earn-a-bike program at the Boys and Girls Club of Holland, and we are looking to host a bike drive to help us get enough bikes for the kids. I just wanted to reach out and ask if anyone has any advice or knowledge on running a successful bike drive. Also, i'd appreciate any other insight regarding earn-a-bike programs..I've mostly looked at "Tools for Life" as a guide thus far. Thanks! Joe Spelde Teen Program Assistant Boys and Girls Club of Holland e-mail: jspelde(a)bgch.org<mailto:jspelde@bgch.org> phone: (616) 392-4102 x 119

4 3

Bike!Bike! organizers on the radio? Sign up!
by Sunny Nestler 01 Jun '18

01 Jun '18

Hey everyone! I'm working on the AMS Bike Co-op's 2nd episode of Tire Pop! <http://www.citr.ca/radio/tire-pop/>, the radio show where we talk bikes and spin cassettes. But tbr the cassettes we spin have mostly all been converted to digital for better or worse 😵 Is anyone available next week to chat on the phone about being a Bike!Bike! organizer of the past? I would also love to chat with an organizer for this year's conference in LA if anyone is down! Lemme know and I'll email you privately to set something up. You can also email me privately if you prefer - programs(a)bikecoop.ca. Ideally we can talk next Weds 2-4 or Fri 1-3 PST. I will send questions ahead of time :) We haven't set up an archive yet but I will send another email as soon as we do so you can listen to the first episode if you missed it! x sunny *Sunny Nestler*, *Programs Manager* AMS Bike Co-op University of British Columbia 604-822-2453 | bikecoop.ca | @ubcbike

4 5

eaa
by champoyhate＠gmail.com 29 May '18

29 May '18

Sent from "the most popular high tech gadget in the progress trap"

1 0

Puns about bikes
by Ulick O'Beirne 23 May '18

23 May '18

Hey guys, Thanks so much for all the great info and ideas I've been harvesting so much from everyone's contributions to these threads. We're running a workshop around positive consent during our bicycle festival which we want to be fun and accessible: i.e. not preachy or confessional. We had thought that we'd do a couple of mechanical skills: puncture repair and wheel truing in the space; but couple this with some discussion around consent. But it needs to be safe for people who are there. We're bike mechanics, not therapists. So had thought of a game involving bike puns (spinning out, going for a ride, whatever). So can you share your best bike pun? I'd love some more to add to my collection, so that they might be incorporated into a workshop. Ulick

4 4

Bike Coops and Consignment.
by Jimmy Hallyburton 12 May '18

12 May '18

Has anyone looked into selling bicycles consignment at their shops? Or looked into it? I'd love to hear what successes, issues, pitfalls, and/or barriers people have ran into. We're brainstorming some ideas that would allow members (BBP has a yearly membership program that gives folks unlimited shop time for a year) to sell bicycles consignment through BBP. Ride On! Jimmy Hallyburton Founder / Executive Director Boise Bicycle Project (208)-429-6520 1027 Lusk St Boise, ID 83706 www.boisebicycleproject.org Explore some of the BBP Journey in my TEDx Talk on Moving at the Speed of Discovery <https://youtu.be/yDubr-RjlCE?t=6s>!

4 3

Re: [TheThinkTank] Thethinktank Digest, Vol 140, Issue 9
by Tegan Moss [B!KE] 11 May '18

11 May '18

Here is our policy. It works quite well. Best, Tegan On Fri, May 11, 2018 at 4:04 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. Bike Coops and Consignment. (Jimmy Hallyburton) > 2. Re: Bike Coops and Consignment. (Jim Sheehan) > > > ---------- Forwarded message ---------- > From: Jimmy Hallyburton <jimmy(a)boisebicycleproject.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Thu, 10 May 2018 17:41:23 -0600 > Subject: [TheThinkTank] Bike Coops and Consignment. > Has anyone looked into selling bicycles consignment at their shops? Or > looked into it? > > I'd love to hear what successes, issues, pitfalls, and/or barriers people > have ran into. > > We're brainstorming some ideas that would allow members (BBP has a yearly > membership program that gives folks unlimited shop time for a year) to sell > bicycles consignment through BBP. > > Ride On! > > Jimmy Hallyburton > Founder / Executive Director > Boise Bicycle Project > (208)-429-6520 > 1027 Lusk St Boise, ID 83706 > www.boisebicycleproject.org > > > > Explore some of the BBP Journey in my TEDx Talk on Moving at the Speed of > Discovery <https://youtu.be/yDubr-RjlCE?t=6s>! > > > ---------- Forwarded message ---------- > From: Jim Sheehan <jim(a)ohiocitycycles.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Fri, 11 May 2018 12:21:57 -0400 > Subject: Re: [TheThinkTank] Bike Coops and Consignment. > This activity may not be kosher for 501c3 orgs. We had to take down a > simple "for sale/wanted" webpage when we applied for IRS nonprofit > determination because "the assets or income of the 501c3 cannot accrue to > any individual." > > On the other hand (and why I opened this post) we are VERY interested in > others' experiences selling OUR bikes at for-profit bike shops that we > partner with (they give us their useful take-off parts, and bikes donated > by their customers)... > > Jim Sheehan > Executive Director > Ohio City Bicycle Co-op > 1840 Columbus Rd > Cleveland, Ohio 44113 > 216 830 2667 > OhioCityCycles.org > jim(a)ohiocitycycles.org > > > On Thu, May 10, 2018 at 7:41 PM, Jimmy Hallyburton < > jimmy(a)boisebicycleproject.org> wrote: > >> Has anyone looked into selling bicycles consignment at their shops? Or >> looked into it? >> >> I'd love to hear what successes, issues, pitfalls, and/or barriers people >> have ran into. >> >> We're brainstorming some ideas that would allow members (BBP has a yearly >> membership program that gives folks unlimited shop time for a year) to sell >> bicycles consignment through BBP. >> >> Ride On! >> >> Jimmy Hallyburton >> Founder / Executive Director >> Boise Bicycle Project >> (208)-429-6520 >> 1027 Lusk St Boise, ID 83706 >> www.boisebicycleproject.org >> >> >> >> Explore some of the BBP Journey in my TEDx Talk on Moving at the Speed >> of Discovery <https://youtu.be/yDubr-RjlCE?t=6s>! >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > -- B!KE: The Peterborough Community Bike Shop 293 George St, Peterborough ON (705) 775-7227 communitybikeshop.org

1 0

Re workshop layout
by Geoffrey Smart 08 May '18

08 May '18

Hi Ulick I accidentally marked the video private due to this being my first Youtube attempt.. It is now public so the link should work as it clicked through for me on another persons phone. Regards Geoff

1 0

Re workshop layout
by Geoffrey Smart 08 May '18

08 May '18

Hi All, Someone asking for hints on setting up a workshop has prompted me to post this video on youtube.https://youtu.be/ioiEZ7pot-E <https://youtu.be/ioiEZ7pot-E> It is both the story of how we moved although once I shot it on the phone I realised I had not remembered everything and bikes are my thing not videos. But more particularly it is a thank you to all the people from community bike shops around the globe who emailed me with hints that we could use when moving, I hope this helps Ulick and anyone else who intends moving. As we moved last October it is still fresh in my memory. Some things I did not mention in the video and for which we received as hints :- If possible put in insulation, lights ceiling fans ( the flickering in the video) and power points before moving in as it is really difficult to retrofit. Buy the best work stands you can afford. If you are falling behind schedule, your volunteers are flagging and if you have the funds use tradesmen to complete difficult technical tasks. There is nothing worse than clients and volunteers coming to a closed workshop. We closed for one day and had every volunteer and friend help us move that day. The rest of the time we split our volunteers in to 2 groups. The moving group and those who continued to work on bikes. Signs and labels everywhere to make it easy for newcomers. Many people are embarrassed to always be asking where items are situated and labels enable volunteers to learn the name of parts and tools themselves. Finally use your volunteers non- bicycle skills, One of ours is an architect who laid out the space, another who was a demolition guy helped to bring down walls safely and those with welding skills helped with the racks. Thanks again to you all Geoff Smart

2 1

test new subscriber
by Jim Bledsoe 07 May '18

07 May '18

hey everybody

1 0

Bike Church seeks collective member
by Bike Church Santa Cruz 07 May '18

07 May '18

Hi all, We've got an opening for a mechanic/collective member. Detail are on our website. Thanks! Elaine -- Come check us out: Monday 1-7 Tuesday 1-7 Wednesday 1-7 Thursday 1-7 Friday CLOSED Saturday 12-5 Womyn, Trans, and Femme Workshop. 1st and 3rd Sunday 12-3 The Bike Church 703 Pacific Avenue Santa Cruz, CA 95060 831/425-BIKE bikechurch(a)santacruzhub.org <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

1 0

Are any of your orgs. tied to other community-building initiatives?
by Sue Plummer 06 May '18

06 May '18

Here's a wild hair of a question, perhaps: Do any of you operate in conjunction with another effort/cause/concept? Our neighborhood is a food desert as of March 2017, a historically diverse neighborhood, and an urban neighborhood on the brink of a whole lotta development. Many of us want it to remain truly diverse and make it an equitable, affordable place to live, and many of us are involved in multiple efforts (community gardens, food desert issues, local school support, broad historical research, etc.). Are any of you combining your efforts along with the bicycle part of things? Thanks! Sue P. WheelHouse Cincy

2 1

workshop layout
by Ulick O'Beirne 04 May '18

04 May '18

Hi there guys- We're in the process of looking for a premises and would love to hear and see what thoughts others might have put in to designing and building their workshops- and if you want to show off some really good pictures that'd be great too! Much obliged, Ulick

2 2

"Bicycle / Race" and a Special Discount for Us!
by Josh Bisker 04 May '18

04 May '18

Hiyeeee everyone! The ever-amazing Adonia Lugo has just released a new book called Bicycle / Race <https://microcosmpublishing.com/catalog/books/7833> about Los Angeles! It looks freaking amazing. I reached out to the good folks at Microcosm Publishing to ask about a discount code for us all, since Bike!Bike! will be headed to LA. They wrote back with a hearty yes! Here's a note from bike writer hero Elly Blue: The response to this book has been really tremendous and heartwarming. I've > loved working on it and hope everyone loves reading it just as much! Please > let Bike!Bike! folks know they can use the coupon BIKEBIKEBIKEBIKE to get > 15% off their order. I wish I could make it to this event, by the way -- > Areli in LA was telling me about it, and it sounds dreamy. Have the best > time, and keep up the amazing work. So get your discount copies and we can all arrive in LA better versed in what's going on with bikes and race and everything else there. Feel free to send a thank-you to Elly or Kristine at Microcosm, too :) Josh Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/> ---------- Forwarded message ---------- From: Kristine Anstine <kristine(a)microcosmpublishing.com> Date: Fri, May 4, 2018 at 12:46 PM Subject: Fwd: Bicycle / Race ~ NEW from Microcosm Publishing! To: kristine(a)microcosmpublishing.com Dear People, We are pleased to announce the arrival of our newest book, BICYCLE / RACE <https://microcosmpublishing.com/catalog/books/7833>: Author Adonia Lugo (founding member of CicLAvia) was a contributor to Bikequity <https://microcosmpublishing.com/catalog/books/6678/> and Bikenomics <https://microcosmpublishing.com/catalog/books/4418/>, which you got in the past. This is her best, most personal, comprehensive, *and* most actively inspiring writing to date. Of course, we also have our beautiful new Classic Bicycle Coloring Book <https://microcosmpublishing.com/catalog/books/7046>, the gorgeous Boneshaker <https://microcosmpublishing.com/catalog/books/8323/> imports, bike t-shirts <https://microcosmpublishing.com/catalog/tshirts?subject=bike> , zines <https://microcosmpublishing.com/catalog/zines?subject=bike> like the awesome Velo Vixen <https://microcosmpublishing.com/catalog/zines/5980> , and stickers <https://microcosmpublishing.com/catalog/stickers?subject=bike> , stickers, stickers! <https://microcosmpublishing.com/catalog/stickers?subject=bike> Please let us know if you need any assistance with a wholesale order. Best Regards, *Kristine & Jeri* *Microcosm Wholesale* *Kristine: 917-277-9435 * kristine@microcosm publishing.com *Jeri: 503-333-4722* j eri(a)microcosmpublishing.com *Microcosm Publishing <http://microcosmpublishing.com/>* is made in the USA!| <https://maps.google.com/?q=the+USA!%7C%C2%A0+2752+N+Williams+Ave.+Portland,…>2752 N Williams Ave. Portland, OR 97227 <https://maps.google.com/?q=the+USA!%7C%C2%A0+2752+N+Williams+Ave.+Portland,…> **

1 0

Kickstand Community Bike Shop is Hiring a Program Coordinator!
by Kickstand 02 May '18

02 May '18

Hey all, Kickstand Community Bike shop in East Vancouver looking for 1 full-time or 2 part-time Program Coordinator(s). Here's our job posting <https://www.goodwork.ca/jobs/job-in-vancouver-bc-community-cycling-programs…> if you or someone you know might be interested in applying. Deadline is June 1st Have a good one, Becca *Kickstand Community Bikes* 1739 Venables Street, Vancouver, BC, V5L 2H3 <https://goo.gl/maps/5HK3GtdanMv> *Hours of Operation* M • W • F: 5pm to 9pm Sunday: 1pm to 5pm WGQT Night: 2nd & 4th Tuesday of the month, 6:30-8:30pm kickstandbikes(a)gmail.com eastvankickstand.org Facebook <https://www.facebook.com/Eastvan.Kickstand> • Twitter <https://twitter.com/kickstandbikes> • Instagram <https://www.instagram.com/kickstandcommunitybikes/>

1 0

Re: [TheThinkTank] "payment" for pop-up repair sessions (Angel York) & (Sarah FioRito)
by Sue Plummer 02 May '18

02 May '18

Excellent Suggestions, Sarah and Angel! Thanks to everyone for the helpful ideas!! Sue P. WheelHouse Cincy On Wed, May 2, 2018 at 4:04 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. Re: "payment" for pop-up repair sessions (Sarah FioRito) > 2. Re: "payment" for pop-up repair sessions (Angel York) > 3. Re: Thethinktank Digest, Vol 140, Issue 1 (Lawrence Mohammed) > > > ---------- Forwarded message ---------- > From: Sarah FioRito <sarah.fiorito(a)gmail.com> > To: ron.kellis(a)velocitycoop.org, The Think Tank < > thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 1 May 2018 13:48:43 -0700 > Subject: Re: [TheThinkTank] "payment" for pop-up repair sessions > > > I might suggest that folks working in a community bike shop setting use > neither the word "client" nor "customer" but rather "community member," > "friend" or "patron." > > I personally never use the word customer when in the shop and encourage > other facilitators to do the same. The word customer reduces the > relationship between the shop and the community member to a financial > transaction. As many of us are in the work from the ethos of supporting > access, creating vibrant community spaces, etc, rather than seeing our work > as a business transaction, finding alternatives to the word customer may be > of interest since that term is pretty specific to a certain type of > relationship. > > > > On Thu, Apr 26, 2018 at 10:52 AM, Ron Kellis <ron.kellis(a)velocitycoop.org> > wrote: > >> One of the things we have done is to make up an 11X17" poster (easy to >> print) listing what a donation will buy: >> >> And as another suggested, you can put a thermometer poster on the >> donation jar with how much you are trying to raise and whee you are at. >> >> On Mon, Apr 23, 2018 at 9:19 AM, Sue Plummer <scplummer65(a)gmail.com> >> wrote: >> >>> HI Folks, >>> >>> I'm part of a start-up effort in an urban neighborhood in Cincinnati. >>> We hope to have our own shop, one day, where we will rebuild and sell >>> bikes, affordably. In the meantime, we have pop-up repair sessions (2 >>> Saturdays/month) planned for the spring/summer, this year. >>> >>> We did a few of these part of last summer, but didn't charge anything. >>> I am not completely comfortable with that, and would like to ask clients to >>> offer something in exchange. i'd love any ideas about this. >>> >>> Thanks! >>> >>> Sue Plummer >>> WheelHouse Cincy >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> >> -- >> Ron Kellis | Véloteer & Basic Maintenance Instructor | VéloCity Bicycle >> Co-op | 2111 Mt. Vernon Ave., Alexandria, VA 22301 | velocitycoop.org | >> +1 (703) 549-1108 >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > ---------- Forwarded message ---------- > From: Angel York <aniola(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: "ron.kellis(a)velocitycoop.org" <ron.kellis(a)velocitycoop.org> > Bcc: > Date: Tue, 1 May 2018 15:19:15 -0600 > Subject: Re: [TheThinkTank] "payment" for pop-up repair sessions > Offhand, i have seen a lot of range. > - Vague, pay what you can > - $5/day, $50/year > - $5/hour, $20/month, $60/year, $200/lifetime > > One I saw that I thought was a very bad idea was to charge based on level > of experience. They charged beginners a lot more, which probably means > their patrons were more likely to ride dangerous bike. At the very least, > it meant only people who could afford the $15/hour or whatever it was would > be asking for help. > > Money comes from > - donations, fundraider parties > - complete bikes > - used parts and new (consumable) parts > - memberships > - one-off use of tools and expertise > > Give a range and suggested prices. Most people act confused when there > isn't a specific donation amount requested. If requestinv volunteer time in > exchange, have an easily acessible, prominent list with a wide range of > tasks and skill levels. > > Consider implementing a safer space agreement from the beginning, if you > don't already have one. How are you going to maintain a diverse bike repair > community? > > One major issue that comes up a lot is more imbalanced patron:volunteer > ratio. ( I believe this contributes to gender imbalance due to gender > norms, but it also leads to volunteer burnout and inadequate instruction. ) > Consider nipping this in the bud by implementing an appointment system, > especially when you get a longer-term location. > > After meetings, take the key decisions from the minutes and use them to > create your handbook. It starts with a few sentences and grows over time. > The bikecollectives wiki is a good place to store your handbook. > > Back to your question. Whatever options you choose, spell them out in > clear and simple language with prominent signage, and also verbally explain > all the options for each patron. > > On Tuesday, May 1, 2018, Sarah FioRito <sarah.fiorito(a)gmail.com> wrote: > >> >> >> I might suggest that folks working in a community bike shop setting use >> neither the word "client" nor "customer" but rather "community member," >> "friend" or "patron." >> >> I personally never use the word customer when in the shop and encourage >> other facilitators to do the same. The word customer reduces the >> relationship between the shop and the community member to a financial >> transaction. As many of us are in the work from the ethos of supporting >> access, creating vibrant community spaces, etc, rather than seeing our work >> as a business transaction, finding alternatives to the word customer may be >> of interest since that term is pretty specific to a certain type of >> relationship. >> >> >> >> On Thu, Apr 26, 2018 at 10:52 AM, Ron Kellis <ron.kellis(a)velocitycoop.org >> > wrote: >> >>> One of the things we have done is to make up an 11X17" poster (easy to >>> print) listing what a donation will buy: >>> >>> And as another suggested, you can put a thermometer poster on the >>> donation jar with how much you are trying to raise and whee you are at. >>> >>> On Mon, Apr 23, 2018 at 9:19 AM, Sue Plummer <scplummer65(a)gmail.com> >>> wrote: >>> >>>> HI Folks, >>>> >>>> I'm part of a start-up effort in an urban neighborhood in Cincinnati. >>>> We hope to have our own shop, one day, where we will rebuild and sell >>>> bikes, affordably. In the meantime, we have pop-up repair sessions (2 >>>> Saturdays/month) planned for the spring/summer, this year. >>>> >>>> We did a few of these part of last summer, but didn't charge anything. >>>> I am not completely comfortable with that, and would like to ask clients to >>>> offer something in exchange. i'd love any ideas about this. >>>> >>>> Thanks! >>>> >>>> Sue Plummer >>>> WheelHouse Cincy >>>> >>>> ____________________________________ >>>> >>>> The ThinkTank mailing List >>>> >>>> Unsubscribe from this list here: http://lists.bikecollectives.o >>>> rg/options.cgi/thethinktank-bikecollectives.org >>>> >>>> >>>> >>> >>> >>> -- >>> Ron Kellis | Véloteer & Basic Maintenance Instructor | VéloCity Bicycle >>> Co-op | 2111 Mt. Vernon Ave., Alexandria, VA 22301 | velocitycoop.org | >>> +1 (703) 549-1108 >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> > > ---------- Forwarded message ---------- > From: Lawrence Mohammed <law(a)probikeservice.co.uk> > To: thethinktank(a)lists.bikecollectives.org > Cc: > Bcc: > Date: Wed, 2 May 2018 03:09:44 +0100 > Subject: Re: [TheThinkTank] Thethinktank Digest, Vol 140, Issue 1 > Hi Ulick, > > Shots of our workshop attached: > > 3 main workbenches with toolboards above, one workbench between these with > the PV system and workshop folders in & a whiteboard above > Let me know if you want close ups of workbenches and layouts... > ...also have dimensions of the actual workbenches we built too somewhere > > We started from need/space requirement [we're in a shipping container so > this is tight], then looked at ergonomics/anthropometrics and built > everything around optimal working/maximum storage/usage > > Warmest regards, > > *Lawrence Mohammed* > Director & Head Mechanic > Pro Bike Service C.I.C. > *+44 (0)77 222 58587* > *probikeservice.co.uk <https://probikeservice.co.uk>* > *facebook.com/probikeservice > <https://www.facebook.com/professionalbikeservice>* > > > > > > > > > *[Location, NOT delivery address] Pro Bike Service C.I.C. Multi-Storey Car > Park Lesney Avenue Olympic Park London E20 3BS * > On 01/05/18 21:04, thethinktank-request(a)lists.bikecollectives.org wrote: > > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > > > Today's Topics: > > 1. workshop layout (Ulick O'Beirne) > 2. Re: workshop layout (Ulick O'Beirne) > > > > _______________________________________________ > Thethinktank mailing listThethinktank@lists.bikecollectives.orghttp://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.org > > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > >

1 0

Re: [TheThinkTank] Thethinktank Digest, Vol 140, Issue 1
by Lawrence Mohammed 01 May '18

01 May '18

Hi Ulick, Shots of our workshop attached: 3 main workbenches with toolboards above, one workbench between these with the PV system and workshop folders in & a whiteboard above Let me know if you want close ups of workbenches and layouts... ...also have dimensions of the actual workbenches we built too somewhere We started from need/space requirement [we're in a shipping container so this is tight], then looked at ergonomics/anthropometrics and built everything around optimal working/maximum storage/usage Warmest regards, *Lawrence Mohammed* Director & Head Mechanic Pro Bike Service C.I.C. *+44 (0)77 222 58587* *probikeservice.co.uk <https://probikeservice.co.uk>* *facebook.com/probikeservice <https://www.facebook.com/professionalbikeservice>* /[Location, NOT delivery address] Pro Bike Service C.I.C. Multi-Storey Car Park Lesney Avenue Olympic Park London E20 3BS / On 01/05/18 21:04, thethinktank-request(a)lists.bikecollectives.org wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > > Today's Topics: > > 1. workshop layout (Ulick O'Beirne) > 2. Re: workshop layout (Ulick O'Beirne) > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.…

1 0

"payment" for pop-up repair sessions
by Sue Plummer 01 May '18

01 May '18

HI Folks, I'm part of a start-up effort in an urban neighborhood in Cincinnati. We hope to have our own shop, one day, where we will rebuild and sell bikes, affordably. In the meantime, we have pop-up repair sessions (2 Saturdays/month) planned for the spring/summer, this year. We did a few of these part of last summer, but didn't charge anything. I am not completely comfortable with that, and would like to ask clients to offer something in exchange. i'd love any ideas about this. Thanks! Sue Plummer WheelHouse Cincy

9 8

The Iowa City Bike Library is hiring!
by Cody 30 Apr '18

30 Apr '18

The Bike Library is a fantastic organization in a vibrant midwestern college town. Two positions are available. Executive Director: http://bikelibrary.org/ExecutiveDirector.pdf Shop Manager: http://bikelibrary.org/ShopManager.pdf To apply, please submit a resume and cover letter by May 4th to nathanshepic(a)gmail.com. __________________ Cody Gieselman Executive Director Iowa City Bike Library 700 S Dubuque St www.bikelibrary.org

1 0

The Bike Church is hiring
by Bike Church Santa Cruz 23 Apr '18

23 Apr '18

Job Title: Bicycle Mechanic/Collective member The Bike Church is a collectively run bicycle repair shop and educational space located in downtown Santa Cruz. We are seeking a highly motivated core member to share responsibility in running the shop. This includes both working with the public during our open hours as well as maintaining/running the shop in the off hours, doing repairs, and strategizing for the shop's long term plan. The Bike Church is a cooperative which means you will be working side-by-side with other mechanics on jobs that include but are not limited to: assisting the public in working on bikes, processing incoming donations of used bikes and parts, fixing bikes to sell, office work, cleaning, inventory, as well as one-off projects which vary. You must be a self-motivated, responsible individual who is task-oriented and understands the importance of communication. It is not required but very helpful if applicants have some familiarity with our space and collectively run groups. We would like to strengthen the collective process and also expand the business. Please have some experience with bike repair and the bike industry. Interest in bookkeeping is a plus. Bilingual/multilingual is a plus. Grant writing is a plus. Computer skills are a plus. An important value of the Bike Church is to be a safe space for individuals from our community no matter their race, gender identity, sexual orientation, age, income, or ability. Thus any applicants must also be able to foster, respect and create a safe, fun, space for our community. In addition, the Bike Church is at times a very vibrant, busy space, and staff members must have strong people skills and, importantly, communication about boundaries. Duties: work at least two shifts with the public per week (shifts are 5.5 or 6.5 hours long) attend periodic meetings work with other mechanics on tasks and projects which are chosen and guided by the collective 19 hours total per week (might vary with season or need) $14/hr vacation (unpaid) per year taken at once or intermittent, scheduled collectively with other staff members. at least one year commitment with a performance review after 3 months To apply, please submit a resume and cover letter to: Bike Church 703 Pacific Ave Santa Cruz CA 95060 OR thebikechurch(a)gmail.com Email with any questions -- Come check us out: Monday 1-7 Tuesday 1-7 Wednesday 1-7 Thursday 1-7 Friday CLOSED Saturday 12-5 Womyn, Trans, and Femme Workshop. 1st and 3rd Sunday 12-3 The Bike Church 703 Pacific Avenue Santa Cruz, CA 95060 831/425-BIKE bikechurch(a)santacruzhub.org

1 0

Quill Stem Wedge Angle?
by Jean-François Caron 11 Apr '18

11 Apr '18

Does anyone have information or experience about the typical wedge angle for quill stems? Saint Sheldon doesn't mention a specific angle, but I did find an ISO document of dubious brevity that claims it's supposed to be 36 degrees since 1990. Measuring a stem (early 90s I think) I have with me, I'm getting more like 34 degrees. Jean-François References: http://www.sheldonbrown.com/gloss_w.html#wedgebolt <http://www.sheldonbrown.com/gloss_w.html#wedgebolt> https://www.evs.ee/preview/iso-8562-1990-en.pdf <https://www.evs.ee/preview/iso-8562-1990-en.pdf>

2 1

Re: [TheThinkTank] Thethinktank Digest, Vol 138, Issue 12
by Martyn Laxton 10 Apr '18

10 Apr '18

This email address is no longer valid Please delete it from your address book and mail server Please resend the email to info(a)rideoncycling.org and ensure this is added to your email address lists Thanks for your help Regards Martyn Laxton Founder & CEO of Ride On Cycling For All Registered Charity 1174055 www.rideoncycling.org -----Original Message----- From: Thethinktank <thethinktank-bounces(a)lists.bikecollectives.org> On Behalf Of thethinktank-request(a)lists.bikecollectives.org Sent: Saturday, 17 March 2018 20:05 To: thethinktank(a)lists.bikecollectives.org Subject: Thethinktank Digest, Vol 138, Issue 12 Send Thethinktank mailing list submissions to thethinktank(a)lists.bikecollectives.org To subscribe or unsubscribe via the World Wide Web, visit https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.bike… or, via email, send a message with subject or body 'help' to thethinktank-request(a)lists.bikecollectives.org You can reach the person managing the list at thethinktank-owner(a)lists.bikecollectives.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..."

1 0

Re: [TheThinkTank] Thethinktank Digest, Vol 139, Issue 5
by eric clough 08 Apr '18

08 Apr '18

I have been following the replies to my initial message about the Chinese bike share surplus situation. Thanks to all who have replied. I really got a good laugh out of the Slate.com link from (Elese Daniel Lee?). That was a fun and a useful perspective. Still, as with many folks I think, the images of tens of thousands of bikes piled up is shocking. I also very much appreciate the perspective that these bikes represent a resource that may be junk to the initial manufacturers but they may represent a functional and even valuable resource to someone else. I am a new entrant into this world of 'community' bike shops and international bike-aid projects. I am starting to learn that there are financial and logistical challenges to converting an abandoned bike into a usable tool/vehicle for someone who may need it. Front Street Community Bike Works Coos Bay, OR https://www.facebook.com/CoosCommunityBikes/inbox/?selected_item_id=1000001… On Sun, Apr 8, 2018 at 1:04 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. Re: China Bike Share Surplus? (Ho?i Vi Nguy?n) > > > ---------- Forwarded message ---------- > From: "Hoài Vi Nguyễn" <holita.vn(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Sat, 7 Apr 2018 22:31:49 -0700 > Subject: Re: [TheThinkTank] China Bike Share Surplus? > Dockless bikeshare just implemented in San Diego a few months ago and > usual issues have arisen with the use. Bikes are left blocking entryways, > wheelchair ramps, and walkways. Users have thrown them into water bodies, > hung them from trees, thrown them into the numerous canyons. > > Business bros ride them through the downtown district. But more > importantly, houseless people have adopted them. The design considerations > of a shared bike: durability, low maintenance, easy to ride: make them > desirable as a poorer person's bike. The only limitation is minimal > internal gearing isn't enough for many of the hills in the city. Bikes are > often appropriated or stripped for parts. > > As a bike kitchen, the only concern I have is being able to maintain and > repair these bikes as some of their components seem to use non-standard > tools / be non-standard sizes. > > The effect of bikeshare though has been pretty cool. More inexperienced > riders-- riding erratically improperly illegally-- has made biking more > visible. Drivers are more on alert for cyclists. > > Hoai Vi Nguyen > core volunteer > Bikes del Pueblo > > On Wed, Apr 4, 2018 at 11:24 PM, Cyclista Nicholas <cyclista(a)inventati.org > > wrote: > >> Still not as horrifying as the bikes, which are genuinely actually >> abandoned, as opposed to parked. >> >> Speaking for myself and my volunteers and staff, we are entirely >> competent to assess whether components and frames are safe or usable and if >> it came to garbage, recycling, or reuse, we'd be in the position to >> determine which was appropriate. I have no doubt that a great number of >> community bike shops out there have staff similarly capable. >> >> We turn away plenty of bikes due to lack of fitness, but I'd hate people >> not to take them to us at all, thinking in advance that the bikes are >> worthless. Reuse should always be explored. I cannot imagine that the >> majority of those thousands of bikes failed in a fundamental structural >> way. That looked to me like pure foolishness and really poor planning. >> >> cyclista NIcholas >> >> >> >> On 2018-04-05 04:45, Elese Daniel wrote: >> >>> i work in the station-based bikeshare world and i'm privy to much of the >>> conversation/trepidation re dockless bikeshare. >>> in concept, i so totally respect the acquiring in mass of discarded bikes >>> for co-op and community use/resale-- because, yes, get the ppl bikes-- >>> but, >>> in the current dockless bikeshare/for-profit/venture capital world, i >>> share >>> some earlier voiced concerns regarding the safety, condition and >>> rideability of the bikes you'd receive -- which most likely originated as >>> cheap bikes to begin with -- cheap as in weak materials produced at high >>> quantity, low quality. (idk though-- trash... treasure.. sometimes one in >>> the same) >>> >>> on a lighter and truer note: my partner shared this article with me >>> yesterday and i really loved it <3 >>> https://slate.com/business/2018/04/astounding-photos-capture >>> -graveyards-of-unused-dockless-vehicles-in-american-cities.html >>> >>> -lee >>> >>> On Wed, Apr 4, 2018 at 8:11 PM, Cyclista Nicholas < >>> cyclista(a)inventati.org> >>> wrote: >>> >>> China may be weird about bikes in general. I had a friend who lived in a >>>> smaller city in Fujian province for to years, and they lived in an >>>> enormous >>>> apartment building with a very large area for bike parking in the >>>> courtyard. They said there were around a hundred bikes there obviously >>>> long >>>> since abandoned and rotting, but it was very taboo to remove them - you >>>> would get into serious trouble, even though the owners had long since >>>> moved >>>> away. >>>> >>>> Those pictures in the Atlantic turned my stomach. Staggeringly sad. If >>>> they have some huge capacity for metal recycling that will eventually >>>> take >>>> care of that surplus, but if so how long do they wait to melt them down? >>>> They could put a medium-sized country on bicycles with just the quantity >>>> shown in those pictures. >>>> >>>> Thanks for the heads up about this problem, Eric. We're getting a new >>>> bikeshare in our town in a couple of months, and maybe we can get ahead >>>> of >>>> contributing to this problem, at least. >>>> >>>> cyclista Nicholas >>>> >>>> >>>> >>>> On 2018-04-03 16:15, Gabriel Trainer wrote: >>>> >>>> Those are frightening pictures! One or a few bikes are cool. Thousands >>>>> of >>>>> bikes piled together are no better than a trash heap. >>>>> Gabriel >>>>> >>>>> On Mon, Apr 2, 2018, 3:10 PM Clint Watson <clint(a)bicyclecollective.org >>>>> > >>>>> wrote: >>>>> >>>>> I had a meeting with the Director of SLC Greenbike last week regarding >>>>> >>>>>> this. It's a huge and growing problem for many cities in the US. >>>>>> Apparently >>>>>> the business model for these operations is modeled after Uber or other >>>>>> tech >>>>>> startups--don't worry about profits, just get investment money and >>>>>> dominate >>>>>> the market/run other bike share companies out of business by offering >>>>>> the >>>>>> service free of charge to cities. >>>>>> >>>>>> The bikes average $200 each and because of that they are being used >>>>>> as a >>>>>> disposable resource. They're being discarded, damaged, and vandalized >>>>>> at >>>>>> staggering rates in places like Dallas. >>>>>> >>>>>> >>>>>> http://money.cnn.com/2018/02/05/technology/dallas-bikeshare- >>>>>> limebike-ofo/index.html >>>>>> >>>>>> And Seattle is now starting to see similar problems. >>>>>> >>>>>> I don't see it as a sustainable solution to transportation: if we're >>>>>> going >>>>>> to start seeing entire landfills full of bikes (i.e. the photos from >>>>>> China), that seems to undercut the argument that bikes are a more >>>>>> sustainable solution than other transportation options. And the bigger >>>>>> danger is that the companies offering this new model (Limebike, for >>>>>> example) have no long term model. They've been operating at a loss >>>>>> since >>>>>> inception and will continue to for the foreseeable future. If they >>>>>> replace >>>>>> more sustainable models, then pull the plug because they lose their >>>>>> investment funding, it will set the whole bike share movement back >>>>>> years. >>>>>> >>>>>> As for just using the discarded bikes in your local co-op, I'm also >>>>>> skeptical. If they're not being used by the bike share company, the >>>>>> assumption is they're damaged. I can't say for certain whether it >>>>>> would >>>>>> be >>>>>> cost effective to repair and repurpose a fleet of bikes that were >>>>>> barely >>>>>> usable in the first place because I haven't had first hand experience >>>>>> with >>>>>> them, but I'm skeptical. >>>>>> >>>>>> Just my two cents >>>>>> >>>>>> Clint Watson >>>>>> Executive Director >>>>>> Bicycle Collective >>>>>> www.bicyclecollective.org >>>>>> clint(a)bicyclecollective.org >>>>>> >>>>>> *The mission of the Bicycle Collective is to promote cycling as an >>>>>> effective and sustainable form of transportation, recreation, and as a >>>>>> cornerstone of a cleaner, healthier, and safer society. The Collective >>>>>> provides refurbished bicycles and educational programs to the >>>>>> community, >>>>>> focusing on children and lower income households.* >>>>>> >>>>>> >>>>>> On Fri, Mar 30, 2018 at 1:40 PM, Katy Collet <katy(a)cyclonordsud.org> >>>>>> wrote: >>>>>> >>>>>> Bonjour, >>>>>> >>>>>>> Prenez note que je serai absente du 20 >>>>>>> <https://maps.google.com/?q=renez+note+que+je+serai+absente+du+20+&entry=gma…>mars >>>>>>> au 2 avril inclusivement. >>>>>>> Pour >>>>>>> toute urgence veuillez contacter François Delwaide à >>>>>>> francois(a)cyclonordsud.org >>>>>>> Merci, >>>>>>> >>>>>>> Hi, >>>>>>> I'll be out of the office from March 20th to April 2nd included. In >>>>>>> case of emergency, please contact François Delwaide at >>>>>>> francois(a)cyclonordsud.org >>>>>>> Best, >>>>>>> >>>>>>> Saludos, >>>>>>> Estaré afuera de la oficina desde >>>>>>> marzo 20 hasta abril 2 inclusivo. En caso de urgencia, por favor >>>>>>> escribir >>>>>>> a >>>>>>> François Delwaide francois(a)cyclonordsud.org >>>>>>> Gracias, >>>>>>> >>>>>>> Katy >>>>>>> Collet >>>>>>> Coordonnatrice projets internationaux >>>>>>> Cyclo Nord-Sud >>>>>>> 8717, 8e Avenue, >>>>>>> Montréal, QC H1Z 2X4 >>>>>>> 514 843-0077 >>>>>>> http://cyclonordsud.org/ >>>>>>> >>>>>>> >>>>>>> >>>>>>> ____________________________________ >>>>>>> >>>>>>> The ThinkTank mailing List >>>>>>> >>>>>>> Unsubscribe from this list here: >>>>>>> http://lists.bikecollectives.org/options.cgi/thethinktank-bi >>>>>>> kecollectives.org >>>>>>> >>>>>>> >>>>>>> ____________________________________ >>>>>>> >>>>>> >>>>>> The ThinkTank mailing List >>>>>> >>>>>> Unsubscribe from this list here: >>>>>> http://lists.bikecollectives.org/options.cgi/thethinktank-bi >>>>>> kecollectives.org >>>>>> >>>>>> >>>>>> >>>>>> ____________________________________ >>>>> >>>>> The ThinkTank mailing List >>>>> >>>>> Unsubscribe from this list here: >>>>> http://lists.bikecollectives.org/options.cgi/thethinktank-bi >>>>> kecollectives.org >>>>> >>>>> ____________________________________ >>>> >>>> The ThinkTank mailing List >>>> >>>> Unsubscribe from this list here: http://lists.bikecollectives.o >>>> rg/options.cgi/thethinktank-bikecollectives.org >>>> >>>> >>>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: >>> http://lists.bikecollectives.org/options.cgi/thethinktank-bi >>> kecollectives.org >>> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > >

1 0

China Bike Share Surplus?
by eric clough 07 Apr '18

07 Apr '18

Hello ThinkTank list serve and fellow community bike shoppers. I have been following messages on this list serve for some time now and it I think it is finally my time to post a message to the group. Is there an organization out there that in some way may be involved or working with the apparently vast surplus of bicycles in China? I just came across this web site for The Atlantic... https://www.theatlantic.com/photo/2018/03/bike-share-oversupply-in-china-hu… Good googly-woogly!!! Talk about a bicycle resource!

7 7

Re: [TheThinkTank] Thethinktank Digest, Vol 139, Issue 2
by eric clough 03 Apr '18

03 Apr '18

Thank you for your reply, Clint. I don't have much wisdom to bring to bear on this subject but the wasted resource grates against my native inclination for efficiency, re-use and re-purposing. My instincts tell me you are correct in that the construction style of these "share" bikes does not lend itself to long-life, sustainability or restoration into a more traditional bike - but I just don't know if that is true. I have never even ridden one. Which is why I put the question to this bike collectives list serve. On Tue, Apr 3, 2018 at 1:06 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. Re: China Bike Share Surplus? (Clint Watson) > 2. Re: China Bike Share Surplus? (Gabriel Trainer) > > > ---------- Forwarded message ---------- > From: Clint Watson <clint(a)bicyclecollective.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Mon, 2 Apr 2018 16:10:25 -0600 > Subject: Re: [TheThinkTank] China Bike Share Surplus? > I had a meeting with the Director of SLC Greenbike last week regarding > this. It's a huge and growing problem for many cities in the US. Apparently > the business model for these operations is modeled after Uber or other tech > startups--don't worry about profits, just get investment money and dominate > the market/run other bike share companies out of business by offering the > service free of charge to cities. > > The bikes average $200 each and because of that they are being used as a > disposable resource. They're being discarded, damaged, and vandalized at > staggering rates in places like Dallas. > > http://money.cnn.com/2018/02/05/technology/dallas- > bikeshare-limebike-ofo/index.html > > And Seattle is now starting to see similar problems. > > I don't see it as a sustainable solution to transportation: if we're going > to start seeing entire landfills full of bikes (i.e. the photos from > China), that seems to undercut the argument that bikes are a more > sustainable solution than other transportation options. And the bigger > danger is that the companies offering this new model (Limebike, for > example) have no long term model. They've been operating at a loss since > inception and will continue to for the foreseeable future. If they replace > more sustainable models, then pull the plug because they lose their > investment funding, it will set the whole bike share movement back years. > > As for just using the discarded bikes in your local co-op, I'm also > skeptical. If they're not being used by the bike share company, the > assumption is they're damaged. I can't say for certain whether it would be > cost effective to repair and repurpose a fleet of bikes that were barely > usable in the first place because I haven't had first hand experience with > them, but I'm skeptical. > > Just my two cents > > Clint Watson > Executive Director > Bicycle Collective > www.bicyclecollective.org > clint(a)bicyclecollective.org > > *The mission of the Bicycle Collective is to promote cycling as an > effective and sustainable form of transportation, recreation, and as a > cornerstone of a cleaner, healthier, and safer society. The Collective > provides refurbished bicycles and educational programs to the community, > focusing on children and lower income households.* > > On Fri, Mar 30, 2018 at 1:40 PM, Katy Collet <katy(a)cyclonordsud.org> > wrote: > >> Bonjour, >> Prenez note que je serai absente du 20 mars au 2 avril inclusivement. Pour >> toute urgence veuillez contacter François Delwaide à >> francois(a)cyclonordsud.org >> Merci, >> >> Hi, >> I'll be out of the office from March 20th to April 2nd included. In >> case of emergency, please contact François Delwaide at >> francois(a)cyclonordsud.org >> Best, >> >> Saludos, >> Estaré afuera de la oficina desde >> marzo 20 hasta abril 2 inclusivo. En caso de urgencia, por favor escribir >> a >> François Delwaide francois(a)cyclonordsud.org >> Gracias, >> >> Katy >> Collet >> Coordonnatrice projets internationaux >> Cyclo Nord-Sud >> 8717, 8e Avenue, >> Montréal, QC H1Z 2X4 >> 514 843-0077 >> http://cyclonordsud.org/ >> >> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> > > > ---------- Forwarded message ---------- > From: Gabriel Trainer <getrainer(a)bikefarm.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 03 Apr 2018 16:15:18 +0000 > Subject: Re: [TheThinkTank] China Bike Share Surplus? > Those are frightening pictures! One or a few bikes are cool. Thousands of > bikes piled together are no better than a trash heap. > Gabriel > > On Mon, Apr 2, 2018, 3:10 PM Clint Watson <clint(a)bicyclecollective.org> > wrote: > >> I had a meeting with the Director of SLC Greenbike last week regarding >> this. It's a huge and growing problem for many cities in the US. Apparently >> the business model for these operations is modeled after Uber or other tech >> startups--don't worry about profits, just get investment money and dominate >> the market/run other bike share companies out of business by offering the >> service free of charge to cities. >> >> The bikes average $200 each and because of that they are being used as a >> disposable resource. They're being discarded, damaged, and vandalized at >> staggering rates in places like Dallas. >> >> http://money.cnn.com/2018/02/05/technology/dallas- >> bikeshare-limebike-ofo/index.html >> >> And Seattle is now starting to see similar problems. >> >> I don't see it as a sustainable solution to transportation: if we're >> going to start seeing entire landfills full of bikes (i.e. the photos from >> China), that seems to undercut the argument that bikes are a more >> sustainable solution than other transportation options. And the bigger >> danger is that the companies offering this new model (Limebike, for >> example) have no long term model. They've been operating at a loss since >> inception and will continue to for the foreseeable future. If they replace >> more sustainable models, then pull the plug because they lose their >> investment funding, it will set the whole bike share movement back years. >> >> As for just using the discarded bikes in your local co-op, I'm also >> skeptical. If they're not being used by the bike share company, the >> assumption is they're damaged. I can't say for certain whether it would be >> cost effective to repair and repurpose a fleet of bikes that were barely >> usable in the first place because I haven't had first hand experience with >> them, but I'm skeptical. >> >> Just my two cents >> >> Clint Watson >> Executive Director >> Bicycle Collective >> www.bicyclecollective.org >> clint(a)bicyclecollective.org >> >> *The mission of the Bicycle Collective is to promote cycling as an >> effective and sustainable form of transportation, recreation, and as a >> cornerstone of a cleaner, healthier, and safer society. The Collective >> provides refurbished bicycles and educational programs to the community, >> focusing on children and lower income households.* >> >> On Fri, Mar 30, 2018 at 1:40 PM, Katy Collet <katy(a)cyclonordsud.org> >> wrote: >> >>> Bonjour, >>> Prenez note que je serai absente du 20 mars au 2 avril inclusivement. >>> Pour >>> toute urgence veuillez contacter François Delwaide à >>> francois(a)cyclonordsud.org >>> Merci, >>> >>> Hi, >>> I'll be out of the office from March 20th to April 2nd included. In >>> case of emergency, please contact François Delwaide at >>> francois(a)cyclonordsud.org >>> Best, >>> >>> Saludos, >>> Estaré afuera de la oficina desde >>> marzo 20 hasta abril 2 inclusivo. En caso de urgencia, por favor >>> escribir a >>> François Delwaide francois(a)cyclonordsud.org >>> Gracias, >>> >>> Katy >>> Collet >>> Coordonnatrice projets internationaux >>> Cyclo Nord-Sud >>> 8717, 8e Avenue, >>> Montréal, QC H1Z 2X4 >>> 514 843-0077 >>> http://cyclonordsud.org/ >>> >>> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives. >>> org/options.cgi/thethinktank-bikecollectives.org >>> >>> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives. >> org/options.cgi/thethinktank-bikecollectives.org >> >> > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > >

1 0

Songs about bikez
by Cynthia Williams 02 Apr '18

02 Apr '18

Hey everyone, Sunny and I are working on a podcast about community bike shops that's going to air sometime in February on CiTR 101.9 FM, unceded Coast Salish territories, Vancouver. What are your favourite songs about bikes and biking? We need more solid tunes, especially songs written by women, queer folks, femmes (aka FEMcon) and Canadian content (CANcon), because radio stations in Canada are required to play a certain amount of CANcon. Are you in a grimey band? Send us your tracks! Cheers, *Cyn Williams * *Communications Coordinator* AMS Bike Co-op University of British Columbia 604-822-BIKE | bikecoop.ca | @ubcbike

30 45

Cycles for Change (Twin Cities, MN) hiring an Executive Director
by Jason Partridge 28 Mar '18

28 Mar '18

Cycles for Change <http://www.cyclesforchange.org> in Minneapolis/St. Paul, MN is hiring for an Executive Director! Here is the link to the job description: http://www.minnesotanonprofits.org/job-details?id=148680 We're looking for a dedicated, community-connected, justice-minded leader who can lead this organization in its efforts to use bicycles as a tool for mobility, health equity, economic transformation, and community empowerment. We're excited for a new leader who can help continue to deepen C4C’s commitment to racial, gender, and social justice. Femme/trans/women, black, indigenous, and people of color, GLBTQ people, people living with disabilities, and others directly experiencing structural oppressions are strongly encouraged to apply. Priority deadline for applications is April 20. Feel free to reach out with any questions! Jason

2 1

ABCs Handout or Poster or Protocol
by Josh Bisker 28 Mar '18

28 Mar '18

Heyyo! Do you have a cool handout, take-away, or poster that shows people how to check their ABCs? Show & Tell time :) Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

4 5

Insurance: costs and coverage
by A Westphal 26 Mar '18

26 Mar '18

Hello folks, Common Cycle in Ann Arbor, Michigan is hoping to transition from a mobile repair operation into a storefront cooperative. We currently have a $1 million general liability insurance policy, and we pay around $700/yr for that coverage. Our adviser suggested that we should get directors and officers insurance to protect the 10 board members above and beyond the $1M policy. *My questions*: --> What insurance policies does your organization hold? How much do you pay for that coverage? --> Should Common Cycle purchase additional policies based on our move into a physical space? (in our case, physical space = more patrons served, so our liability may increase). PS: yes, I see the info about insurance on the Wiki ( http://w.bikecollectives.org/index.php?title=Insurance). I am hoping that this thread can collect more personal insights / opinions which don't appear in the Wiki. Thanks for reading, Andrew Common Cycle board member andrew(a)commoncycle.org https://commoncycle.org/

2 1

NBW is hiring a Director of Youth Programs
by Steve Maluk 21 Mar '18

21 Mar '18

Neighborhood Bike Works, in Philadelphia, is hiring a Director of Youth Programs. If you're an inclusive leader with knowledge of the challenges facing Philly youth and a commitment to bikes as a tool for social progress, I hope you'll consider applying. If you have friends or contacts you think ought to see this job description, please spread the word. The job description is below, or can be downloaded here <https://drive.google.com/file/d/1suadKbTP0eKB2bjj05bPXB3FDUgNmO4X/view>. *Qualifications:* The ideal candidate will have 3-5 years of management experience in a non-profit setting or related field, a proven track record successfully supervising and supporting staff and volunteers, and experience working with diverse populations including youth of color and those from low-income families. Background knowledge of Philadelphia’s education system, history, bicycling community, and networks of youth development organizations is preferred. Candidates with non-traditional work and education experience are encouraged – please tell us about those experiences that qualify you for this position. Additional Qualifications: · Driven by the mission and work of NBW. - A Bachelor’s or Master’s Degree in Education, Social Work, Public Administration, or related field preferred; however, equivalent work experience will be considered in lieu of education. - Successful development and implementation of youth programming curriculum. - Commitment to social justice and youth leadership. - Experience with performance management and supporting the professional development of staff. - Facilitation skills, with experience leading a team through inclusive decision-making processes. - Knowledge of nonprofit management. - Must possess and demonstrate superb communication skills, both written and verbal. - Energetic and engaging with youth while being reliable, responsible, and professional. - Familiarity with Philadelphia’s neighborhoods preferred. - Ability to work occasional evenings and weekends as needed. · Experience with Microsoft Office required; database software and web content management systems preferred. · Successful passing of PA State Police Criminal Background Check, Pennsylvania Child Abuse History Clearance, and FBI Clearance required. This is a full-time, salaried, exempt position, with a preferred start date of May 7, 2018. The pay range for this position is $37,500 to $42,500 annually, depending on experience and qualifications. NBW offers a competitive benefits package, including health, dental, and retirement plans. *Please email your resume and cover letter* to jobs(a)neighborhoodbikeworks.org. Applications received by April 13, 2018 will receive priority consideration. We are an Equal Opportunity Employer and actively seek staff who reflect the community we serve. Candidates of color are encouraged to apply. --- Steve Maluk He/Him/His Executive Director *Neighborhood Bike Works <http://neighborhoodbikeworks.org>* <215-386-0316%20x%20113>215-386-0316 x118 <https://neighborhoodbikeworks.org/houseparty>

2 1

Tool Board Fashion Show: Update from NYC!
by Josh Bisker 21 Mar '18

21 Mar '18

Pals! Thanks so much for your tool board photos and reflections. I have an update from us below, and then links to a photo gallery of everyone's submissions from the Think Tank and Facebook. Update: we dramatically reduced the number of tools on our main tool boards to just the essentials, and collected the more bikey tools to a single mechanics board and a tool chest. Below is a photo of our new tool board layout <https://flic.kr/p/24h3RmG>. Charlie's Freewheels in Toronto was our closest model for inspiration: thank you Charlie's! The new layout has been HUGELY helpful for participants and volunteers. - People are less intimidated by the boards! The whole situation is more approachable. - Things get put back more often and with less hassle. - Fewer broken and missing tools. - Better interface for volunteers to help out before participants try a repair that requires expertise or finesse. - Easier to expand operations -- we can see adding a second set of tools to each board on the same pegs as the current ones, with minimal costs and no added confusion. Also! Taking one cue from the shipping container bike repair station in Winnipeg and another from the short tool boards in Salt Lake City, we also *rearranged the layout of our shop, and it kicks ass.* - We used to have a shop floor with tool board and benches on the perimeter and work space in the center. Chaos! - NOW, we have the benches and tools in the center, and stands on the perimeter. SO SMOOTH! It's way, way easier and nicer to work. - We also shortened the heights of the work benches so there's one tall, one medium, one small. - AND, because we shortened the heights of the tool boards, you can see right over them -- so the space feels unified and coherent, not like a bunch of random siloed activities. Lessons we learned: - Fewer tools on each board is better for everyone. Couple this with a master mechanics' board for success. - Pegboard is the WORST. Plywood and nails 4EVA. - Yes, mark the boards with tool names and sizes, BUT ALSO: *mark the tools.* Use an enamel paint marker and clear-coat it with nail polish. This way, new folks can learn the sizes of wrenches and the names of things when they're in hand, and can also easily put them back on the boards. - In a space like ours, centrally located tools and work benches are better than peripheral ones, because they improve the flow of people through the space. Future considerations: - We're going to add offset brake wrenches to the boards, because they are so everyday-useful. - We should have tried doing the outlines with chalk markers, not enamel markers, so that they're easy to erase and re-do. - Our work benches are too bulky and big, especially since people do most of their work in the stand. Less work bench would be fine. By and large, people use them as tables, not work benches. What we really need are just places for folks to put the things they're working with. - I'd personally like to see the benches get decorated and personalized by volunteers, but that's a while away for us. Photo gallery - Here's everyone's tool boards <https://flic.kr/s/aHskuVEvhv>! I put them into a Flickr album. Each filename shows the co-op it came from. xoxoxo Josh Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

6 9

BikeBike '18 LA remote organizing
by erk magosh 15 Mar '18

15 Mar '18

Hey y'all, Los Ángeles is hosting Bike Bike 2018 September 28-30. If you would like to help organize from your city please email Rawkale Horn at rawkalehorn(a)gmail.com. If you have experience with hosting BikeBike or if you have few good ideas please sign up for the remote working group. -erk

1 0

Who is the Bike Repair Hub
by BikeConcord 15 Mar '18

15 Mar '18

Who is the Bike Repair Hub

3 2

Brake Handle Identification
by Ron Kellis 14 Mar '18

14 Mar '18

Salvaged brake handles are rarely kept with the calipers. Anyone have a reasonably reliable method for identifying long pull vs. short pull handles? TIA Ron -- Ron Kellis | Véloteer & Basic Maintenance Instructor | VéloCity Bicycle Co-op | 2111 Mt. Vernon Ave., Alexandria, VA 22301 | velocitycoop.org | +1 (703) 549-1108

6 7

Temp Job: Youth Bike Ed
by David Coppley 13 Mar '18

13 Mar '18

Greetings bicycle-loving do-gooders, Just taking a moment to share this temporary, part-time job opportunity in Olympia, WA. We are seeking two folks to help out with our Spring and Summer Earn-A-Bike classes. Please see the job posting below for details. Thanks for reading, David [cid:image005.jpg@01D3BAB9.7A40F5B0] David Coppley Walk n' Roll Program Assistant Intercity Transit 360-705-5817 (office) 360-701-8379 (cell) PO Box 659 Olympia, WA 98501 dcoppley(a)intercitytransit.com<mailto:dcoppley@intercitytransit.com> Find us on Facebook!<https://www.facebook.com/BicycleCommuterContest> [WalkNRoll_HZ_RGB]

1 0

Re: [TheThinkTank] Thethinktank Digest, Vol 138, Issue 6
by Tegan Moss 09 Mar '18

09 Mar '18

Measure the distance between the pivot and where the cable end sits. Short pull measure about 25mm and long pull about 35mm. On Fri, Mar 9, 2018 at 4:05 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. Brake Handle Identification (Ron Kellis) > 2. Re: Brake Handle Identification (David Oliver) > 3. Re: Brake Handle Identification (Jack Murphy) > > > ---------- Forwarded message ---------- > From: Ron Kellis <ron.kellis(a)velocitycoop.org> > To: The Think Tank <Thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Fri, 9 Mar 2018 07:25:05 -0500 > Subject: [TheThinkTank] Brake Handle Identification > Salvaged brake handles are rarely kept with the calipers. Anyone have a > reasonably reliable method for identifying long pull vs. short pull handles? > > TIA > > Ron > > -- > Ron Kellis | Véloteer & Basic Maintenance Instructor | VéloCity Bicycle > Co-op | 2111 Mt. Vernon Ave., Alexandria, VA 22301 | velocitycoop.org | > +1 (703) 549-1108 > > > ---------- Forwarded message ---------- > From: David Oliver <nowhere3(a)gmail.com> > To: ron.kellis(a)velocitycoop.org, The Think Tank < > thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Fri, 9 Mar 2018 08:02:50 -0500 > Subject: Re: [TheThinkTank] Brake Handle Identification > There are three ways that I teach people how to identify the difference. > > First is the obvious one that if it says V-Brake on the brake, it's long > pull. > > Second is that if you look at most flat bar brake levers there are two > holes, or at least an indent where a second hole could be, where the part > that the head of the cable can go into is (the silver bit in this photo: > https://www.parktool.com/assets/img/repairhelp/housingU_005.jpg). If it's > in the top hole, then it's long pull. If it's in the bottom hole then it's > short pull. There are sometimes a little "C" and a little "V" next to those > holes/indent that make it even easier. > > If that second one doesn't make sense, I can get a photo later today and > send it to you. > > Third is by measuring the distance from the pivot point to where the head > of the cable goes. Park Tool says that it is 21mm for short pull: > https://www.parktool.com/assets/img/repairhelp/ta-flatbar-conv.jpg and > 42mm for long pull: https://www.parktool.com/assets/img/repairhelp/ta- > linearpull.jpg > > In practice for the third method I tell people to measure with a ruler the > distance and if it's less than 30mm then it's short pull, if it's more than > 35mm then it's long pull and if it's hard to tell or somewhere inbetween > then it's hard to tell without testing it. > > On Fri, Mar 9, 2018 at 7:25 AM, Ron Kellis <ron.kellis(a)velocitycoop.org> > wrote: > >> Salvaged brake handles are rarely kept with the calipers. Anyone have a >> reasonably reliable method for identifying long pull vs. short pull handles? >> >> TIA >> >> Ron >> >> -- >> Ron Kellis | Véloteer & Basic Maintenance Instructor | VéloCity Bicycle >> Co-op | 2111 Mt. Vernon Ave., Alexandria, VA 22301 | velocitycoop.org | >> +1 (703) 549-1108 >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > ---------- Forwarded message ---------- > From: Jack Murphy <jack(a)bikewalkwichita.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Fri, 9 Mar 2018 08:42:29 -0600 > Subject: Re: [TheThinkTank] Brake Handle Identification > Nice quick article. I pulled it down to our how-to's folder on our Drive. > So many variations! Still trying to figure how to get all this info to > volunteers as they learn. > Jack Murphy > Bike Walk Wichita > > On Fri, Mar 9, 2018 at 7:02 AM, David Oliver <nowhere3(a)gmail.com> wrote: > >> There are three ways that I teach people how to identify the difference. >> >> First is the obvious one that if it says V-Brake on the brake, it's long >> pull. >> >> Second is that if you look at most flat bar brake levers there are two >> holes, or at least an indent where a second hole could be, where the part >> that the head of the cable can go into is (the silver bit in this photo: >> https://www.parktool.com/assets/img/repairhelp/housingU_005.jpg). If >> it's in the top hole, then it's long pull. If it's in the bottom hole then >> it's short pull. There are sometimes a little "C" and a little "V" next to >> those holes/indent that make it even easier. >> >> If that second one doesn't make sense, I can get a photo later today and >> send it to you. >> >> Third is by measuring the distance from the pivot point to where the head >> of the cable goes. Park Tool says that it is 21mm for short pull: >> https://www.parktool.com/assets/img/repairhelp/ta-flatbar-conv.jpg and >> 42mm for long pull: https://www.parktool.com >> /assets/img/repairhelp/ta-linearpull.jpg >> >> In practice for the third method I tell people to measure with a ruler >> the distance and if it's less than 30mm then it's short pull, if it's more >> than 35mm then it's long pull and if it's hard to tell or somewhere >> inbetween then it's hard to tell without testing it. >> >> On Fri, Mar 9, 2018 at 7:25 AM, Ron Kellis <ron.kellis(a)velocitycoop.org> >> wrote: >> >>> Salvaged brake handles are rarely kept with the calipers. Anyone have a >>> reasonably reliable method for identifying long pull vs. short pull handles? >>> >>> TIA >>> >>> Ron >>> >>> -- >>> Ron Kellis | Véloteer & Basic Maintenance Instructor | VéloCity Bicycle >>> Co-op | 2111 Mt. Vernon Ave., Alexandria, VA 22301 | velocitycoop.org | >>> +1 (703) 549-1108 >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > -- > Jack Murphy > Jack(a)BikeWalkWichita.org > > *Support Bike Walk Wichita when you shop!* > [image: Dillons-Community-Rewards] <http://dillons.com/communityrewards> > > [image: Amazon-Smile] <http://smile.amazon.com/ch/46-2800001> > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > -- -- B!KE: The Peterborough Community Bike Shop 293 George Street North, Peterborough ON (705) 775-7227 communitybikeshop.org

2 1

Toronto
by Tigre Bici 06 Mar '18

06 Mar '18

Hello everyone!! One of us is travelling to Toronto on the 15th of July till the 22th of july and is seeking for a place to stay near the Metro Toronto Convention Center Please send me and email if you know any cool places to stay/get a bike and hopefully will be with one of you awesome cyclist. Cheers R.

2 1

Job Posting: Executive Director / Offre d'emploi: direction générale
by LaBikery 05 Mar '18

05 Mar '18

Hello Everyone, La Bikery Co-operative in Moncton, NB is looking to hire a new Executive Director. It's a great position to build your skills in and I encourage you to share with your networks! Coopéraive La Bikery à Moncton NB cherche un.e nouveau.elle directeur.rice. C'est la position idéale à développer vos compétences. Veuillez partager cette information avec vos réseaux. Details/détails: http://labikery.ca/jobs-emplois-2/ Thank you! Merci! Krysta Cowling Executive Director La Bikery

1 0

Payroll and/or Accounting services for non-profits
by Sterling Stone 05 Mar '18

05 Mar '18

Hello there all, I am seeking some assistance in making a decision. For the Past 5 years, we have handled all financial matters in house with our board members. Payroll, accounting, and end of year reporting (990's) are the primary fun tasks that I am looking to outsource for a no-to-low cost. Does anyone have any experience with any companies (Paychex, ADP, etc) that they would be willing to share, or any suggestions? Thanks, Sterling -- Sterling-A. Stone Executive Director Gearin' Up Bicycles 314 Randolph Pl., NE Washington, DC, 20002 202-780-5174 - Shop 202-487-0179 - Cell SterlingStone(a)gearinupbicycles.org Find us on Facebook <https://www.facebook.com/GearinUpBicycles?ref=hl>, Join us on Meetup <http://www.meetup.com/Gearin-Up-Bicycles-Learn-to-fix-bikes-meet-cool-peopl…>, and follow us on Twitter <https://twitter.com/GearinUpDC> *Support our good work through the Combined Federal Campaign!*

4 3

Bike registry
by Edward Stewart 03 Mar '18

03 Mar '18

I am new to the Think Tank and not sure how to start a new thread. Our coop has the opportunity to serve our city and the police department by becoming the center of bicycle registration. My question is have any others had this experience and what are problems or blessings we might anticipate. The city recently made us the official recipient of discarded unclaimed bikes held by the police department. We received about 75 bikes for our first delivery. Next it will become a twice a year activity (and far fewer bikes). Thanks for your input. Love the discussions. -- Ed Stewart emsco514(a)gmail.com 440-365-6784 <(440)%20365-6784> *I have an escape mechanism for stress: my bike.* <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#m_-3681211892340789405_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

1 0

job in NYC
by Angel York 02 Mar '18

02 Mar '18

saw this on another board https://www.bike.nyc/jobs/youth-programs-manager/

1 0

DJ Fish of
by Bike Talk 02 Mar '18

02 Mar '18

Bike Talk will be streaming to: http://stream.wbai.org:8000/biketalk At 6pm PST tonight--Friday, 3/2/2018 >From 6-6:30 pm the topic will be bike theft and bike registry with Ted Rogers of https://bikinginla.com/ And Bryan Hance of Bike Index <https://bikeindex.org/> >From 6:30-7, youth bike programs with DJ Fish of https://experimentalstation .org/blackstone Here are the phone numbers for listeners to call and comment or question: (818) 752-4939, (818) 752-4771, (818) 752-4989. -- Hear the Bike Talk! podcast at http://archive.kpfk.org/index.php?shokey=biketalk. Website: biketalk.org.

1 0

Games with/on Bikes!
by Sylvie Baele 01 Mar '18

01 Mar '18

Hey yall, I work with a nonprofit cycling and pedestrian advocacy group in Charleston, SC. We are installing a temporary two-way cycle track during our Bicycle Month (May). I'm putting together 3 bicycle safety events that will take place near/around it. I've been to a grungey bike event where we played some games but I can't remember many of them. But I know some exist! I'd like to make this a family friendly event and have it be fun for people of all ages and backgrounds. Anyone have any ideas? Thanks!! Bikes! Sylvie

4 3

Ogden Bicycle Collective is Hiring a Youth Program Coordinator
by Danielle Fry 26 Feb '18

26 Feb '18

Hi all, The Ogden Bicycle Collective is hiring a Youth Program Coordinator! After spending a year successfully developing our growing youth programs, our Youth Program Coordinator is off to meet new challenges. So, we are looking for an equally engaging individual to run our current youth programs including Youth Open Shop Night, Earn-A-Bike, Kids Bike Giveaways, and more. There will be opportunity to develop new programs and serve the youth in the community in new ways as capacity and community interest grows. If you like teaching youth of all ages about bikes and want to make sure all kids get to experience the joy of bikes, this is your gig! The Highlights: Part-time (20-25 hours/week) $10-$14 hourly pay DOE Ability to share the love of bikes with kids throughout the community Attached is the job description. Please feel free to share! -- Danielle Fry Director Ogden Bicycle Collective 936 28th Street Ogden, UT 84403 801-997-0336

1 0

Point of Sale Recommendations
by Phoenix Bikes 26 Feb '18

26 Feb '18

Hi everyone, I don't think this has been asked about for a while so here goes: Phoenix Bikes is moving to a new space and would like to use this opportunity to switch out point-of-sale (POS) systems. Any recommendations? Thanks in advance, Meg *Meg Rapelye, MSW* Executive Director, Phoenix Bikes 4200 S. Four Mile Run Drive Arlington, VA 22206 Bike Shop: 703-575-7762 Cell: 703-350-3843 Web: www.phoenixbikes.org Facebook: https://www.facebook.com/phoenixbikesVA/ Twitter: https://twitter.com/PhoenixBikes Instagram: phoenix_bikes <https://www.instagram.com/phoenix_bikes/>

7 10

501c3 activity and IRS rules
by Bob Giordano 24 Feb '18

24 Feb '18

Below is a link and some text related to IRS rules and 501c3 activity. To me this points out the critical importance of defining your mission. When we started in 1996, we were very clear that 'providing bikes' and 'creating sustainable transportation' were goals towards a 'healthy community and environment', for instance. See part 3 of the IRS 'three-part' test below. (this ruling is from 1985, so more up to date rules may be out there) -- Bob Giordano Free Cycles Missoula, www.freecycles.org Missoula Institute for Sustainable Transportation https://www.irs.gov/pub/irs-tege/eotopicj85.pdf "Questions arise as to whether these activities, such as strikes, economic boycotts, picketing, and mass demonstrations, are permissible methods of furthering educational or charitable purposes. In determining whether activities of this type are consistent with IRC 501(c)(3), the Service relies on a three-part test. Rev. Rul. 80-278. Such activities will be considered permissible under IRC 501(c)(3) if: (1) The purpose of the organization is charitable; (2) the activities are not illegal, contrary to a clearly defined and established public policy, or in conflict with express statutory restrictions; and (3) the activities are in furtherance of the organization's exempt purpose and are reasonably related to the accomplishment of that purpose. " --- Edward Stewart wrote: Be careful of your non-profit status when taking political stance on issues. --- On Thu, Feb 22, 2018, BikeConcord <Smitty(a)bikeconcord.org> wrote: We are debating wether or not to post on our Facebook page. The brands Bell, Giro helmets, Blackburn lights, and CamelBak bags are all owned by the parent company Vista Outdoor, America’s largest manufacturer of ammunition and a big NRA booster.

4 3

Boycott Vista Products
by BikeConcord 24 Feb '18

24 Feb '18

We are debating wether or not to post on our Facebook page. The brands Bell, Giro helmets, Blackburn lights, and CamelBak bags are all owned by the parent company Vista Outdoor, America’s largest manufacturer of ammunition and a big NRA booster. https://vistaoutdoor.com/brands/ Best regards and Happy pedaling! “Smitty” (S. M. Ardrey) Community Bicycle Shop Coordinator a.k.a. The Instigator (925)285-1814 BikeConcord.org Facebook: BikeConcord Bike Concord's nonprofit 501(c) 3 sponsor is Bike East Bay BikeEastBay.org

3 2

Consent Forms and logistics for Drop-in Public Youth Rides and Road Skills learning?
by bike club 19 Feb '18

19 Feb '18

Hey Folks, We are hoping to create a riding/ road skills component to our drop-in youth shop program and I am wondering about the logistics/legalities of how to approach this! For over six month now we've been hosting a drop-in shop program as a collaboration between Pedal Society and Kickstand community bikes one afternoon a week where teens can drop in and get free support servicing their bikes, volunteer on shop projects to learn mechanics skills, and volunteer as part of our earn a bike program.In an effort to make the program as low barrier as possible we have left it as a drop in program vs. having a formal sign up, etc. The drop in is slowly growing a devoted crew of regulars. YAY! It has come to our attention that many teens, especially those who have not previously had access to a bike, do not have competency navigating the roads safely. In an effort to remedy this and build road skills and riding into our program, our thought is to make one week of the month our teen community ride and another day our road skills learning in the parking lot. It seems like hosting a road skills/riding session as a drop-in, with different people showing up every week would come with a host of challenges and complexities. Right now, our best idea, is that youth who will be leaving the parking lot with us on monthly rides will need a consent form and to have demonstrated a certain aptitude for riding. We're not exactly sure how to test for this or how exactly to go about teaching road skills on a drop in basis on a different monthly day while other folks are in the shop with the other instructor. How can we build on road skills when different people may show up every week? Therefore, my associated questions are: - Structure: Does anyone have any feedback on how to structure this? If we have different youth coming in all the time, it's kind of hard to build on road skills that take more than one day to teach - is it feasible to have a drop in program that teaches riding skills? - If many teenagers want to come on a community ride, do we need to cap it like a formal program (2 instructors per 10 youth) or is there a way to facilitate a larger more open community ride? I'd love to hear any feedback folks have for how to make this happen. Woohoo! Sarah -- Sarah Duby FioRito Bike Club Youth Program Coordinator Pedal Energy Development Alternatives (PEDAL) www.pedalpower.org

4 5

Tool Board Fashion Show - late but great
by DCoppley＠intercitytransit.com 19 Feb '18

19 Feb '18

I meant to share our boards, but took a while snapping photos. Work stands, tool boards, and work ticket clipboards are color coordinated. There is storage behind the board for tires and cables. Please enjoy all the lovely type-a organizing. Photos are attached. David David Coppley Walk n' Roll Program Assistant Intercity Transit 360-705-5817 (office) 360-701-8379 (cell) PO Box 659 Olympia, WA 98501 dcoppley(a)intercitytransit.com<mailto:dcoppley@intercitytransit.com> Find us on Facebook!<https://www.facebook.com/BicycleCommuterContest> [WalkNRoll_HZ_RGB]

3 2

Reno Bike Project is hiring a Mechanic Educator
by Genevieve Parker 17 Feb '18

17 Feb '18

Position description attached; feel free to share with your networks. Thanks! Genevieve Parker RBP Program Director http://www.renobikeproject.org/

1 0

The Portland Gear Hub is Hiring a Program Mechanic (Portland, Maine)
by Ainsley Judge 17 Feb '18

17 Feb '18

Hi all, The Portland Gear Hub is looking for an experienced Program Mechanic to join our team in Portland, Maine. The Portland Gear Hub is a non-profit bike and outdoor gear shop powered a parent organization, Camp Ketcha. The Program Mechanic position is a full-time salaried position to lead educational bike maintenance for youth and adults, trail rides and outdoor adventures, as well as perform bike repair service and assist with sales at our retail location. Read the full description here. <https://drive.google.com/file/d/1uabhH7Ua9QbaeXRgl4la3xF8N5sCNuye/view?usp=…> Ainsley Judge Director of the Portland Gear Hub A program of Camp Ketcha Visit our shop at 155 Washington Ave. Take a class at the Bike School at 85 Anderson St. Portland, ME 04101

1 0

Chicago's Blackstone Bicycle Works Youth Education Program Featured In Great Article
by Matthew Searle 16 Feb '18

16 Feb '18

Chicago's *Blackstone Bicycle Works* youth education program was featured in a great online article from Bittersweet Monthly. Take a look at it here: https://bittersweetmonthly.com/stories/blackstone-bicycle-works#chapter-nav *Mission: Blackstone Bicycle Works (BBW) is a youth education program of the Experimental Station. It’s a full-service bike shop dedicated to promoting ecological practices and empowering youth—teaching mechanical skills, job skills, and business literacy to youths ages 8-18.* ______________ Matthew T. Searle Assistant Director Experimental Station 6100 S. Blackstone Ave. Chicago, IL 60637 USA matthew(a)experimentalstation.org office: 773.241.6044; alt: 773.270.2502 experimentalstation.org <http://www.experimentalstation.org>

1 0

Seen any good videos lately on bike traffic safety? (Good enough to teach with?)
by Jim Sheehan 14 Feb '18

14 Feb '18

Dear Think Tank; Do you use a video to teach bike traffic safety? Which one? Who do you teach with it? Is it part of a course that includes actual riding, or is the video all they get? Here's why we want to know: Everyone who gets a bike from OCBC is offered a free Traffic Skills Intro class , but less than 5% of them take it. (It's three hours split evenly between a slideshow/discussion, rodeo drills, and a group ride in city traffic -- the shortest we could make the LAB's 9-hour curriculum) Earn A Bike youth must take this class as part of earning their bike. Most of our other students pay a $25 fee since they didn't buy a bike from us. We get frustrated cancelling classes on these folks when we have less than three students (but a class of two is less educational, not efficient, and just kind of weird). For a long time we asked bike purchasers to take an online quiz on safe cycling (with answer feedback) while we final-checked their bikes. Almost everyone took it, and most said they appreciated the info. But it had no video, so did not demonstrate good technique, or, obviously, give them any guided practice on their bikes. So we want to give better information with a video on the basics of riding in traffic they can watch in the shop (or anytime online) and bring more of them back in with a shorter class that still covers the same "need to knows" -- since they will have seen good practice modeled in a standardized, visual way. (I'm picturing a video version of How to Not Get Hit By Cars). *We'd **also **like to use this video as the first station in community bike rodeos.* Is this a tall order? If you haven't found a video you can stand either, what do you do to teach good bicycle traffic skills? Is it effective? Please leave your answers in this google form <https://goo.gl/forms/P1MVez5bvoFKRmX32>, and for an ironic reward, see this video <https://www.youtube.com/watch?v=prhQixo0sFI> (if you can stand it) for all the production and pedagogical choices we want to avoid at all costs. Thanks, Jim Sheehan Executive Director Ohio City Bicycle Co-op 1840 Columbus Rd Cleveland, Ohio 44113 216 830 2667 OhioCityCycles.org jim(a)ohiocitycycles.org

1 0

Web Developer
by Tigre Bici 14 Feb '18

14 Feb '18

Hello everyone We are looking for a web developer that can help us building our webpage with an online store. We have some ideas on what we need and will love that our page is built from a cyclist developer. If this is your thing please send us and email and we will be in contact Saludos R.

1 0

Re: [TheThinkTank] Board Member "Job" Descriptions
by judith.feist＠gmail.com 12 Feb '18

12 Feb '18

I concur on this request...also director job descriptions...please and thank you. (: Sent from my LG K10, an AT&T 4G LTE smartphone ------ Original message------From: Alix AylenDate: Wed, Feb 7, 2018 12:32 PMTo: thethinktank(a)lists.bikecollectives.org;Cc: Subject:[TheThinkTank] Board Member "Job" Descriptions Hi all, I'm wondering if any collectives might be able to share examples of Board Member "Job Descriptions with me/Charlie's? We have very brief lists of tasks/areas of focus for our members, but I'm hoping to draft something that is a better indication of the time commitments for each member and potential tasks associated with each role. While also keeping in mind that these are volunteer roles. We have 2-3 staff and 9 board members, so I'm just hoping to have something to work off of to assist with articulating roles and managing the board. thank you! -- Alix AylenExecutive Director242.5 Queen Street E. M5A 1S3 Toronto, Ontario t. 416-856-5510 www.charliesfreewheels.ca Charlie's FreeWheels Inspiring a spirit of exploration in youth Sign up for our newsletter Get more young people on bikes! Click the gear to donate to Charlies' FreeWheels.

4 3

Re: [TheThinkTank] recording the benefits of a community bike project
by Ulick O'Beirne 10 Feb '18

10 Feb '18

Re: recording the benefits of a community bike project Hey there, I'm really enjoying being a part of this mailing list. We're trying to get a project off the ground here in West Cork in Ireland. More anon. I'm applying for funding for various bike related projects: Earn A Bike, Fun Cycle Rides encouraging fitness and participation, Recycled Bike Projects, specific school and migrant centre projects. How do you equate your data? How do you record your victories? Or your projects that could have gone better? How do you relate these numbers next time you look for funding to show progress? Thanks a million! Ulick

2 1

Receiving Emails
by lori newton 07 Feb '18

07 Feb '18

Hi there, our bike mechanic ‘joined’ the think tank but isn’t receiving emails yet. Can you hook him up? His name is Oliver Swainson oliver.swainson(a)gmail.com Cheers! lori newton, executive director bike windsor essex <http://bikewindsoressex.com/> 101 university avenue west www.bikewindsoressex.com 519.980.4849

1 0

Board Member "Job" Descriptions
by Alix Aylen 07 Feb '18

07 Feb '18

Hi all, I'm wondering if any collectives might be able to share examples of Board Member "Job Descriptions with me/Charlie's? We have very brief lists of tasks/areas of focus for our members, but I'm hoping to draft something that is a better indication of the time commitments for each member and potential tasks associated with each role. While also keeping in mind that these are volunteer roles. We have 2-3 staff and 9 board members, so I'm just hoping to have something to work off of to assist with articulating roles and managing the board. thank you! -- *Alix Aylen* Executive Director 242.5 Queen Street E. M5A 1S3 Toronto, Ontario t. 416-856-5510 www.charliesfreewheels.ca Charlie's FreeWheels *Inspiring a spirit of exploration in youth* Sign up for our newsletter <http://charliesfreewheels.us3.list-manage.com/subscribe?u=796baa6919ab0f3b6…> Get more young people on bikes! Click the gear to donate to Charlies' FreeWheels <https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=NTHJ4G…> . [image: http://www.charliesfreewheels.ca/donate/] <http://www.charliesfreewheels.ca/donate/>

1 0

Community Bike Shop Exchange Web Prototype (NEW LINK)
by rob＠robertgrossmandesign.com 02 Feb '18

02 Feb '18

2 1

JOB OPPORTUNITY: Ride Program Coordinator, Charlie's FreeWheels (Toronto, Canada)
by Alix Aylen 02 Feb '18

02 Feb '18

Charlie's is hiring a Ride Program Coordinator! Do you LOVE to ride your bike? Do you have experience working with youth? Join the Charlie's FreeWheels team! Help us to grow our ride program and get more kids and youth on bikes! Application deadline: February 16, 2018 See the full posting here: https://www.charliesfreewheels.ca/jobs/ <https://www.charliesfreewheels.ca/jobs/> -- *Alix Aylen* Executive Director 242.5 Queen Street E. M5A 1S3 Toronto, Ontario t. 416-856-5510 www.charliesfreewheels.ca Charlie's FreeWheels *Inspiring a spirit of exploration in youth* Sign up for our newsletter <http://charliesfreewheels.us3.list-manage.com/subscribe?u=796baa6919ab0f3b6…> Get more young people on bikes! Click the gear to donate to Charlies' FreeWheels <https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=NTHJ4G…> . [image: http://www.charliesfreewheels.ca/donate/] <http://www.charliesfreewheels.ca/donate/>

1 0

Your Most Go-To-est Small and Medium Parts
by Josh Bisker 01 Feb '18

01 Feb '18

Pals, we've got a bunch of long skinny red u-line bins (like 4" x 18") on a couple long shelves now that are BALLING. They're super easy access for people to get their hands on small and medium sized parts. What are your like, top ten or top twenty small or medium sized things that people need to get ahold of? What would I not think of, but you're like "oh folks actually need XYZ like all the damn time"? Or do you have cautionary tales, like "don't put fifteen pounds of M5 bolts in one of those, they will get mixed up immediately with other things and it will suck"? Also check it: we're going to take a tip from Kickstand in Vancouver and hot-glue the part itself to the front of the bin, so that no one needs to remember just what a thing is called to have access to the magic. Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

5 9

Community Shop Exchange Online Mobile Prototype
by rob＠robertgrossmandesign.com 01 Feb '18

01 Feb '18

2 1

Re: [TheThinkTank] Thethinktank Digest, Vol 136, Issue 27
by Tegan Moss [B!KE] 31 Jan '18

31 Jan '18

B!KE uses Lightspeed. It has good inventory management and (slightly outdated) integration with our major suppliers. Non-profits get a $50 per month discount making their basic plan totally free. Best of luck! <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Wed, Jan 31, 2018 at 4:07 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. Point of Sale Recommendations (Phoenix Bikes) > 2. Re: Point of Sale Recommendations (David Oliver) > 3. Re: Point of Sale Recommendations (Jimmy Hallyburton) > 4. Re: Point of Sale Recommendations (Phil Graff) > > > ---------- Forwarded message ---------- > From: Phoenix Bikes <phoenixbikes(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 30 Jan 2018 16:56:33 -0500 > Subject: [TheThinkTank] Point of Sale Recommendations > Hi everyone, > > I don't think this has been asked about for a while so here goes: > > Phoenix Bikes is moving to a new space and would like to use this > opportunity to switch out point-of-sale (POS) systems. Any recommendations? > > Thanks in advance, > > Meg > > *Meg Rapelye, MSW* > Executive Director, Phoenix Bikes > 4200 S. Four Mile Run Drive > Arlington, VA 22206 > Bike Shop: 703-575-7762 <(703)%20575-7762> > Cell: 703-350-3843 <(703)%20350-3843> > Web: www.phoenixbikes.org > Facebook: https://www.facebook.com/phoenixbikesVA/ > Twitter: https://twitter.com/PhoenixBikes > Instagram: phoenix_bikes <https://www.instagram.com/phoenix_bikes/> > > > > ---------- Forwarded message ---------- > From: David Oliver <nowhere3(a)gmail.com> > To: phoenixbikes(a)gmail.com, The Think Tank < > thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 30 Jan 2018 17:45:13 -0500 > Subject: Re: [TheThinkTank] Point of Sale Recommendations > It depends a lot on what you want out of a POS. Are things like inventory > management important? Do you want to run reports from within the program? > Do you need it to do accounting/timesheets/staff pay? Do you need it to > take credit/debit payments for you or are you going to get your own > machine? Do you want a piece of software that will also track repairs? > > Lightspeed or Ascend are generally the two top things (More than just POS) > that for profit bike shops use. Square is pretty common as a basic > POS/credit card processor at bike co-ops from what I've seen. There's also > Clover which seems close to Square but I haven't touched that before. > Quickbooks is great for accounting/running reports but is horrible as a POS. > > On Tue, Jan 30, 2018 at 4:56 PM, Phoenix Bikes <phoenixbikes(a)gmail.com> > wrote: > >> Hi everyone, >> >> I don't think this has been asked about for a while so here goes: >> >> Phoenix Bikes is moving to a new space and would like to use this >> opportunity to switch out point-of-sale (POS) systems. Any recommendations? >> >> Thanks in advance, >> >> Meg >> >> *Meg Rapelye, MSW* >> Executive Director, Phoenix Bikes >> 4200 S. Four Mile Run Drive >> Arlington, VA 22206 >> Bike Shop: 703-575-7762 <(703)%20575-7762> >> Cell: 703-350-3843 <(703)%20350-3843> >> Web: www.phoenixbikes.org >> Facebook: https://www.facebook.com/phoenixbikesVA/ >> Twitter: https://twitter.com/PhoenixBikes >> Instagram: phoenix_bikes <https://www.instagram.com/phoenix_bikes/> >> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > ---------- Forwarded message ---------- > From: Jimmy Hallyburton <jimmy(a)boisebicycleproject.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: phoenixbikes(a)gmail.com > Bcc: > Date: Wed, 31 Jan 2018 03:07:40 +0000 > Subject: Re: [TheThinkTank] Point of Sale Recommendations > The Boise Bicycle Project has been using Shopkeep for awhile now and we > dig it. It’s meant to run off an IPad, which makes it handy for events and > more mobile stuff. Also has an employee timekeeping feature that we use. > > I do think we’re using it to it’s full potential but it has some tracking > features that we use for a lot of our programs. Let me know if you have > specific questions I can help with. > > On Tue, Jan 30, 2018 at 12:45 PM David Oliver <nowhere3(a)gmail.com> wrote: > >> It depends a lot on what you want out of a POS. Are things like inventory >> management important? Do you want to run reports from within the program? >> Do you need it to do accounting/timesheets/staff pay? Do you need it to >> take credit/debit payments for you or are you going to get your own >> machine? Do you want a piece of software that will also track repairs? >> >> Lightspeed or Ascend are generally the two top things (More than just >> POS) that for profit bike shops use. Square is pretty common as a basic >> POS/credit card processor at bike co-ops from what I've seen. There's also >> Clover which seems close to Square but I haven't touched that before. >> Quickbooks is great for accounting/running reports but is horrible as a POS. >> >> On Tue, Jan 30, 2018 at 4:56 PM, Phoenix Bikes <phoenixbikes(a)gmail.com> >> wrote: >> >>> Hi everyone, >>> >>> I don't think this has been asked about for a while so here goes: >>> >>> Phoenix Bikes is moving to a new space and would like to use this >>> opportunity to switch out point-of-sale (POS) systems. Any recommendations? >>> >>> Thanks in advance, >>> >>> Meg >>> >>> *Meg Rapelye, MSW* >>> Executive Director, Phoenix Bikes >>> 4200 S. Four Mile Run Drive >>> Arlington, VA 22206 >>> Bike Shop: 703-575-7762 <(703)%20575-7762> >>> Cell: 703-350-3843 <(703)%20350-3843> >>> Web: www.phoenixbikes.org >>> Facebook: https://www.facebook.com/phoenixbikesVA/ >>> Twitter: https://twitter.com/PhoenixBikes >>> Instagram: phoenix_bikes <https://www.instagram.com/phoenix_bikes/> >>> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives. >>> org/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives. >> org/options.cgi/thethinktank-bikecollectives.org >> >> -- > Ride On! > > Jimmy Hallyburton > Founder / Executive Director > Boise Bicycle Project > (208)-429-6520 <(208)%20429-6520> > 1027 Lusk St Boise, ID 83706 > www.boisebicycleproject.org > > > > Explore some of the BBP Journey in my TEDx Talk on Moving at the Speed of > Discovery <https://youtu.be/yDubr-RjlCE?t=6s>! > > > ---------- Forwarded message ---------- > From: Phil Graff <pmgraff(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: phoenixbikes(a)gmail.com > Bcc: > Date: Tue, 30 Jan 2018 21:49:02 -0600 > Subject: Re: [TheThinkTank] Point of Sale Recommendations > The Bike Project of Urbana-Champaign (Illinois) has been using Square for > over five years now. We like it for the following reasons: > > - No monthly fees > - Transaction fees are 2.75% per swipe -- no 20 or 30 cent charge, > which is nice because sometimes people just buy a tube, so a $4 tube costs > us 11 cents in Square fees > - Can record cash transactions as well (no 2.75% taken). This > centralizes our record-keeping. > - Cloud-driven, so good at both of our locations (we have two shops, > one community and one University). Also good for mobile setups, if you have > one. We've also done an art show where we accepted payments through an > iPhone at the gallery. > > We are using iPads in secure enclosures with receipt printers wired to a > cash drawer. It was an investment in hardware, but worth it as it has saved > us so much time vs filling out paper pads, in addition to saving time for > accounting and providing us with numbers to use for business reporting. > Users seem to like it, and if they've shopped elsewhere with Square it will > remember their email. Maybe 1 out of 5 people max want a paper receipt; > most are satisfied with an email or no receipt, so it keeps paper costs > down and reduces waste. > > There are probably some other great solutions out there, but in 2012 this > was best in class for our needs. The only feature I really want would be to > have an API where it can tie into other apps or allow for embedding on a > web page (especially for donations). We do accept donations through the > Square Online Store, but it's a clunky solution at best -- at least how we > have it set up. > > Cheers, > Phil > Volunteer, The Bike Project of Urbana-Champaign > > > On Tue, Jan 30, 2018 at 9:07 PM, Jimmy Hallyburton < > jimmy(a)boisebicycleproject.org> wrote: > >> The Boise Bicycle Project has been using Shopkeep for awhile now and we >> dig it. It’s meant to run off an IPad, which makes it handy for events and >> more mobile stuff. Also has an employee timekeeping feature that we use. >> >> I do think we’re using it to it’s full potential but it has some tracking >> features that we use for a lot of our programs. Let me know if you have >> specific questions I can help with. >> >> On Tue, Jan 30, 2018 at 12:45 PM David Oliver <nowhere3(a)gmail.com> wrote: >> >>> It depends a lot on what you want out of a POS. Are things like >>> inventory management important? Do you want to run reports from within the >>> program? Do you need it to do accounting/timesheets/staff pay? Do you need >>> it to take credit/debit payments for you or are you going to get your own >>> machine? Do you want a piece of software that will also track repairs? >>> >>> Lightspeed or Ascend are generally the two top things (More than just >>> POS) that for profit bike shops use. Square is pretty common as a basic >>> POS/credit card processor at bike co-ops from what I've seen. There's also >>> Clover which seems close to Square but I haven't touched that before. >>> Quickbooks is great for accounting/running reports but is horrible as a POS. >>> >>> On Tue, Jan 30, 2018 at 4:56 PM, Phoenix Bikes <phoenixbikes(a)gmail.com> >>> wrote: >>> >>>> Hi everyone, >>>> >>>> I don't think this has been asked about for a while so here goes: >>>> >>>> Phoenix Bikes is moving to a new space and would like to use this >>>> opportunity to switch out point-of-sale (POS) systems. Any recommendations? >>>> >>>> Thanks in advance, >>>> >>>> Meg >>>> >>>> *Meg Rapelye, MSW* >>>> Executive Director, Phoenix Bikes >>>> 4200 S. Four Mile Run Drive >>>> Arlington, VA 22206 >>>> Bike Shop: 703-575-7762 <(703)%20575-7762> >>>> Cell: 703-350-3843 <(703)%20350-3843> >>>> Web: www.phoenixbikes.org >>>> Facebook: https://www.facebook.com/phoenixbikesVA/ >>>> Twitter: https://twitter.com/PhoenixBikes >>>> Instagram: phoenix_bikes <https://www.instagram.com/phoenix_bikes/> >>>> >>>> >>>> ____________________________________ >>>> >>>> The ThinkTank mailing List >>>> >>>> Unsubscribe from this list here: http://lists.bikecollectives.o >>>> rg/options.cgi/thethinktank-bikecollectives.org >>>> >>>> >>>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> -- >> Ride On! >> >> Jimmy Hallyburton >> Founder / Executive Director >> Boise Bicycle Project >> (208)-429-6520 <(208)%20429-6520> >> 1027 Lusk St Boise, ID 83706 >> www.boisebicycleproject.org >> >> >> >> Explore some of the BBP Journey in my TEDx Talk on Moving at the Speed >> of Discovery <https://youtu.be/yDubr-RjlCE?t=6s>! >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > -- B!KE: The Peterborough Community Bike Shop 293 George St, Peterborough ON (705) 775-7227 communitybikeshop.org

1 0

Fwd: Portland Sunday Parkways Program Manager Position Now Posted
by Angel York 29 Jan '18

29 Jan '18

---------- Forwarded message ---------- From: Ginenthal, Linda <Linda.Ginenthal(a)portlandoregon.gov> Date: Mon, Jan 29, 2018 at 1:29 PM Subject: Portland Sunday Parkways Program Manager Position Now Posted To: "Ginenthal, Linda" <Linda.Ginenthal(a)portlandoregon.gov> Hello Open Streets friends - I’m retiring, and I would love to see my position filled with someone great from our Open Streets network! The job announcement is now posted as Program Manager for the Active Transportation and Safety Division <https://www.governmentjobs.com/careers/portlandor/jobs/1965216/active-trans…>. Please get this out to your networks. Here is the intro to the job announcement: The City of Portland is seeking an Active Transportation Programs Manager in the Portland Bureau of Transportation (PBOT). The Programs section conducts culturally responsive outreach and education programs that encourage individuals to bike, walk, take transit, carpool, and car share in order to increase Portland's transportation system efficiencies and community health. The Active Transportation Programs Manager is responsible for leading the work of staff engaged in developing, implementing the Portland Sunday Parkways Open Streets program, SmartTrips individualized marketing Transportation Demand Management (TDM) program, and a variety of other Livable Streets, outreach and equity programs. These programs are designed to further active transportation and safety goals of dramatically increasing the percentage of trips made by walking, bicycling, transit and carpooling. The successful candidate will manage an innovative, collaborative team of TDM specialists developing strategies and techniques for changing transportation behaviors. The work requires strong communication and management skills developing sophisticated work and program plans in conjunction with their team of TDM professional staff. The Programs Section activities are often highly visible to City leadership and/or the general public. The position is responsible for significant partnership and sponsorship development as well as budget and resource acquisition and management. Candidates with experience working with diverse community partners and constituencies are desired. I will be working with my team to make sure there is a smooth transition with a new Programs Manager. Thanks for helping us find a terrific pool of candidates. Sincerely, Linda Ginenthal Programs Manager City of Portland Bureau of Transportation 1120 SW 5th Avenue, 8th floor <https://maps.google.com/?q=1120+SW+5th+Avenue,+8th+floor%C2%A0+%0D+Portland…> Portland OR 97204 <https://maps.google.com/?q=1120+SW+5th+Avenue,+8th+floor%C2%A0+%0D+Portland…> (503) 823-5266 linda.ginenthal(a)portlandoregon.gov PortlandSundayParkways.org *Make a donation online * *www.portlandoregon.gov/transportation/sundayparkways* <http://www.portlandoregon.gov/transportation/sundayparkways> *Visit us on Facebook **www.facebook.com/portlandsundayparkways* <http://www.facebook.com/portlandsundayparkways> *The City of Portland complies with all non**-**discrimination, Civil Rights laws including Civil Rights Title VI and ADA Title II. To help ensure equal access to City programs, services and activities, the City of Portland will reasonably modify policies/procedures and provide auxiliary aids/services to persons with disabilities. Call 503-823-5185 <(503)%20823-5185>, TTY 503-823-6868 <(503)%20823-6868> or Oregon Relay Service: 711 with such requests, or visit **http://bit.ly/13EWaCg* <http://bit.ly/13EWaCg>

1 0

Re: [TheThinkTank] Thethinktank Digest, Vol 136, Issue 20
by Lawrence Mohammed 26 Jan '18

26 Jan '18

Hi Cyclista Nicholas, the 'lecture' to me just read like a well intentioned bit of advice from someone knowledgeable who wanted to share this, I'm assuming so that we can all maintain tool longevity in our workshops/projects and not damage customers bikes :-) Warmest regards, *Lawrence Mohammed* Director & Head Mechanic Pro Bike Service C.I.C. *+44 (0)77 222 58587* *probikeservice.co.uk <https://probikeservice.co.uk>* *facebook.com/probikeservice <https://www.facebook.com/professionalbikeservice>* /[Location, NOT delivery address] Pro Bike Service C.I.C. Mobile Garden City Olympic Village London E20 1GW / On 23/01/18 21:06, thethinktank-request(a)lists.bikecollectives.org wrote: > > Cyclista Nicholas

2 1

Budget for earn a bike program
by rebecca owens 25 Jan '18

25 Jan '18

Hi all, we are writing a grant, and we need a pro forma budget for our Earn a Bike program. Alternately, does anyone have a budget for a Girls in Action repair, mechanics, safety class? Thanks, Rebecca Link :: Founding Director https://linkvt.wordpress.com 🐾

2 2

Re: [TheThinkTank] Tool Board Fashion Show: Strut Your (Tool Board's) Stuff!
by christopher＠holisticcycles.com 22 Jan '18

22 Jan '18

3 2

Hiring for Program Manager at Blackstone Bicycle Works in Chicago
by Matthew Searle 19 Jan '18

19 Jan '18

Hello ThinkTank Community! We are relaunching our search for candidates for the Program Manager position at Blackstone Bicycle Works here in Chicago after taking a break around the holidays. Attached is an updated job description that includes an increased salary range. Ideal candidates have significant managerial, business, and youth development experience. Involvement in the cycling community or industry is preferred. This is a full-time salaried position with benefits. Please share with your networks! With great appreciation, Matthew *P.S. Here <http://experimentalstation.org/blackstone> is more information about BBW and here <https://www.youtube.com/watch?v=cOmkGiEzbe4&t=2s> is a link to our "Stay In Your Lane" bike safety music video to share if you wish!* *=========* [image: Experimental Station logo_trans.png] Blackstone Bicycle Works Program Manager - Position Description (Revised 1/17/18) Program Mission Blackstone Bicycle Works is a youth education program of the Experimental Station, a 501(c)(3) non-profit. Blackstone Bicycle Works is a full-service non-profit bike shop dedicated to promoting ecological practices and empowering youths from Chicago's South Side, teaching mechanical skills, job skills, and business literacy to youths ages 8-18. BBW Program Manager Position Objective A successful Program Manager will effectively manage the youth program and business operations of the bicycle shop and will be responsible for leading short- and long-term program goals. In addition to carrying out managerial responsibilities, the Program Manager will guide and motivate staff and youth to meet program goals, provide mentoring to youth participants and assist staff, as needed. BBW Staffing Support The Program Manager is directed and supported by Experimental Station's Executive Director and Assistant Director. The Program Manager is also supported by a full-time Youth Services Coordinator/Head Instructor, a full-time Customer Services Coordinator/Head Mechanic, 3-6 part-time staff, and program volunteers. In addition, Blackstone Bicycle Works is supported by Experimental Station administrative and communications staff. The ideal candidate has significant management, business, and youth development experience. Involvement in the bicycling community or industry is also preferred. Applicants are encouraged to visit the bike shop in the coming weeks. The Blackstone Bicycle Works Program Manager’s duties include: - Program Staffing: develop individual staff and cultivate a strong staff team, oversee and approve staff schedules, manage and develop program volunteers. - Business Operations: monitor the program budget, ensure quality control, set and achieve sales and services goals, track and oversee inventory, ensure program funds and resources are properly used. - Youth Participation: Oversee recruitment, intake, retention, and parental communication; ensure youth engagement with the program and business operations. - Curriculum: Facilitate development and implementation of a bicycle-based curriculum with Youth Services and Customer Services Coordinators. - Data Management: Oversee and manage program data and documentation such as participation rosters, youth work logs, skill sheets, and apron awards. - Project Management: Provide oversight and administrative support for internships and externships, college advising, career exploration, the cyclocross team, and other initiatives. - Growth Strategy: Support broader program growth by developing partnerships and fundraising in collaboration with the Executive Director and Assistant Director. - Facilities Management: Manage use of program spaces, equipment, and supplies. - Program Safety: Maintain a safe and positive learning environment for youth participants, staff, and other members of the Experimental Station community. - Program Representative: Be a strong and professional representative of Blackstone Bicycle Works and Experimental Station and a positive role model for Blackstone youth participants. Criteria and qualifications of preferred candidates: - Skills and Abilities: - Community Engagement: Able to communicate and relate with a diversity of youth, adults, staff, and other groups. Has demonstrated a passion for serving under-resourced communities. - Work Styles: Able to work independently and as part of a team; take initiative and solve problems; remain calm under pressure. Has outstanding customer service, listening, and de-escalation skills. - Administrative Strength: Able to organize and execute plans; effectively use email, google apps, and social media. Has strong verbal and written communication skills. Point of Sale system experience preferred. - Must be physically and mentally able to perform essential functions, such as to effectively engage in activities with youth, as well as manage and maintain the program’s supplies, equipment, and facilities. This is a full-time position with a salary of $43-46k commensurate with experience. Health benefits and paid time-off are also included. Final candidates are subject to a background check. Email your cover letter, resume, and two references to jobs(a)experimentalstation.org with your name and “BBW Program Manager Position” in the subject. This position will remain open until filled. It is the policy of Experimental Station to ensure equal employment opportunity without discrimination or harassment on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, marital status, citizenship, genetic information, or any other characteristic protected by law. ______________ Matthew T. Searle Assistant Director Experimental Station 6100 S. Blackstone Ave. Chicago, IL 60637 USA matthew(a)experimentalstation.org office: 773.241.6044; alt: 773.270.2502 experimentalstation.org <http://www.experimentalstation.org>

1 0

Fwd: Delivery Status Notification (Failure)
by Tigre Bici 19 Jan '18

19 Jan '18

Subject: Women and girls exclusive oriented programs Hello! We have been trying to pin down some ideas on women and girls only programs and we will like to see any of the ones you are working on your communities. Also do you use any kind of metric to see the impact of these programs? We will appreciate a lot any info. Saludos R.

1 0

Re: [TheThinkTank] Tool Board Fashion Show: Strut Your (Tool Board's) Stuff!
by Sam Haraldson 18 Jan '18

18 Jan '18

> > Hey! We're going to redesign our tool boards soon, and want to look at >> yours for inspiration. Show 'em off! The winner of the most fly tool board >> gets a group serenade at B!B! >> >> Bozeman Bike Kitchen - Bozeman, MT We have a half dozen or so of these tables, each with color-coordinated tools, stand, pump, garbage/recycling, et al which makes it easy to see when something's missing or when someone doesn't know where something goes. We copied the idea nearly verbatim from the good people down at the SLC Bike Collective. SLC Bicycle Collective - Salt Lake City, UT - Sam -- http://bozemanbikekitchen.org

7 7

Tool Board Fashion Show: Strut Your (Tool Board's) Stuff!
by Josh Bisker 17 Jan '18

17 Jan '18

Hey! We're going to redesign our tool boards soon, and want to look at yours for inspiration. Show 'em off! The winner of the most fly tool board gets a group serenade at B!B! (Specifically, we're going to pare down the number of tools on each board to the basics+, but show us everything ya got!) Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

4 3

Tool Board Fashion Show
by Bob Giordano 16 Jan '18

16 Jan '18

Free Cycles Missoula approach, for now: -the 12 open and free public stands each have the following: 7,8,9,10,13,14,15mm wrenches; screw drivers and plyers (we used to have 7-17mm, yet 11,12,16 not used much) -we have a central board with many more tools that are shared, like BB, Headset, cone wrenches, etc. (we keep an eye out for improper use and an ear out for the hammer). we only have 13, 15, 17 cone wrenches here. (plus 17mm box wrenches) -we have a more secluded board with specialty tools, and folks need to ask us -we have lube, grease, cleaner, rags, allen wrenches all in the middle of the shop. we half jokingly refer to this spot as the watering hole. everyone needs to come to this spot and bump into one another and say hello. -one bigger board/public station has 7-17mm, plus english wrenches. this board is more for kid bikes and cruisers, which tend to need more wrenches. (a few other boards have 1/2" wrench with a note for use.) -- Bob Giordano Free Cycles Missoula 10AM-6PM Tues-Sat, www.freecycles.org Missoula Institute for Sustainable Transportation www.strans.org, mist(a)strans.org, 406.830.7676 --- Josh Bisker wrote: Hey! We're going to redesign our tool boards soon, and want to look at yours for inspiration. Show 'em off! The winner of the most fly tool board gets a group serenade at B!B! (Specifically, we're going to pare down the number of tools on each board to the basics+, but show us everything ya got!) Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

2 1

Re: [TheThinkTank] Thethinktank Digest, Vol 136, Issue 11
by Tegan Moss [B!KE] 16 Jan '18

16 Jan '18

We built new benches when we moved two years ago. We shadow board all tools and colour code them to the bench. Makes putting things away easy for people new to the shop. All five benches have the same tools and layout. Holes in the side of the bench for penetrant, degreaser, etc. Screw drivers are also in the bench which people have a hard time finding. Pretty pretty with how these work for us! On Jan 15, 2018 4:06 PM, <thethinktank-request(a)lists.bikecollectives.org> wrote: Send Thethinktank mailing list submissions to thethinktank(a)lists.bikecollectives.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.bikecollectives.org/listinfo.cgi/thethinktank- bikecollectives.org or, via email, send a message with subject or body 'help' to thethinktank-request(a)lists.bikecollectives.org You can reach the person managing the list at thethinktank-owner(a)lists.bikecollectives.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Thethinktank digest..." Today's Topics: 1. Re: job posting (Jane Halliday) 2. Tool Board Fashion Show: Strut Your (Tool Board's) Stuff! (Josh Bisker) ---------- Forwarded message ---------- From: Jane Halliday <jghalliday(a)aol.com> To: cyclista(a)inventati.org, thethinktank(a)lists.bikecollectives.org Cc: Bcc: Date: Mon, 15 Jan 2018 14:16:27 -0500 Subject: Re: [TheThinkTank] job posting Thanks Nicholas! Sent from AOL Mobile Mail ------------------------------ On Saturday, January 13, 2018 cyclista <cyclista(a)inventati.org> wrote: Jane, You did it as it usually is done. You post the job description and the means of submission. Essentially you're inviting anyone on the list to apply, or anticipating that they will put the word out to qualified people they know who might not be on the list. -cyclista Nicholas On 2018-01-09 19:36, Jane Halliday wrote: > Hi ThinkTank, > > > I'm with Falls City Community BikeWorks in Louisville KY. We have > opened a search for an Executive Director and I'd like to get the word > out to the wiki bike community. Not exactly sure how to go about this > - do you all distribute the info or am I supposed to do something > particular to make that happe? I'm pasting the job description below. > Please let me know if I need to do anything and THANK YOU.. > > > Jane Halliday > > > > > > > > > > > > Executive Director > Falls City Community BikeWorks Seeks Innovative Executive Director > Part-time position available for exceptional candidate to help lead > Louisville’s non-profit bike co-operative with a vision for the future > and collaboration with dedicated and tenured volunteers. > Reporting to the Board of Directors, the Executive Director (ED) will > have overall strategic and operational responsibility for Falls City > Community BikeWorks programs, fundraising activities, expansion and > execution of its mission. The ideal candidate will initially develop > deep knowledge of core programs and operations before creating a > strategic plan to carry us into the future. > > Roles & Responsibilities > Leadership & Management: > > Ensure ongoing program excellence, program evaluation, and consistent > quality of finance and administration, fundraising, communications, > and systems > > Recommend timelines and resources needed to achieve the strategic > goals approved by the board. > > Develop, maintain, and support a strong Board of Directors; seek and > build board involvement with strategic direction > > Recruit, develop, and retain FCCB volunteers. > > Ensure effective systems to track progress, and regularly evaluate > program components, to measure successes that can be effectively > communicated to the board, funders, and other constituents. > > Fundraising & Communications: > > Expand local revenue-generating and fundraising activities to support > existing program operations. > > Improve all aspects of communications—from web and social media > presence to external relations -- with the goal of creating a stronger > brand. > > Use external presence and relationships within Louisville to gain new > opportunities. > > Planning & New Business: > > Design an aggressive comprehensive fundraising plan, including annual > campaign. > > Develop strategic plan with Board of Directors input, executable over > the next 2 years. > > Build and expand partnerships with corporations, political and > community leaders. Deepen relationships with funders to create > sustainable funding resources. > > > > Qualifications > The ED will be thoroughly committed to FCCB mission. All candidates > should have leadership and relationship management experience. > Specific requirements include: > > Bachelor degree, ideally in leadership, management or communications > or at least 2 years of fundraising experience; ability to point to > specific examples of having developed and operationalized strategies > > Unwavering commitment to quality programs and data-driven program > evaluation > > Proficiency in organizational management with the ability to coach and > manage staff and volunteers, set and achieve strategic objectives, and > manage a budget > > Experience working with volunteers and/or a Board of Directors with > the ability to cultivate existing board member relationships > > Strong marketing, public relations, and fundraising experience with > the ability to engage a wide range of stakeholders and cultures > > Strong written and verbal communication skills; a persuasive and > passionate communicator with excellent interpersonal and > multidisciplinary project skills > > Action-oriented, entrepreneurial, adaptable, and innovative approach > to business planning > > Ability to work effectively in collaboration with diverse groups of > people > > Passion, idealism, integrity, positive attitude, mission-driven, and > self-directed > > Dedicate 20-25 hours per week to the mission > > Other duties as needed > > > > Salary range: $20,000 > Applicants: Please submit a letter of application, a resume, and > three professional references in PDF format to fccbikeworks(a)gmail.com. > > > > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: > http://lists.bikecollectives.org/options.cgi/thethinktank- bikecollectives.org ---------- Forwarded message ---------- From: Josh Bisker <jbisker(a)gmail.com> To: The Think Tank <thethinktank(a)lists.bikecollectives.org> Cc: Bcc: Date: Mon, 15 Jan 2018 15:44:05 -0500 Subject: [TheThinkTank] Tool Board Fashion Show: Strut Your (Tool Board's) Stuff! Hey! We're going to redesign our tool boards soon, and want to look at yours for inspiration. Show 'em off! The winner of the most fly tool board gets a group serenade at B!B! (Specifically, we're going to pare down the number of tools on each board to the basics+, but show us everything ya got!) Josh Bisker 914-500-9890 <(914)%20500-9890> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/> _______________________________________________ Thethinktank mailing list Thethinktank(a)lists.bikecollectives.org http://lists.bikecollectives.org/listinfo.cgi/thethinktank- bikecollectives.org

1 0

job posting
by Jane Halliday 15 Jan '18

15 Jan '18

Hi ThinkTank, I'm with Falls City Community BikeWorks in Louisville KY. We have opened a search for an Executive Director and I'd like to get the word out to the wiki bike community. Not exactly sure how to go about this - do you all distribute the info or am I supposed to do something particular to make that happe? I'm pasting the job description below. Please let me know if I need to do anything and THANK YOU.. Jane Halliday Executive Director Falls City Community BikeWorks Seeks Innovative Executive Director Part-time position available for exceptional candidate to help lead Louisville’s non-profit bike co-operative with a vision for the future and collaboration with dedicated and tenured volunteers. Reporting to the Board of Directors, the Executive Director (ED) will have overall strategic and operational responsibility for Falls City Community BikeWorks programs, fundraising activities, expansion and execution of its mission. The ideal candidate will initially develop deep knowledge of core programs and operations before creating a strategic plan to carry us into the future. Roles & Responsibilities Leadership & Management: Ensure ongoing program excellence, program evaluation, and consistent quality of finance and administration, fundraising, communications, and systems Recommend timelines and resources needed to achieve the strategic goals approved by the board. Develop, maintain, and support a strong Board of Directors; seek and build board involvement with strategic direction Recruit, develop, and retain FCCB volunteers. Ensure effective systems to track progress, and regularly evaluate program components, to measure successes that can be effectively communicated to the board, funders, and other constituents. Fundraising & Communications: Expand local revenue-generating and fundraising activities to support existing program operations. Improve all aspects of communications—from web and social media presence to external relations -- with the goal of creating a stronger brand. Use external presence and relationships within Louisville to gain new opportunities. Planning & New Business: Design an aggressive comprehensive fundraising plan, including annual campaign. Develop strategic plan with Board of Directors input, executable over the next 2 years. Build and expand partnerships with corporations, political and community leaders. Deepen relationships with funders to create sustainable funding resources. Qualifications The ED will be thoroughly committed to FCCB mission. All candidates should have leadership and relationship management experience. Specific requirements include: Bachelor degree, ideally in leadership, management or communications or at least 2 years of fundraising experience; ability to point to specific examples of having developed and operationalized strategies Unwavering commitment to quality programs and data-driven program evaluation Proficiency in organizational management with the ability to coach and manage staff and volunteers, set and achieve strategic objectives, and manage a budget Experience working with volunteers and/or a Board of Directors with the ability to cultivate existing board member relationships Strong marketing, public relations, and fundraising experience with the ability to engage a wide range of stakeholders and cultures Strong written and verbal communication skills; a persuasive and passionate communicator with excellent interpersonal and multidisciplinary project skills Action-oriented, entrepreneurial, adaptable, and innovative approach to business planning Ability to work effectively in collaboration with diverse groups of people Passion, idealism, integrity, positive attitude, mission-driven, and self-directed Dedicate 20-25 hours per week to the mission Other duties as needed Salary range: $20,000 Applicants: Please submit a letter of application, a resume, and three professional references in PDF format to fccbikeworks(a)gmail.com.

2 2

electronic volunteer sign up
by Jesse Cooper 14 Jan '18

14 Jan '18

Hey folks! Our Community Bikes in Vancouver, Canada, is looking for a way for volunteers to electronically sign up. We have some limit to how many volunteers can access the space at the same time each day, we tend to spread the labour around a bit, and we currently have used a few online services that can link to our website, but doesn't link with our current staffing calendar and event calendar. For that we are simply using a google calendar. But I'm wondering if anyone has had success with some type of really easy to use interface, that generates reports for metrics 'n stuff, and that is very user simple. hmm? Jesse

3 6

Fwd: Re: Patron Bill of Rights (consider adopting)
by cyclista＠inventati.org 13 Jan '18

13 Jan '18

> _< forgot to cc the list again -cyclista Nicholas -------- Original Message -------- Subject: Re: [TheThinkTank] Patron Bill of Rights (consider adopting) Date: 2018-01-10 15:14 From: cyclista(a)inventati.org To: Angel York <aniola(a)gmail.com> Everything else in it looks like a good idea. Just those two parts are off base. Our policy is that we have no right to control bikes brought in by participants, and that should be morally obvious. Where we do have rights is with the bikes and parts we hold, and the extreme importance of _not_dying_in_traffic_ incentivizes rules and restrictions about the condition of bikes rolling out into the street. We all probably remember some lofty gilded time in some anarchic community shop in a garage or low rent strip mall where the craziest bikes were built and of the street rogues that inhabited the place flew out the door on those mobile experiments without a care. But now I'm in a place where people's children come to my shop with the intention of riding out the door and into the street, and over a decade of experience has shown me that kids (and a lot of adults) too much of the time just don't care about functional brakes, or even understand how brakes should feel, even when the culture at the shop is pervaded by common sense, patient instruction, and good examples. Drawing hard lines about bikes we legally own and have full rights to exercise control over makes unassailable sense considering that lives are at stake. Similarly, while some shops may have donors willing to dole out tools limitlessly, more do not. I don't hold that our shops are effective without tools, or that participants own the expensive tools that others fought hard to gain. There has to be an understanding on the part of the participants that they have a responsibility not to damage the entity that shelters, educates, and empowers them. Not everyone just naturally takes care of free things. Most participants don't intuit that the specialized free remover wrench cost $30 or that the Tire seating tool is rare and costs over $50. It isn't anyone's right to abuse or mishandle the shop's tools. I think these things are all self apparent. The spirit of these two lines seems more about not being dominated by pushy condescenders, mansplainers, or the like, and about guaranteeing the promise of power and freedom. By asserting the participant is the owner. At our shop we assert that very thing emphatically. We just don't do it before the participant has a safe bike in their possession and before they know the difference between a suicide lever and a disc brake, or to put a finer point on it, between aluminum rims whose walls are about to cave in and ones that have years of life left in them. Anyway, the lines both could probably be replaced by a single one referencing something reaffirming the purpose of the end goal, that being the participants ultimate (rather than immediate) empowerment. I'm a bit too tired atm to come up with some good wording for it. But attached is our participant policy. That having a "policy" rather than "bill of rights" focuses on the authority of the shop more than the autonomy of the participants is not a detail that is lost one me, but I still think you might find our premises useful. Sorry this whole thing is so tl;dr. -Cyclista Nicholas On 2018-01-06 13:37, Angel York wrote: > I would love to hear your suggested adaptations, because I think > something > along the goals of this Patron Bill of Rights is HUGELY important and a > worthy topic of discussion for any community bike shop that purports to > teach its patrons. > > On Sat, Dec 23, 2017 at 11:24 PM, <cyclista(a)inventati.org> wrote: > >> What about the first two? I would say they need greater detail. >> >> At our shop we don't let bikes being built at the shop leave without >> passing a safety check, which might conflict with the first one. And >> without finer-grained detail on the second one, shop tools could get >> broken >> when participants use the wrong tool for a job, or use the correct >> tool but >> in the wrong way. >> >> -Cyclista Nicholas >> >> >> On 2017-12-16 18:34, Angel York wrote: >> >>> This is a fantastic sign that illustrates excellent teaching >>> practices, >>> and >>> many shops that don't have something similar would do well, in my >>> opinion, >>> to include something similar. >>> >>> As a patron of SPOKELAND, you have the right to the following >>> >>> - To pursue your own goals for your own bike >>> - To be in control of the tools used on your bike >>> - To always be asked before someone touches your bike >>> - To ask & receive assistance from shop staff >>> - To work on your bike in a SAFER SPACE [there is also a standard >>> safer >>> space agreement] >>> - To be supported in your learning >>> - To learn with staff >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: >>> http://lists.bikecollectives.org/options.cgi/thethinktank-bi >>> kecollectives.org >>> >>

1 0

Liability Waivers
by John Kovalchik 11 Jan '18

11 Jan '18

Looking for some examples of liability waivers for repairs and/or totally gifted bikes. I work with a group of folks that flip bikes and do repairs for individuals in need. Unfortunately we are only able to operate at our space for a few hours at a time and usually cannot store or take bikes over night. Due to the severe disrepair of some of the bikes we come across and our limited time with them often we are not able to get them in the complete repair that we would hope. Any co ops or collectives out there use these? What should or should not be included? Thanks

8 7

Educational videos
by Tigre Bici 08 Jan '18

08 Jan '18

Hello! We wish you all have and excellent 2018. We are wondering if any of you use videos to explain bike mechanics on your shops/collectives, if so: Do you have a especial format on them? Are you planning on making some? Do you think it will work on the shop? Maybe on other language besides english? We are working on creating some videos to help on learning the tools/skills and will like to know if the vids wlll be helpful for you. So, hit us up if you are interested Regards R.

2 1

bulk service/repair contracts
by Geoff Heath 05 Jan '18

05 Jan '18

Hey folks! I'm looking at drawing up an annual tune-up/repair contract with a school division for their 80 bike fleet and I've never written up anything like this previously. I couldn't find any examples of bulk repair contracts on thinktank and am wondering if anyone has an example document I can riff off of, or experience around this. I imagine it's not the sort of thing that I'd want to miss anything important and end up in the hole on. Would greatly appreciate any advice that anyone could give. Thanks! Geoff Heath, Education Director The Winnipeg Repair Education N' Cycling Hub 1057 Logan Ave. Winnipeg, MB R3E 3N8 Treaty 1 Territory, Homeland of the Metis Nation http://www.thewrench.ca 204-296-3389

1 0

Boise Bicycle Project, Hiring Shop Operations Manager and Prison Program Coordinator.
by Jimmy Hallyburton 04 Jan '18

04 Jan '18

We've got two very exciting and impactful positions to fill at the Boise Bicycle Project and hope a few of you out there might be interested. Check out the job posting and videos below for more info about the positions. I hope to be talking to some of you soon. *Shop Operations Manager: <http://www.boisebicycleproject.org/shop-operations-manager>* In 2017 BBP's team of dedicated volunteers and staff put over 1700 bicycles back onto the streets of Boise, including 800 to kids in our programs. We have 600 active members using the shop on a regular basis and another 1400 folks who use the shop as "walk/ride-ins." We have 14 staff members (5 full time) that operate our programs and foster an empowering and educational atmosphere to the Boise community and beyond regardless of income. The Shop Operations Manager oversees the daily activities that make all of the above possible for our community members, and the sales that provide funding for our programs. This is a big job with a lot of responsibility and limitless potential for impact. Full time with full benefits. See full *job posting* <http://www.boisebicycleproject.org/shop-operations-manager> for all of the details. See *this video* <https://www.youtube.com/watch?v=D-v5vS-03gk> for a little more about BBP. * <http://www.boisebicycleproject.org/shifting-gears-coordinator>* *Shifting Gears Coordinator: <http://www.boisebicycleproject.org/shifting-gears-coordinator>* The Shifting Gears program is the BBP’s partnership program with the Idaho Department of Corrections. Shifting Gears teaches bicycle mechanics to incarcerated individuals and provides free adult bikes to program participants upon release. The program provides inmates with vocational skills, impactful opportunities, and community connection. Shifting Gears currently operates at the South Boise Women’s Correctional Center, partners with the East Boise Re-Entry Center at the BBP, and is starting a program at the Idaho State Men's Correctional Center. This is a 25-30 hour a week position, but we would consider full time hours for the right candidate. See full *job posting* <http://www.boisebicycleproject.org/shifting-gears-coordinator> for all of the details. See *this video <https://www.youtube.com/watch?v=4Knf-1AAqrU>* about our program at the South Women's Facility. Or *this video <https://www.youtube.com/watch?v=ZeZM0xzOyCc>* about our new program at the Women's East ReEntry Center. Or contact Jimmy(a)boisebicycleproject.org or 208-429-6520 for immediate questions. Ride On! Jimmy Hallyburton Founder / Executive Director Boise Bicycle Project (208)-429-6520 1027 Lusk St Boise, ID 83706 www.boisebicycleproject.org Explore some of the BBP Journey in my TEDx Talk on Moving at the Speed of Discovery <https://youtu.be/yDubr-RjlCE?t=6s>!

1 0

The Ogden Bicycle Collective is Hiring a Head Mechanic
by Danielle Fry 02 Jan '18

02 Jan '18

Hello all, Please spread the word that the Ogden Bicycle Collective (Ogden, Utah) is hiring a Head Mechanic. The position is year-round with a lot of potential. Pay is $12-14 DOE. Details here! <https://bicyclecollective.org/ogden-news/item/657-obc-is-hiring-a-head-mech…> Cheers, -- Danielle Fry Director Ogden Bicycle Collective 936 28th Street Ogden, UT 84403 801-997-0336

1 0

Happy New Year Everyone!
by cyclista＠inventati.org 31 Dec '17

31 Dec '17

We all do such wonderful and important work, and I'd like to wish very one of you the best for the new year. Here's to able spirits, exciting work, good times, and profound development for every one of us and our projects in 2018!!!! Ride On! ~cyclista Nicholas :)

1 0

Job Opporutnity:Education/Outreach Coordinator
by Andy Fry 29 Dec '17

29 Dec '17

*Send resumes or questions to andy(a)cycleproject.org <andy(a)cycleproject.org>* *Job Description *- Education, Outreach, and Advocacy Coordinator Time Commitment: 20 hours/week, three-month probationary period Compensation: $13.75 hourly Reports to: President, Board of Directors *Responsibilities*: The Education, Outreach and Advocacy Coordinator will be responsible for overseeing all the activities happening at or near the Topeka Community Cycle Project, at 801 NE Poplar. This person’s responsibilities will include, but may not be limited to, BLAST support and enhancement, bicycle safety educator, public outreach coordinator and local advocate for bicycling access and infrastructure. Any responsibilities listed here may be delegated if an appropriate party is identified. *BLAST Support and Enhancemen*t- providing support to PE instructors in implementing BLAST curriculum and implementing trailer and bike fleet scheduling to maximize use and availability of BLAST resources to Topeka and Shawnee County. *Bicycle Safety Educator*- providing educational programming and bicycle promotional events to spur bicycling activity by “interested, but concerned” potential bicycle riders; enhancing access and bicycle ridership in Topeka. *Public Outreach Coordinator*- providing educational and bicycle resources in remote and community hubs where there is interest in the community. Bringing bicycles and best safety practices to the neighborhoods of Topeka and Shawnee County through grassroots and community events and community locations. *Local Advocate-* participating in community discussions, committees on active transportation, bicycling and active wellness pursuits. Also reaching beyond traditional bicycle specific discussions and attending MTPO and other meetings and public forums to integrate bicycle perspectives into a larger transportation and city planning and development discussion . *Skills necessary*: -LCI certification: ability to complete League of American Bicyclists Traffic Skills and LCI Certification, as it’s offered, within 6 months. -Familiarity with current social media platforms and Microsoft Office and Adobe products -Comfort with speaking in front of groups and presenting new ideas in a group setting. -Coordinating and engaging volunteers, in addition to a willingness to help in seeking funds to keep the position and organization sustained on a perpetual basis. *Topeka Community Cycle Project, 801 NE Poplar St. Topeka KS 66606*

1 0

Patron Bill of Rights (consider adopting)
by Angel York 23 Dec '17

23 Dec '17

This is a fantastic sign that illustrates excellent teaching practices, and many shops that don't have something similar would do well, in my opinion, to include something similar. As a patron of SPOKELAND, you have the right to the following - To pursue your own goals for your own bike - To be in control of the tools used on your bike - To always be asked before someone touches your bike - To ask & receive assistance from shop staff - To work on your bike in a SAFER SPACE [there is also a standard safer space agreement] - To be supported in your learning - To learn with staff

3 2

What's New at Cycle-RE-Cycle
by Cycle-Re-Cycle 23 Dec '17

23 Dec '17

https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b… Facebook (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b… Twitter (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b… Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) BUILDING UPDATE - WE NEED YOUR HELP! We recently signed the papers on our new headquarters at 159 East Napier, and there is A LOT of work that needs to be done. In order for our new home to be up-and-running for next spring we have to raise $50,000 for much-needed building renovations. Donate to our New Building Fund today! (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) All donations will go directly to support our new building and are tax deductible. CYCLE-RE-CYCLE IN THE NEWS ** CYCLE-RE-CYCLE LANDS NEW, LARGER, HIGH VISIBILITY DIGS ------------------------------------------------------------ By Pat Moody | Posted December 1, 2017 As the song goes, “when I get knocked down, I get up again,” and that’s exactly the attitude and plan for our friends at Cycle-Re-Cycle of Benton Harbor. READ MORE (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** CYCLE-RE-CYCLE Recycles building ------------------------------------------------------------ By LOUISE WREGE - HP Staff Writer | Posted December 9, 2017 What started in the garages of two St. Joseph neighbors in 2010 soon blossomed into Cycle-Re-Cycle, which rented space on Main Street near the back of a parking lot in Benton Harbor for $1 a month. READ MORE (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) CALL FOR VOLUNTEERS MAKE A DIFFERENCE IN 2018 Join us in making 2018 an exciting year for Cycle-RE-Cycle. We need volunteers to help with everything from bike mechanics to social media and grant writing, just let us know how you can bring your talents to CRC! Start Volunteering (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) THANK YOU SHOUTOUTS!! ** POWELL CONSTRUCTION ------------------------------------------------------------ Powell Construction has been instrumental in securing our new building and getting it up-and-running. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** SCORE ------------------------------------------------------------ Score, a volunteer business mentoring organization has worked closely with CRC to secure our new building and get our fundraising efforts running smoothly. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** HOLT BOSSE ------------------------------------------------------------ Holt Bosse has lent their support and marketing expertise to our organization, getting us ready for the next phase of Cycle-RE-Cycle. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** BENTON HARBOR LIONS FOUNDATION ------------------------------------------------------------ We would like to say thank you for your generous grant funding of $500 to our building fund. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** HORIZON BANK ------------------------------------------------------------ Thank you so much to Horizon Bank for the funding for the purchase of our new building. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** PASSARO, KAHNE & TAYLOR LAW OFFICES, P.L.L.C ------------------------------------------------------------ Thank you to our friends at Passaro, Kahne & Taylor Law Offices, P.L.L.C for providing their law expertise to us as we purchased our new building. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** FREDERICK S. UPTON FOUNDATION ------------------------------------------------------------ We want to say thank you for your generous grant for building renovations. Visit Website (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ============================================================ ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) ** (https://cycle-re-cycle-swm.us15.list-manage.com/track/click?u=1e2651ac4b66b…) Copyright © 2017 CRC, All rights reserved. You are receiving this email because you made a purchase from Cycle-RE-Cycle. Our mailing address is: CRC P.O. Box 1022 Benton Harbor, MI 49023 USA Want to change how you receive these emails? You can ** update your preferences (https://cycle-re-cycle-swm.us15.list-manage.com/profile?u=1e2651ac4b66b1b63…) or ** unsubscribe from this list (https://cycle-re-cycle-swm.us15.list-manage.com/unsubscribe?u=1e2651ac4b66b…) . Email Marketing Powered by MailChimp http://www.mailchimp.com/monkey-rewards/?utm_source=freemium_newsletter&utm…

2 1

Displaying Freewheel & Cassette Tools, spline tree and helm pix
by Bob Giordano 15 Dec '17

15 Dec '17

Attached are pix of the 'Spline Tree' and 'Helm' I spoke of in last email Bob Giordano wrote: All sounds good, the only new thing I'll add is a handy 'tool' we made: welded the FR1 freewheel remover to a small steel plate, then bolted the plate to a wall, right next to our truing stands and cone wrenches. Several times a day it's used: push the wheel onto the tool, spin counterclockwise and off comes the free wheel. our 1st one lasted 2 years til too stripped, then made another. Other than that, all other FW, Cassette and BB removers are on a spinning carousel we call the 'spline tree'. -- Bob Giordano Free Cycles Missoula Shop: 732 S. 1st St. West, ph. 541.7284 10AM-6PM Tues-Sat, www.freecycles.org Missoula Institute for Sustainable Transportation www.strans.org, mist(a)strans.org, 406.830.7676 > On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com > <mailto:jbisker@gmail.com>> wrote: > Heyyo! I've been in co-ops where they have neat ways of displaying the > various freewheel and cassette tools, like on a board next to the hub types > they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled > unhelpfully all together in a bin like we do?) Send a pic of what you got! > > tldr: show us your rad way of housing freewheel/cassette tools that makes it > easy for folks to find the right one. > > EXTRA CREDIT: same question re bottom bracket tools! > > xoxo > > Josh > > > Josh Bisker > 914-500-9890 <tel:(914)%20500-9890> > New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> > 596 Acres <http://596acres.org/> > Bindlestiff Family Cirkus <http://bindlestiff.org/>

1 0

Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette Tools (Nicole Muratore)
by Nicole Muratore 13 Dec '17

13 Dec '17

In a corner of our shop we keep specialty or large tools on both a labeled board and in toolboxes. For patrons new to our shop or unfamiliar with the tools, volunteers usually grab the tools. Otherwise, we keep everything labeled and (hopefully) easy enough for folks to find. Pics attached! Cheers, Nicole Muratore Bike Saviours Collective, Inc. http://www.bikesaviours.org Admin / Volunteer Coordinator (602) 429-9369 On Wed, Dec 13, 2017 at 2:07 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. An Easy One! Displaying Freewheel & Cassette Tools (Josh Bisker) > 2. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Ainsley Naylor) > 3. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Gabriel Trainer) > 4. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Jean-Fran?ois Caron) > > > ---------- Forwarded message ---------- > From: Josh Bisker <jbisker(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 01:31:25 -0500 > Subject: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette Tools > Heyyo! I've been in co-ops where they have neat ways of displaying the > various freewheel and cassette tools, like on a board next to the hub types > they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled > unhelpfully all together in a bin like we do?) Send a pic of what you got! > > tldr: show us your rad way of housing freewheel/cassette tools that makes > it easy for folks to find the right one. > > EXTRA CREDIT: same question re *bottom bracket tools!* > > xoxo > > Josh > > > Josh Bisker > 914-500-9890 <(914)%20500-9890> > New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> > 596 Acres <http://596acres.org/> > Bindlestiff Family Cirkus <http://bindlestiff.org/> > > > ---------- Forwarded message ---------- > From: Ainsley Naylor <needleandthread(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 10:41:47 -0500 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > Because these are the type of tools which are SMALL, important, easy to > break/strip, and not always cheap (hello, did you order a Maillard french > freewheel tool off of the internet because they are super hard to find???) > we DO keep ours in a closed bin on the table with our vices. > Bottom bracket tools are actually kept in our special tool area at the > front of the shop because if people can grab stuff they are more likely to > break it :( Hell even volunteer who do know how to use these tools properly > still abuse and break them. > > I guess generally we expect that volunteer will determine what tool is > required for a repair and retrieve and explain it, rather than people > figuring it out/finding it for themselves.... > > NOT THE ANSWER YOU WANTED SORRY JOSH!!!! > > Ainsley. > > On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: > >> Heyyo! I've been in co-ops where they have neat ways of displaying the >> various freewheel and cassette tools, like on a board next to the hub types >> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >> unhelpfully all together in a bin like we do?) Send a pic of what you got! >> >> tldr: show us your rad way of housing freewheel/cassette tools that makes >> it easy for folks to find the right one. >> >> EXTRA CREDIT: same question re *bottom bracket tools!* >> >> xoxo >> >> Josh >> >> >> Josh Bisker >> 914-500-9890 <(914)%20500-9890> >> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >> 596 Acres <http://596acres.org/> >> Bindlestiff Family Cirkus <http://bindlestiff.org/> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > ---------- Forwarded message ---------- > From: Gabriel Trainer <getrainer(a)bikefarm.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 11:59:24 -0800 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > At Bike Farm we have all of the freewheel and cassette tools laid out on a > magnetic strip so you can see the different shapes easily. Still a guess > and check method, but better than a bin of tools thrown together. > Gabriel > > On Dec 13, 2017 7:41 AM, "Ainsley Naylor" <needleandthread(a)gmail.com> > wrote: > >> Because these are the type of tools which are SMALL, important, easy to >> break/strip, and not always cheap (hello, did you order a Maillard french >> freewheel tool off of the internet because they are super hard to find???) >> we DO keep ours in a closed bin on the table with our vices. >> Bottom bracket tools are actually kept in our special tool area at the >> front of the shop because if people can grab stuff they are more likely to >> break it :( Hell even volunteer who do know how to use these tools properly >> still abuse and break them. >> >> I guess generally we expect that volunteer will determine what tool is >> required for a repair and retrieve and explain it, rather than people >> figuring it out/finding it for themselves.... >> >> NOT THE ANSWER YOU WANTED SORRY JOSH!!!! >> >> Ainsley. >> >> On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: >> >>> Heyyo! I've been in co-ops where they have neat ways of displaying the >>> various freewheel and cassette tools, like on a board next to the hub types >>> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >>> unhelpfully all together in a bin like we do?) Send a pic of what you got! >>> >>> tldr: show us your rad way of housing freewheel/cassette tools that >>> makes it easy for folks to find the right one. >>> >>> EXTRA CREDIT: same question re *bottom bracket tools!* >>> >>> xoxo >>> >>> Josh >>> >>> >>> Josh Bisker >>> 914-500-9890 <(914)%20500-9890> >>> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >>> 596 Acres <http://596acres.org/> >>> Bindlestiff Family Cirkus <http://bindlestiff.org/> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > ---------- Forwarded message ---------- > From: "Jean-François Caron" <jfcaron3(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 14:54:38 -0600 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > At the Bike Kitchen in Vancouver (from what I recall, having left over a > year ago), we only had the common Shimano-style freewheel and cassette > tools. The freewheel tool has a hole in it, so we just put it on a nail in > the wall, the cassette tool has a steel rod, so we stuck it in a hole in > the wall next to the aforementioned nail. > > Anything other than the standard Shimano-style tools, you had to ask a > mechanic to get it behind the counter. This is both because it's less > confusing for newbies who 99% have the Shimano style, but also because a > lot of the other styles are much easier to strip, e.g. the two-knotch > Suntour. > > Y'all know the trick about keeping the freewheel tool engaged with a nut > right? > > Jean-François > > On Dec 13, 2017, at 13:59 , Gabriel Trainer <getrainer(a)bikefarm.org> > wrote: > > At Bike Farm we have all of the freewheel and cassette tools laid out on a > magnetic strip so you can see the different shapes easily. Still a guess > and check method, but better than a bin of tools thrown together. > Gabriel > > On Dec 13, 2017 7:41 AM, "Ainsley Naylor" <needleandthread(a)gmail.com> > wrote: > >> Because these are the type of tools which are SMALL, important, easy to >> break/strip, and not always cheap (hello, did you order a Maillard french >> freewheel tool off of the internet because they are super hard to find???) >> we DO keep ours in a closed bin on the table with our vices. >> Bottom bracket tools are actually kept in our special tool area at the >> front of the shop because if people can grab stuff they are more likely to >> break it :( Hell even volunteer who do know how to use these tools properly >> still abuse and break them. >> >> I guess generally we expect that volunteer will determine what tool is >> required for a repair and retrieve and explain it, rather than people >> figuring it out/finding it for themselves.... >> >> NOT THE ANSWER YOU WANTED SORRY JOSH!!!! >> >> Ainsley. >> >> On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: >> >>> Heyyo! I've been in co-ops where they have neat ways of displaying the >>> various freewheel and cassette tools, like on a board next to the hub types >>> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >>> unhelpfully all together in a bin like we do?) Send a pic of what you got! >>> >>> tldr: show us your rad way of housing freewheel/cassette tools that >>> makes it easy for folks to find the right one. >>> >>> EXTRA CREDIT: same question re *bottom bracket tools!* >>> >>> xoxo >>> >>> Josh >>> >>> >>> Josh Bisker >>> 914-500-9890 <(914)%20500-9890> >>> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >>> 596 Acres <http://596acres.org/> >>> Bindlestiff Family Cirkus <http://bindlestiff.org/> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > >

1 0

An Easy One! Displaying Freewheel & Cassette Tools
by Josh Bisker 13 Dec '17

13 Dec '17

Heyyo! I've been in co-ops where they have neat ways of displaying the various freewheel and cassette tools, like on a board next to the hub types they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled unhelpfully all together in a bin like we do?) Send a pic of what you got! tldr: show us your rad way of housing freewheel/cassette tools that makes it easy for folks to find the right one. EXTRA CREDIT: same question re *bottom bracket tools!* xoxo Josh Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

6 5

Re: [TheThinkTank] Thethinktank Digest, Vol 135, Issue 6
by Tegan Moss [B!KE] 13 Dec '17

13 Dec '17

On Dec 13, 2017 4:08 PM, <thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. An Easy One! Displaying Freewheel & Cassette Tools (Josh Bisker) > 2. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Ainsley Naylor) > 3. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Gabriel Trainer) > 4. Re: An Easy One! Displaying Freewheel & Cassette Tools > (Jean-Fran?ois Caron) > > > ---------- Forwarded message ---------- > From: Josh Bisker <jbisker(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 01:31:25 -0500 > Subject: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette Tools > Heyyo! I've been in co-ops where they have neat ways of displaying the > various freewheel and cassette tools, like on a board next to the hub types > they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled > unhelpfully all together in a bin like we do?) Send a pic of what you got! > > tldr: show us your rad way of housing freewheel/cassette tools that makes > it easy for folks to find the right one. > > EXTRA CREDIT: same question re *bottom bracket tools!* > > xoxo > > Josh > > > Josh Bisker > 914-500-9890 <(914)%20500-9890> > New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> > 596 Acres <http://596acres.org/> > Bindlestiff Family Cirkus <http://bindlestiff.org/> > > > ---------- Forwarded message ---------- > From: Ainsley Naylor <needleandthread(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 10:41:47 -0500 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > Because these are the type of tools which are SMALL, important, easy to > break/strip, and not always cheap (hello, did you order a Maillard french > freewheel tool off of the internet because they are super hard to find???) > we DO keep ours in a closed bin on the table with our vices. > Bottom bracket tools are actually kept in our special tool area at the > front of the shop because if people can grab stuff they are more likely to > break it :( Hell even volunteer who do know how to use these tools properly > still abuse and break them. > > I guess generally we expect that volunteer will determine what tool is > required for a repair and retrieve and explain it, rather than people > figuring it out/finding it for themselves.... > > NOT THE ANSWER YOU WANTED SORRY JOSH!!!! > > Ainsley. > > On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: > >> Heyyo! I've been in co-ops where they have neat ways of displaying the >> various freewheel and cassette tools, like on a board next to the hub types >> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >> unhelpfully all together in a bin like we do?) Send a pic of what you got! >> >> tldr: show us your rad way of housing freewheel/cassette tools that makes >> it easy for folks to find the right one. >> >> EXTRA CREDIT: same question re *bottom bracket tools!* >> >> xoxo >> >> Josh >> >> >> Josh Bisker >> 914-500-9890 <(914)%20500-9890> >> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >> 596 Acres <http://596acres.org/> >> Bindlestiff Family Cirkus <http://bindlestiff.org/> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > ---------- Forwarded message ---------- > From: Gabriel Trainer <getrainer(a)bikefarm.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 11:59:24 -0800 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > At Bike Farm we have all of the freewheel and cassette tools laid out on a > magnetic strip so you can see the different shapes easily. Still a guess > and check method, but better than a bin of tools thrown together. > Gabriel > > On Dec 13, 2017 7:41 AM, "Ainsley Naylor" <needleandthread(a)gmail.com> > wrote: > >> Because these are the type of tools which are SMALL, important, easy to >> break/strip, and not always cheap (hello, did you order a Maillard french >> freewheel tool off of the internet because they are super hard to find???) >> we DO keep ours in a closed bin on the table with our vices. >> Bottom bracket tools are actually kept in our special tool area at the >> front of the shop because if people can grab stuff they are more likely to >> break it :( Hell even volunteer who do know how to use these tools properly >> still abuse and break them. >> >> I guess generally we expect that volunteer will determine what tool is >> required for a repair and retrieve and explain it, rather than people >> figuring it out/finding it for themselves.... >> >> NOT THE ANSWER YOU WANTED SORRY JOSH!!!! >> >> Ainsley. >> >> On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: >> >>> Heyyo! I've been in co-ops where they have neat ways of displaying the >>> various freewheel and cassette tools, like on a board next to the hub types >>> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >>> unhelpfully all together in a bin like we do?) Send a pic of what you got! >>> >>> tldr: show us your rad way of housing freewheel/cassette tools that >>> makes it easy for folks to find the right one. >>> >>> EXTRA CREDIT: same question re *bottom bracket tools!* >>> >>> xoxo >>> >>> Josh >>> >>> >>> Josh Bisker >>> 914-500-9890 <(914)%20500-9890> >>> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >>> 596 Acres <http://596acres.org/> >>> Bindlestiff Family Cirkus <http://bindlestiff.org/> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > ---------- Forwarded message ---------- > From: "Jean-François Caron" <jfcaron3(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 13 Dec 2017 14:54:38 -0600 > Subject: Re: [TheThinkTank] An Easy One! Displaying Freewheel & Cassette > Tools > At the Bike Kitchen in Vancouver (from what I recall, having left over a > year ago), we only had the common Shimano-style freewheel and cassette > tools. The freewheel tool has a hole in it, so we just put it on a nail in > the wall, the cassette tool has a steel rod, so we stuck it in a hole in > the wall next to the aforementioned nail. > > Anything other than the standard Shimano-style tools, you had to ask a > mechanic to get it behind the counter. This is both because it's less > confusing for newbies who 99% have the Shimano style, but also because a > lot of the other styles are much easier to strip, e.g. the two-knotch > Suntour. > > Y'all know the trick about keeping the freewheel tool engaged with a nut > right? > > Jean-François > > On Dec 13, 2017, at 13:59 , Gabriel Trainer <getrainer(a)bikefarm.org> > wrote: > > At Bike Farm we have all of the freewheel and cassette tools laid out on a > magnetic strip so you can see the different shapes easily. Still a guess > and check method, but better than a bin of tools thrown together. > Gabriel > > On Dec 13, 2017 7:41 AM, "Ainsley Naylor" <needleandthread(a)gmail.com> > wrote: > >> Because these are the type of tools which are SMALL, important, easy to >> break/strip, and not always cheap (hello, did you order a Maillard french >> freewheel tool off of the internet because they are super hard to find???) >> we DO keep ours in a closed bin on the table with our vices. >> Bottom bracket tools are actually kept in our special tool area at the >> front of the shop because if people can grab stuff they are more likely to >> break it :( Hell even volunteer who do know how to use these tools properly >> still abuse and break them. >> >> I guess generally we expect that volunteer will determine what tool is >> required for a repair and retrieve and explain it, rather than people >> figuring it out/finding it for themselves.... >> >> NOT THE ANSWER YOU WANTED SORRY JOSH!!!! >> >> Ainsley. >> >> On Wed, Dec 13, 2017 at 1:31 AM, Josh Bisker <jbisker(a)gmail.com> wrote: >> >>> Heyyo! I've been in co-ops where they have neat ways of displaying the >>> various freewheel and cassette tools, like on a board next to the hub types >>> they fit. Is YOUR shop one of these? (Or do you just have 'em jumbled >>> unhelpfully all together in a bin like we do?) Send a pic of what you got! >>> >>> tldr: show us your rad way of housing freewheel/cassette tools that >>> makes it easy for folks to find the right one. >>> >>> EXTRA CREDIT: same question re *bottom bracket tools!* >>> >>> xoxo >>> >>> Josh >>> >>> >>> Josh Bisker >>> 914-500-9890 <(914)%20500-9890> >>> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >>> 596 Acres <http://596acres.org/> >>> Bindlestiff Family Cirkus <http://bindlestiff.org/> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > >

1 0

Looking for HR and Compensation policies
by CZ Mike 12 Dec '17

12 Dec '17

Urban Bike Project of Wilmington, DE is growing and we need to get better policies in place for addressing HR and Compensation issues. As a member of the Board of Directors and an active volunteer I'm charged with developing some policies, procedures and guidelines for managing employees, including roles and responsibilities of Board members and the Executive Director. If anyone has documentation that you are willing to share to give me a leg-up, that would be great, TIA, Mike

1 0

Re: [TheThinkTank] Visual of What An Exchange Program Could look Like
by rob＠robertgrossmandesign.com 05 Dec '17

05 Dec '17

3 2

Re: [TheThinkTank] Thethinktank Digest, Vol 135, Issue 3
by Shawn Höffarth 05 Dec '17

05 Dec '17

please take me off this list. thanks Shawn Hoffarth TheCrew - Skateboarding Advocate On Tue, Dec 5, 2017 at 1:06 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. Re: Visual of What An Exchange Program Could look Like > (francisco diamond) > 2. Re: Visual of What An Exchange Program Could look Like > (rob(a)robertgrossmandesign.com) > 3. Re: Visual of What An Exchange Program Could look Like > (francisco diamond) > > > ---------- Forwarded message ---------- > From: francisco diamond <frdiamond(a)msn.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Mon, 4 Dec 2017 21:31:07 +0000 > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could look > Like > Hi, Robert > I am on the planning committee for bike! bike! Can you repost your > blueprint maybe I can use portions of it when we set up. > > Get Outlook for iOS <https://aka.ms/o0ukef> > ------------------------------ > *From:* Thethinktank <thethinktank-bounces(a)lists.bikecollectives.org> on > behalf of rob(a)robertgrossmandesign.com <rob(a)robertgrossmandesign.com> > *Sent:* Wednesday, November 29, 2017 9:21:27 PM > *To:* The Think Tank > *Subject:* Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > > Hi Lauren and TT, > > Great thoughts and questions! I added them to the Master Blueprint, which > can be viewed here... > https://realtimeboard.com/app/board/o9J_k0OiQZc=/ > > If Ainsley would like to send her notes as bullet points, they can be > added to the Blueprint as well. > > As for intake procedures, that's a great idea. It would be awesome if > someone would act out how that would go down and record it so it can > added into this to be referenced later. > > There are already sample application forms for both shops and > exchangees put together. I'll get them posted soon for everyone to comment > on. > > Lauren, what sort of troubleshooting of international exchange issues are > you referring to? > > > > > -------- Original Message -------- > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > From: Lauren Warbeck <lauren.warbeck(a)gmail.com> > Date: Mon, November 20, 2017 1:50 pm > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > > Hey buds! > > As often, this is a project that we started exploring a few years ago that > fell to the wayside, and that folks before us started working on too. I'm > so excited to see it revived! Ainsley, I think you recently unearthed our > notes? > > I think this is a great overall framework. I'm sure you've thought about > these things, but just to put them out there on the TT... > > In my experience, each shop will have their own culture and procedures > around taking on volunteers, and resources to do so will be highly > variable. For that reason, I think this general rubric is great. Once you > really get into the details, could part of the application require each > shop to outline what their intake procedure is? Could an overall framework > be developed that shops can draw on for their interviews/questions to > consider...like suggested application details. Are there thoughts yet on > what a suggested application could look like in terms of content? > > For international exchanges, the most significant roadblock, I think, is > coordinating visas, permits, and taxation for those shops that operate more > formally in the registered non-profit paradigm. Most shops, I suspect, > can't afford the risk inherent to having noncitizen workers or afford the > potential heat from the law on having noncitizens working in their shops. > Could a guideline to the opportunities and risks inherent to volunteering > or working in another country be provided to the person seeking exchange? > And for those orgs that aren't incorporated in the formal nonprofit > paradigm, could there be a way to ensure discretion while trying to > organize an international exchange online? Or a list of guidelines about > how to stay off the radar so that no one gets deported? Or is this being > conceived of us as an exchange that takes place within the borders of a > given country? > > One thing I've thought about was that if the exchange was considered > training or professional development, home shops could pay their OWN > employees to go on an exchange. As in, pay them for the hours they work at > another shop. The receiving shop, if they have the funds, could even give > a grant or donation or funding to the other shop to fund the > exchange...like a grant for professional development. The legal terrain > here will be highly contextual, though. > > It would also be good to detail some expectations of the receiving shop in > terms of what support/welcome/orientation to the shop and community can and > would be offered, and to have a point person or two in the shop who will be > the sort of ambassador of the org/community/town/city. Again, general > guidelines specific shops could draw on in developing their support offer > would be helpful. > > In general, in my experience, exchanges and volunteers from other shops > have worked out well, and part of that is because there is often a > preexisting relationship between the incoming person and someone at the > recieving shop. The great thing about an exchange is that it could not > require that preexisting relationship...but it also means there is a risk > of taking on people who aren't a good fit for a shop, or the exchange > finding out the shop isn't right for them once they arrive. Will there be > a suggested procedure in place for vetting folks and for ending an exchange > preemptively? Like a suggested procedure for dealing with conflict, or a > budget for escape haha. A simple way might be to have a question on the > application that asks for references (preferably at other shops), and a > question around whether they've been on exchange and where, with a point > person potential exchange recipients can contact at that shop as a > reference. Is that too policey? Or is it just due diligence? > > Hmmmm I love this project. I'm personally really interested in > troubleshooting the international exchange issues. > > > > On Sat, Nov 18, 2017 at 5:08 PM, <rob(a)robertgrossmandesign.com> wrote: > >> Dear Thinktank, >> >> Here is a visual idea of how we can develop a (mostly) self-sustaining >> exchange program between Community Bicycle Workshops. >> >> http://atmoslabs.com/community-bicycle-workshop-exchange-storyboard/ >> >> Please tear into it. >> >> Cheers >> >> Rob >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > ------------------------------ > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > > ---------- Forwarded message ---------- > From: <rob(a)robertgrossmandesign.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 05 Dec 2017 10:09:52 -0700 > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could look > Like > Francisco, > > Try this link. It's for the Exchange's workspace. Let me know if there > is a problem. > https://realtimeboard.com/app/board/o9J_k0OiQZc=/ > > You may want to consider using the blueprint's structure on a spreadsheet > in Excel or Google Sheets. If you have any questions shoot me an email and > I'll do my best to help. > > All the best, > > Rob > > > > -------- Original Message -------- > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > From: francisco diamond <frdiamond(a)msn.com> > Date: Mon, December 04, 2017 2:31 pm > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > > Hi, Robert > I am on the planning committee for bike! bike! Can you repost your > blueprint maybe I can use portions of it when we set up. > > Get Outlook for iOS <https://aka.ms/o0ukef> > ------------------------------ > *From:* Thethinktank <thethinktank-bounces(a)lists.bikecollectives.org> on > behalf of rob(a)robertgrossmandesign.com <rob(a)robertgrossmandesign.com> > *Sent:* Wednesday, November 29, 2017 9:21:27 PM > *To:* The Think Tank > *Subject:* Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > > Hi Lauren and TT, > > Great thoughts and questions! I added them to the Master Blueprint, which > can be viewed here... > https://realtimeboard.com/app/board/o9J_k0OiQZc=/ > > If Ainsley would like to send her notes as bullet points, they can be > added to the Blueprint as well. > > As for intake procedures, that's a great idea. It would be awesome if > someone would act out how that would go down and record it so it can > added into this to be referenced later. > > There are already sample application forms for both shops and > exchangees put together. I'll get them posted soon for everyone to comment > on. > > Lauren, what sort of troubleshooting of international exchange issues are > you referring to? > > > > > -------- Original Message -------- > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > From: Lauren Warbeck <lauren.warbeck(a)gmail.com> > Date: Mon, November 20, 2017 1:50 pm > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > > Hey buds! > > As often, this is a project that we started exploring a few years ago that > fell to the wayside, and that folks before us started working on too. I'm > so excited to see it revived! Ainsley, I think you recently unearthed our > notes? > > I think this is a great overall framework. I'm sure you've thought about > these things, but just to put them out there on the TT... > > In my experience, each shop will have their own culture and procedures > around taking on volunteers, and resources to do so will be highly > variable. For that reason, I think this general rubric is great. Once you > really get into the details, could part of the application require each > shop to outline what their intake procedure is? Could an overall framework > be developed that shops can draw on for their interviews/questions to > consider...like suggested application details. Are there thoughts yet on > what a suggested application could look like in terms of content? > > For international exchanges, the most significant roadblock, I think, is > coordinating visas, permits, and taxation for those shops that operate more > formally in the registered non-profit paradigm. Most shops, I suspect, > can't afford the risk inherent to having noncitizen workers or afford the > potential heat from the law on having noncitizens working in their shops. > Could a guideline to the opportunities and risks inherent to volunteering > or working in another country be provided to the person seeking exchange? > And for those orgs that aren't incorporated in the formal nonprofit > paradigm, could there be a way to ensure discretion while trying to > organize an international exchange online? Or a list of guidelines about > how to stay off the radar so that no one gets deported? Or is this being > conceived of us as an exchange that takes place within the borders of a > given country? > > One thing I've thought about was that if the exchange was considered > training or professional development, home shops could pay their OWN > employees to go on an exchange. As in, pay them for the hours they work at > another shop. The receiving shop, if they have the funds, could even give > a grant or donation or funding to the other shop to fund the > exchange...like a grant for professional development. The legal terrain > here will be highly contextual, though. > > It would also be good to detail some expectations of the receiving shop in > terms of what support/welcome/orientation to the shop and community can and > would be offered, and to have a point person or two in the shop who will be > the sort of ambassador of the org/community/town/city. Again, general > guidelines specific shops could draw on in developing their support offer > would be helpful. > > In general, in my experience, exchanges and volunteers from other shops > have worked out well, and part of that is because there is often a > preexisting relationship between the incoming person and someone at the > recieving shop. The great thing about an exchange is that it could not > require that preexisting relationship...but it also means there is a risk > of taking on people who aren't a good fit for a shop, or the exchange > finding out the shop isn't right for them once they arrive. Will there be > a suggested procedure in place for vetting folks and for ending an exchange > preemptively? Like a suggested procedure for dealing with conflict, or a > budget for escape haha. A simple way might be to have a question on the > application that asks for references (preferably at other shops), and a > question around whether they've been on exchange and where, with a point > person potential exchange recipients can contact at that shop as a > reference. Is that too policey? Or is it just due diligence? > > Hmmmm I love this project. I'm personally really interested in > troubleshooting the international exchange issues. > > > > On Sat, Nov 18, 2017 at 5:08 PM, <rob(a)robertgrossmandesign.com> wrote: > >> Dear Thinktank, >> >> Here is a visual idea of how we can develop a (mostly) self-sustaining >> exchange program between Community Bicycle Workshops. >> >> http://atmoslabs.com/community-bicycle-workshop-exchange-storyboard/ >> >> Please tear into it. >> >> Cheers >> >> Rob >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > ------------------------------ > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > ------------------------------ > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > > ---------- Forwarded message ---------- > From: francisco diamond <frdiamond(a)msn.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 5 Dec 2017 19:37:36 +0000 > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could look > Like > Ok lol, I ITed my way in the last part of url wasn’t there. What is a > corner marshal? > > Get Outlook for iOS <https://aka.ms/o0ukef> > ------------------------------ > *From:* Thethinktank <thethinktank-bounces(a)lists.bikecollectives.org> on > behalf of rob(a)robertgrossmandesign.com <rob(a)robertgrossmandesign.com> > *Sent:* Tuesday, December 5, 2017 9:09:52 AM > *To:* The Think Tank > *Subject:* Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > > Francisco, > > Try this link. It's for the Exchange's workspace. Let me know if there > is a problem. > https://realtimeboard.com/app/board/o9J_k0OiQZc=/ > > You may want to consider using the blueprint's structure on a spreadsheet > in Excel or Google Sheets. If you have any questions shoot me an email and > I'll do my best to help. > > All the best, > > Rob > > > > -------- Original Message -------- > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > From: francisco diamond <frdiamond(a)msn.com> > Date: Mon, December 04, 2017 2:31 pm > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > > Hi, Robert > I am on the planning committee for bike! bike! Can you repost your > blueprint maybe I can use portions of it when we set up. > > Get Outlook for iOS <https://aka.ms/o0ukef> > ------------------------------ > *From:* Thethinktank <thethinktank-bounces(a)lists.bikecollectives.org> on > behalf of rob(a)robertgrossmandesign.com <rob(a)robertgrossmandesign.com> > *Sent:* Wednesday, November 29, 2017 9:21:27 PM > *To:* The Think Tank > *Subject:* Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > > Hi Lauren and TT, > > Great thoughts and questions! I added them to the Master Blueprint, which > can be viewed here... > https://realtimeboard.com/app/board/o9J_k0OiQZc=/ > > If Ainsley would like to send her notes as bullet points, they can be > added to the Blueprint as well. > > As for intake procedures, that's a great idea. It would be awesome if > someone would act out how that would go down and record it so it can > added into this to be referenced later. > > There are already sample application forms for both shops and > exchangees put together. I'll get them posted soon for everyone to comment > on. > > Lauren, what sort of troubleshooting of international exchange issues are > you referring to? > > > > > -------- Original Message -------- > Subject: Re: [TheThinkTank] Visual of What An Exchange Program Could > look Like > From: Lauren Warbeck <lauren.warbeck(a)gmail.com> > Date: Mon, November 20, 2017 1:50 pm > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > > Hey buds! > > As often, this is a project that we started exploring a few years ago that > fell to the wayside, and that folks before us started working on too. I'm > so excited to see it revived! Ainsley, I think you recently unearthed our > notes? > > I think this is a great overall framework. I'm sure you've thought about > these things, but just to put them out there on the TT... > > In my experience, each shop will have their own culture and procedures > around taking on volunteers, and resources to do so will be highly > variable. For that reason, I think this general rubric is great. Once you > really get into the details, could part of the application require each > shop to outline what their intake procedure is? Could an overall framework > be developed that shops can draw on for their interviews/questions to > consider...like suggested application details. Are there thoughts yet on > what a suggested application could look like in terms of content? > > For international exchanges, the most significant roadblock, I think, is > coordinating visas, permits, and taxation for those shops that operate more > formally in the registered non-profit paradigm. Most shops, I suspect, > can't afford the risk inherent to having noncitizen workers or afford the > potential heat from the law on having noncitizens working in their shops. > Could a guideline to the opportunities and risks inherent to volunteering > or working in another country be provided to the person seeking exchange? > And for those orgs that aren't incorporated in the formal nonprofit > paradigm, could there be a way to ensure discretion while trying to > organize an international exchange online? Or a list of guidelines about > how to stay off the radar so that no one gets deported? Or is this being > conceived of us as an exchange that takes place within the borders of a > given country? > > One thing I've thought about was that if the exchange was considered > training or professional development, home shops could pay their OWN > employees to go on an exchange. As in, pay them for the hours they work at > another shop. The receiving shop, if they have the funds, could even give > a grant or donation or funding to the other shop to fund the > exchange...like a grant for professional development. The legal terrain > here will be highly contextual, though. > > It would also be good to detail some expectations of the receiving shop in > terms of what support/welcome/orientation to the shop and community can and > would be offered, and to have a point person or two in the shop who will be > the sort of ambassador of the org/community/town/city. Again, general > guidelines specific shops could draw on in developing their support offer > would be helpful. > > In general, in my experience, exchanges and volunteers from other shops > have worked out well, and part of that is because there is often a > preexisting relationship between the incoming person and someone at the > recieving shop. The great thing about an exchange is that it could not > require that preexisting relationship...but it also means there is a risk > of taking on people who aren't a good fit for a shop, or the exchange > finding out the shop isn't right for them once they arrive. Will there be > a suggested procedure in place for vetting folks and for ending an exchange > preemptively? Like a suggested procedure for dealing with conflict, or a > budget for escape haha. A simple way might be to have a question on the > application that asks for references (preferably at other shops), and a > question around whether they've been on exchange and where, with a point > person potential exchange recipients can contact at that shop as a > reference. Is that too policey? Or is it just due diligence? > > Hmmmm I love this project. I'm personally really interested in > troubleshooting the international exchange issues. > > > > On Sat, Nov 18, 2017 at 5:08 PM, <rob(a)robertgrossmandesign.com> wrote: > >> Dear Thinktank, >> >> Here is a visual idea of how we can develop a (mostly) self-sustaining >> exchange program between Community Bicycle Workshops. >> >> http://atmoslabs.com/community-bicycle-workshop-exchange-storyboard/ >> >> Please tear into it. >> >> Cheers >> >> Rob >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > ------------------------------ > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > ------------------------------ > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > >

1 0

Re: [TheThinkTank] Visual of What An Exchange Program Could look Like
by rob＠robertgrossmandesign.com 04 Dec '17

04 Dec '17

2 1

Health Hazard from Drum Brakes
by Jean-François Caron 01 Dec '17

01 Dec '17

Hi everyone, I recently came across a vendor selling a drum brake[1] where they claimed it had "No asbes" i.e. no asbestos. This led me to search about asbestos in bicycle brakes, and indeed it's a thing: http://santanatandem.com/Library/AraiDBrakeIns.pdf <http://santanatandem.com/Library/AraiDBrakeIns.pdf> (go to page 2, paragraph 4 in "Service") The quantity is small and it's not friable, it's solid chunks (like old chemistry lab benches) which pose no actual hazard. Unless you are frequently overhauling these drum brakes with abrasives & sucking in the dust, the risk should be negligible, but it's good to know about. If any shops out there have a bin for drum brakes, I'd suggest putting a warning label on it, or attaching a tag to the individual brakes if they are in a mixed bin. Jean-François [1] http://www.diacompe.com.tw/product/mlb-50/

2 1

bikes on display
by Edward Stewart 28 Nov '17

28 Nov '17

We at the Elyria (Ohio) Bicycle Education Center are pretty new to much of how to run a coop and shop. We appreciate the collective intelligence being shared here. We are looking for a good and inexpensive way to display bikes in our front 'sales room' without relying on kickstands to hold up the bikes (some have'em, some don't). Willing to build wood racks or whatever but have not seen anything reasonable yet. Any suggestions? -- Ed Stewart emsco514(a)gmail.com 440-365-6784 *I have an escape mechanism for stress: my bike.* <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

9 9

Re: [TheThinkTank] Ideas for places to Stay During an Exchange
by rob＠robertgrossmandesign.com 28 Nov '17

28 Nov '17

1 0

Sorting parts/bike storage/safer spaces
by Anna Weier 28 Nov '17

28 Nov '17

Hey folks, I have three questions that I’m hoping to get input on: 1. Do any of you have good resources with pictures and text about what to look for when you are sorting through old parts and trying to determine what to keep and what to scrap? I am looking for something that I can use to help train volunteers as a guide for them to follow when they are going through old parts bins. 2. I am looking to build the cheapest possible medium-term bike storage that allows me to use some vertical space. I was thinking essentially just a platform that would go against a wall and bikes would be stored underneath and on top. This is for bikes we are building up now to sell in the spring so we want to pack them in and likely will take off pedals and re-orient handlebars. If anyone had a simple plan to follow it would make my life easier. 3. I’m wondering if any folks have good policies, processes or training for ensuring that your spaces are safer spaces for women, people of colour, LGBT2Q*, people with disabilities, newcomers, refugees etc. I am especially wondering how to make sure that it is easy to bring volunteers on while ensuring there is some sort of training or code of conduct to ensure that they know how to help create a safer space. Thanks folks! Anna Anna Weier UMCycle Manager University of Manitoba Students' Union Winter Kiosk Hours: Monday and Thursday, 11am – 12:30pm Volunteer and Community Stand Hours in the Warehouse: Monday 2pm – 4pm (volunteers), Thursday 1:30pm – 4pm (Supported Community Stand – everyone welcome) Please feel free to make an appointment if those times don’t work for you. tel: 204.474.8484 @MyUMSU<https://www.instagram.com/myumsu/>

3 3

Visual of What An Exchange Program Could look Like
by rob＠robertgrossmandesign.com 20 Nov '17

20 Nov '17

2 1

Re: [TheThinkTank] Ideas for places to Stay During an Exchange
by rob＠robertgrossmandesign.com 19 Nov '17

19 Nov '17

2 1

Phoenix Bikes (Arlington, VA) Hiring Education Program Manager
by Phoenix Bikes 19 Nov '17

19 Nov '17

Hi Everyone, Phoenix Bikes <http://www.phoenixbikes.org/>, located in Arlington, VA, is hiring for our Education Program Manager <https://www.idealist.org/en/nonprofit-job/7f78f0ede83145cd9d740614cd2078a1-…> position. Deadline to apply is Dec. 8th and the start date is February 1st. Thanks in advance for helping spread the word! Take care and Happy Thanksgiving, Meg *Meg Rapelye, MSW* Executive Director, Phoenix Bikes 4200 S. Four Mile Run Drive <https://maps.google.com/?q=4200+S.+Four+Mile+Run+DriveArlington,+VA+22206&e…> Arlington, VA 22206 <https://maps.google.com/?q=4200+S.+Four+Mile+Run+DriveArlington,+VA+22206&e…> Bike Shop: 703-575-7762 <(703)%20575-7762> Cell: 703-350-3843 <(703)%20350-3843> Web: www.phoenixbikes.org Facebook: https://www.facebook.com/phoenixbikesVA/ Twitter: https://twitter.com/PhoenixBikes Instagram: phoenix_bikes <https://www.instagram.com/phoenix_bikes/>

1 0

Input on Tasks for Drop-In Volunteers
by Josh Bisker 18 Nov '17

18 Nov '17

Hello Pals!!!!!!!! Systems are shaping up at the Mechanical Gardens in NYC, and we're looking to develop more structure for drop-in volunteers. This includes irregular volunteers and regulars too. *What are some of the ways **you'd recommend **to do this well?* And what resources can you share? - PDFs of handouts from your shops or snapshots of things like task boards would be super helpful, as would other advice! - We want a balance of "low barrier for entry" tasks and "guidance or skill required" tasks. - We would love to hear your insights on how to frame these things to be learning and empowerment experiences instead of just "hey do this thing bye" or "hey do this thing while I hover over you." ALSO ALSO PLEASE LOOKIE: We're posing this as a question to everyone, *but* would primarily love to hear from some women/trans/femme/gender non-conforming organizers, if anyone who identifies that way is inclined to jump into the thread. Partly this is because the ThinkTank is often very male-dominated, and partly it's because in our shop, at least, cismen are way more likely to jump into / blunder through participating without structures to invite them in or help them contribute in the best way possible. For this reason, insights from non-cismen organizers would be great here. xox to all of course though :) Josh Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

4 3

Re: [TheThinkTank] Ideas for places to Stay During an Exchange
by rob＠robertgrossmandesign.com 17 Nov '17

17 Nov '17

1 0

Re: [TheThinkTank] Ideas for places to Stay During an Exchange
by Robert Grossman 16 Nov '17

16 Nov '17

Noah, what do you mean by mailbox? Cyclists, all great input! - community organizations - campus housing - airbnb special deal Just getting together some ideas of placesd for shops to consider approaching to arrange a place to stay for a visiting exchange. This won't go on bikecollectives.org anytime soon. Godwin has his hands full. Keep the ideas coming! How about: -YMCAS -retired community member's homes On Nov 14, 2017 6:25 PM, "Noah Chubb-Silverman" <noah(a)renobikeproject.org> wrote: > Is mailbox a correct answer? > > On Tue, Nov 14, 2017 at 4:24 PM, <cyclista(a)inventati.org> wrote: > >> I mean I guess why not use bikecollectives.org as the channel? Like a >> space/checkbox/description field/whatever set aside on every org's page? >> >> -Cyclista >> >> >> >> On 2017-11-15 00:22, cyclista(a)inventati.org wrote: >> >>> So I guess the main step here would be a channel, hopefully a >>> consistent and sustainable one, where regional CBS's could signify >>> they have ready and arranged accommodations. The second thing would be >>> a way to use that or a similar channel to announce when they are >>> soliciting an exchange. In reverse that channel could be used by >>> Directors or mechs or specialists of whatever type to announce they >>> had availability in their schedule to travel, or even advertise types >>> of info they had prepared for exchange. >>> >>> Even then we still get stuck at travel expenses. But we can tackle >>> that separately. >>> >>> -Cyclista >>> >>> >>> On 2017-11-15 00:14, cyclista(a)inventati.org wrote: >>> >>>> Speaking for myself, if I was being hosted I'd like choices. Camping >>>> in someone's backyard might be an excellent and preferable option some >>>> times of the year, while being hosted in someone's actual house might >>>> be nicer at other times or in other circumstances. >>>> >>>> I remember at the regional BikeBike! in Troy they had a huge >>>> repurposed church (which I believe was The Center For Independent >>>> media?) and they had a huge sleepover for at least fifty of us in the >>>> huge congregation chamber (it was a lot of fun). They had a huge >>>> kitchen and everything. Places like that exist in a lot of towns and >>>> are often ready to step up as hosts as well. >>>> >>>> I know Cornell here in Ithaca has small apartments withing the campus >>>> often not attached to any dormitory explicitly set aside for visiting >>>> professors and speakers. Accommodations like that are probably a good >>>> thing for all of us to start setting up ot just for this project, but >>>> for all kinds of other exchanges as well. >>>> >>>> Even a place that usually does AirBNB but which had an standing >>>> agreement with organizations to reserve the space for visiting >>>> exchangers would be effective. I think the options are fairly diverse >>>> here. >>>> >>>> -Cyclista >>>> >>>> >>>> On 2017-11-14 23:05, Robert Grossman wrote: >>>> >>>>> Hi Think Tank >>>>> >>>>> How might we house visiting our shops to help for extended periods? >>>>> >>>>> Please reply to the thread with ideas. >>>>> >>>>> Here is a start : >>>>> - volunteers with spare room >>>>> -hostels >>>>> -Catholic Ministries >>>>> -CAIN in Cincinnati >>>>> -airbnb >>>>> -camp in a backyard >>>>> >>>>> What else could go on this list? >>>>> >>>>> ____________________________________ >>>>> >>>>> The ThinkTank mailing List >>>>> >>>>> Unsubscribe from this list here: >>>>> http://lists.bikecollectives.org/options.cgi/thethinktank-bi >>>>> kecollectives.org >>>>> >>>> ____________________________________ >>>> >>>> The ThinkTank mailing List >>>> >>>> Unsubscribe from this list here: >>>> http://lists.bikecollectives.org/options.cgi/thethinktank-bi >>>> kecollectives.org >>>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: >>> http://lists.bikecollectives.org/options.cgi/thethinktank-bi >>> kecollectives.org >>> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >

4 3

Neighborhood Bike Works is Hiring a Mechanic Programs Coordinator
by Shivon Love 16 Nov '17

16 Nov '17

Hi folks, Please spread the word that we're hiring for a Mechanic Programs Coordinator. This is a community-oriented youth work position. Start date is January 3,2018. Full job description is attached. Deadline to apply is December 8, 2017 -- -- Shivon Love Director of Youth Programs Neighborhood Bike Works <http://www.neighborhoodbikeworks.org/> (215) 386-0316 x117 *My pronouns <https://uwm.edu/lgbtrc/support/gender-pronouns/> are she/her*

1 0

Ideas for places to Stay During an Exchange
by Robert Grossman 14 Nov '17

14 Nov '17

Hi Think Tank How might we house visiting our shops to help for extended periods? Please reply to the thread with ideas. Here is a start : - volunteers with spare room -hostels -Catholic Ministries -CAIN in Cincinnati -airbnb -camp in a backyard What else could go on this list?

2 3

Pedagogic tools on bike mechanics
by Katy Collet 07 Nov '17

07 Nov '17

Hi everyone, Cyclo North-South is a community organization in Montréal, Quebec (Canada) that collects used bicycles in order to give access to a way of transportation for people with low income and/or marginalized, through local and international projects. In each projects, we try to reinforce bike mechanics skills of our partners and people receiving bicycles to make them more autonomous since the ressources (bike mechanics, incomes) are very limited especially in rural area. One of the issue of our partners in Africa and Latin America is that they don¹t have easily access to pedagogic tools on bike mechanics. We are currently working on gathering what already exists (local and international) regarding pedagogic tools on bike mechanics (printed or other types) in order to either share those tools to our partners either adapt them so they can be used by youths and general public that is in Togo, Ghana, Haiti, Ecuador, etc. The objective is to provide a teaching tool that includes a guide on tools, tune-ups and repairs. If you know or have access to any kind of learning tools and feel comfortable to share, please write to me at : katy(a)cyclonordsud.org Thanks, Katy Collet Coordonnatrice projets internationaux 514 843-0077 ext. 1006 1 888 843-0077 8717, 8e Avenue, Montréal, QC H1Z 2X4 cyclonordsud.org <http://www.cyclonordsud.org/> facebook.com/cyclonordsud <http://www.facebook.com/cyclonordsud>

3 4

Shop Starter Kit
by alexander＠whitepariah.com 07 Nov '17

07 Nov '17

2 1

ISO: Consensus Comic
by Josh Bisker 02 Nov '17

02 Nov '17

Heyyo, does anyone have a comic that about how to do consensus process? Or have a resource that you love the bestest best when it comes to explaining the How or the Why of consensus? Maybe even a document you use at your shop? I'm thinking about making a rudimentary consensus comic and could use help in the way of references to consult. Every google search result about consensus is like "here, read this long document for the next three hours," and in those documents, the "How To" steps are buried in like ten million words about guiding principles. Everyone learns differently, and that's not the best way to learn for a lot of us. A comic could help. Please send me your resources. Josh Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

2 2

Blackstone Bicycle Works is hiring a program manager!
by J Michael Eugenio 01 Nov '17

01 Nov '17

Here at Blackstone Bicycle Works we’re looking for a program manager. If you don’t already know us, Blackstone is a community bike shop and youth program on Chicago’s south side (you can also check out our instagram <https://www.instagram.com/blackstonebikes/> to get an idea of what we do). Over the years the youth program has expanded to include after school and summer programming, gardening camp, physics classes, cooking classes, art on Fridays, a cyclocross team, shop internships, externships with other shops, college advising, career field trips, and even college scholarships. Additionally, the youth are vital to the running of the shop, learning mechanic and business skills, and earning a bike after their first 25 hours in the program. We’ve been successful enough that nearly all of our paid mechanics have come up through the program! That said, there’re lots of ways to grow and improve the business and our youth programming. We're excited to bring on a program manager to work with our current staff, volunteers, and youth on this and are thankful to any of you that can help us find someone that can take on the role. Feel free to follow up with us about the role, the program, or our hiring process! For the right person, this is a really great opportunity. The bike shop is part of a larger non profit and an even larger community space full of cyclists, journalists, artists, baristas, students, organizers, designers, social workers, and community members. Most importantly, the kids and everyone in the shop are great! I’ve attached a program description that can also be found on our website at: exp.st/ESjobs In cooperation, Michael *J. Michael Eugenio* Communications Associate experimentalstation.org 773 241-6044 @expstation: facebook <https://www.facebook.com/expstation/> / twitter <http://twitter.com/expstation> / instagram <https://www.instagram.com/expstation/>

1 0

Cycles for Change (Mpls, MN) Hiring - Retail Sales and Service Manager
by Jason Partridge 31 Oct '17

31 Oct '17

Cycles for Change is a non-profit operating two community bike shops - one in St. Paul and one in Minneapolis, Minnesota. We are hiring for a Retail Sales and Service Manager for our newly expanded Minneapolis shop. The Retail Sales and Service Manager will lead a team of 3-5 bike mechanics and sales associates and will be responsible for work-flow, quality assurance, shop processes, staff training/development, and the successful repair of bicycles for customers and used bikes for the sales floor. More details at the following link: http://www.minnesotanonprofits.org/job-details?id=142406 Position is open until filled - priority to applications received by November 30. Resume and cover letter to apply. Compensation is $33,000-$40,000/year ($16-19/hr) Email me directly with any questions! Please consider applying!

1 0

Cargo Bicycle Building Apprenticeship Program
by Jan VanderTuin 30 Oct '17

30 Oct '17

Dear Community Bicycle Builders, Starting November 27th, 2017, the Center for Appropriate Transport in Eugene, OR will be hosting a 4 month long live-in apprenticeship program. Apprentices will learn the frame building skills necessary to fabricate their own Tri-Hauler, as well as the entrepreneurial skills to use their Tri-Hauler for a pedal-powered business venture of their choice. Apprentices will become competent fabricators learning to weld ( TIG and brazing), machinists, industrial sewers, gardeners, CAD users and more. We now have details regarding the course timeline, the cost, and what the apprentices can expect to receive from the program outlined on our website http://hpm.catoregon.org/apprenticeship-program/ Some examples of money-making ventures using the Tri-Hauler can be seen at our business partner's website http://pedalersexpress.com You can also read endorsements from our past apprentices at http://www.catoregon.org/ As of this date 28 folks from around the world have built their own cargo bikes and learned the skills. We will be accepting 3 applicants for our Winter 2017-'18 program. The deadline to send in an application is November 18th, 2017. Please pass along this email to anyone who might be interested in the program. Sincerely, Jan VanderTuin Center for Appropriate Transport

1 0

Strategic Planning & Program Evaluation - example questions
by Alix Aylen 30 Oct '17

30 Oct '17

Hey hey, We're working on some strategic planning at Charlie's <http://www.charliesfreewheels.ca/> in TO and I'm wondering if any folks can share examples of interview and/or survey questions that you've used for strat plan or program evaluation purposes? Any "youth" specific examples would be super awesome, but other examples would be great as well. We'll be interviewing/surveying our community partners and holding a less formal group discussion with the youths and volunteers. If anyone has an experience that they think would be helpful, lemmme know! Would love to chat by phone/skype/email, etc...Whatever works! I'll be documenting the entire process, so I'd also be more than happy to organize a workshop based on our experience if folks are interested. Thanks all! -- *Alix Aylen* Executive Director 242.5 Queen Street E. M5A 1S3 Toronto, Ontario t. 416-856-5510 www.charliesfreewheels.ca Sign up for our newsletter <http://charliesfreewheels.us3.list-manage.com/subscribe?u=796baa6919ab0f3b6…> Get more young people on bikes! Click below to donate to Charlies' FreeWheels <https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=NTHJ4G…> . [image: http://www.charliesfreewheels.ca/donate/] <http://www.charliesfreewheels.ca/donate/>

1 0

Hiring Posting from Seattle!
by Tina Bechler 23 Oct '17

23 Oct '17

*PROGRAM COORDINATOR * *Full-Time * *Organizational Overview:* Bike Works, based in Seattle, has been working since 1996 to promote the bicycle as a vehicle for change to empower youth and build resilient communities. Last year over 2,500 youth and adults participated in our programs. Our vision is: Mobilized people, thriving communities, healthy planet. *Role Overview: * The Bike Works Program Coordinator works with the Programs Team to run our youth and adult programs. This role includes teaching bike repair classes, running bike rides and safety rodeos, and maintaining outreach and redistribution of bicycles to the community. Each day will be a blend of these tasks within a team of four, requiring both collaboration and independence. This is an excellent opportunity for someone who loves to ride bikes and has youth and adult mentoring/teaching experience. *Priority will be given to candidates who currently live in Seattle.* *People of color are strongly encouraged to apply. * *Bike Works is an Equal Opportunity and queer-friendly employer.* *Essential Job Functions:* · Works independently, or with the programs team, to run programs; including bike repair classes, bike riding clubs, bike giveaways, summer camps, BikeMobile services, and all community partnerships. · Maintains outreach efforts for programs by calling, emailing and visiting contacts on a quarterly basis. · Updates registrations, database, class documents and calendars as needed. · Coordinates bike storage and bike needs for various programs. · Maintains classroom environments; cleans and restocks spaces weekly. *Compensation: * $32,500-$35,500 DOE Plus full benefits including: employer sponsored health, dental, vision, and life insurance; 12 days of vacation to start (one day each additional year of work); paid organization-wide recess from 12/25 to 1/1 every year; reimbursement for mileage when using bike for work; 10 days sick leave, short and long term disability; employer matching contributions to retirement account; all products in our bike shop and catalog at cost (including new bikes and parts); $250 towards yearly training (outside of all training necessary for the job); casual dress code for work. *Qualifications & Experience: * · Experienced bike rider; able to ride a bike long distances, bike touring experience preferred but not necessary. · Ability to teach in an engaging and yet, challenging manner; prior experience mentoring is necessary, prior experience teaching is preferred. · Basic knowledge of bike mechanics preferred; willingness to learn necessary. · Understanding of social justice and awareness of privilege is necessary. - Ability to organize and complete multiple tasks is required for this position. - Capacity to work on a computer and complete paperwork and database work is required for this position. · Driver’s license; ability to pass a driving record check & drive large vehicles (vans, trucks) is required for this position. · Ability to work evenings and weekends is required for this position (general schedule is 10am-6:30pm Tuesday through Saturday with some variation). *who we are: * · *collaborative team players* · *passionate educators * · *bike riders, bike mechanics* · *social justice activists* · *energetic and hard workers who manage time and risk* · *self-starters with growth mindsets* · *personable and humorous* *How to Apply: * Visit our website at www.bikeworks.org for more information about Bike Works. Email your resume and cover letter to: programs(a)bikeworks.org *NO PHONE CALLS PLEASE* *Applications accepted until Saturday November 25th at 5pm* *We plan to make the offer by 12/15* *Job starts on 1/2/2018* -- Tina Bechler Program Director (206) 695-2741 bikeworks.org <http://www.bikeworks.org/> Mission: Bike Works promotes the bicycle as a vehicle for change to empower youth and build resilient communities Vision: Mobilized people. Thriving communities. Healthy planet.

1 0

Automated bike sharing programs
by Tigre Bici 22 Oct '17

22 Oct '17

Hello everyone! It seems our university finally got the idea on making a bicycle sharing program within campus premises. We are investigating which are the best/cheaper ones to launch it soon. We have seen the zagster and the bike docks that are unlock via a smartphone. We dont have much information only that they want it to be automatic and with aprox 70 bikes for starter. Do you know any systems that are available outside the US? Thanks in advance R.

4 3

Re: [TheThinkTank] Bike Trailer for Transporting Bikes
by cyclista＠inventati.org 22 Oct '17

22 Oct '17

Oops!! Didn't cc the list. Also forgot to add that u-post used for fencing is dirt cheap, and if you get wide enough ones, would make excellent channels. -Cyclista On 2017-10-19 20:22, cyclista(a)inventati.org wrote: > Anna, > > A go-to hauling method for me is always an adapted child trailer. > Interestingly, when I went to look at the Pedal to the People trailer, > the construction was basically the same, just enlarged and reinforced > a little. The kickstand on the linkage was a clever addition that I > plan to add to my trailers. > > How many you can haul without a motor is also a matter of your > terrain. If you're mostly in flatland, you can haul quite a lot, and > on that kind of terrain I've hauled as many as ten framesets or so, > which would translate weight-wise into at least four bikes, if not > more. > > I've always just piled them up strategically. BUT - I've had a plan > for awhile now to basically replicate the car roof rack device, which > is often a flimsier version of the device used on the fronts of city > buses, and attach it to one of my trailer setups. > > I estimate that without modifying the child trailer's frame I could > easily fit three bikes, if they were flipped so that the handlebars > aren't running into each other. In other words, one facing backwards > and two facing forwards (or the opposite). > > So, you could either acquire some roof rack tracks by donation - put > out the call and I bet you'll get them - or at a thrift store or > Craigslist or whatever. > > Or you could do what I've been planning and get some angle (L cross > section) bar stock, preferably aluminum, and make your own channels. > > The tricky part is replicating the grabber used on buses that goes > over the front wheel. I'd probably just make the whole thing using > telescoping tubes and a spring from the hardware store, and make the > hook out of whatever, but other people might have some ideas on > cheaper or simpler ways to hold the bike up and in the tracks. I'd > love to hear them!! > > -Cyclista > > > On 2017-10-19 20:03, Anna Weier wrote: >> I was thinking of about 4 at a time, but I would also be happy with 2. >> >> Anna >> >> Anna Weier >> UMCycle Manager >> University of Manitoba Students' Union >> tel: 204.474.8484 >> @MyUMSU >> >> >> >> -----Original Message----- >> From: cyclista(a)inventati.org [mailto:cyclista@inventati.org] >> Sent: October 19, 2017 2:53 PM >> To: The Think Tank <thethinktank(a)lists.bikecollectives.org> >> Cc: Anna Weier <Anna.Weier(a)umsu.ca> >> Subject: Re: [TheThinkTank] Bike Trailer for Transporting Bikes >> >> Anna, >> >> How many bikes do you need to transport at a time? >> >> -Cyclista >> >> >> On 2017-10-19 19:17, Anna Weier wrote: >>> Hi folks, >>> I'm on a campus where our main location is small and our warehouse >>> location is far enough away that it's a pain to bring parts and bikes >>> back and forth. I'm looking for plans or the actual trailer for sale >>> for a bike trailer that can carry complete bikes. I would also be >>> interested in hearing from folks who have transported bikes by bike. >>> Is this a situation where an e-bike might be required? >>> >>> Anna >>> >>> Anna Weier >>> UMCycle Manager >>> University of Manitoba Students' Union >>> tel: 204.474.8484, website: >>> umsu.ca<http://umsu.ca/businesses/umcycle/> >>> Shop Hours: Monday - Friday, 10:30am - 1:30pm Community Stand Time: >>> Thursday, 1:30 - 4pm >>> 101 University Centre, U of Manitoba, Winnipeg, MB, R3T 2N2 >>> @MyUMSU<https://www.instagram.com/myumsu/> >>> [IQsOpen_EmailSig_250x90]<https://umsu.ca/businesses/iqs/> >>> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: >>> http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollecti >>> ves.org

3 2

Bike Trailer for Transporting Bikes
by Anna Weier 19 Oct '17

19 Oct '17

Hi folks, I'm on a campus where our main location is small and our warehouse location is far enough away that it's a pain to bring parts and bikes back and forth. I'm looking for plans or the actual trailer for sale for a bike trailer that can carry complete bikes. I would also be interested in hearing from folks who have transported bikes by bike. Is this a situation where an e-bike might be required? Anna Anna Weier UMCycle Manager University of Manitoba Students' Union tel: 204.474.8484, website: umsu.ca<http://umsu.ca/businesses/umcycle/> Shop Hours: Monday - Friday, 10:30am - 1:30pm Community Stand Time: Thursday, 1:30 - 4pm 101 University Centre, U of Manitoba, Winnipeg, MB, R3T 2N2 @MyUMSU<https://www.instagram.com/myumsu/> [IQsOpen_EmailSig_250x90]<https://umsu.ca/businesses/iqs/>

2 1

Re: [TheThinkTank] mobile workshop?
by Rick Nonnekes 17 Oct '17

17 Oct '17

Mikey, Cycle Transitions is having challenges finding a suitable location at a reasonable cost so we're looking at alternative models to the traditional fixed location. One of these is a storage unit plus a mobile workshop - whether that be a smaller one pulled by a bike or a larger one either pulled by a vehicle or is a panel van of sorts. Ideally the unit would be able to meet the needs of servicing most repairs and and/or have the equipment for the safe cycling courses we do out on location. Rick Cycle Transitions On Oct 11, 2017 2:21 PM, "Michael Young" <michael(a)westtownbikes.org> wrote: > Do you intend to carry replacement parts? Whats your budget? How will it > be transported? I attached a document of our common tool layout when > working on basic bikes. Add a spoke wrench bottom brack tool and > cassette/freewheel tools. > > Mikey > > > On Oct 10, 2017 4:15 PM, "Rick Nonnekes" <rnonnekes(a)gmail.com> wrote: > >> We serve a member and customer base that used mostly low to mid level >> urban and hybrid bikes. >> >> Rick >> Cycle Transitions >> >> On Oct 10, 2017 12:58 PM, "Michael Young" <michael(a)westtownbikes.org> >> wrote: >> >>> What work (type of service) on what bikes do you anticipate? >>> >>> Mikey >>> West Town Bikes >>> >>> >>> On Oct 10, 2017 12:48 PM, "Rick Nonnekes" <rnonnekes(a)gmail.com> wrote: >>> >>> Does any group out there have a mobile workshop? Or have experience >>> and/or suggestions on the size, set-up for a good mobile workshop? We're >>> pursuing the idea of making one and would love to hear from others about >>> their experience with this method of meeting the needs in the community and >>> if there are any ideal models. >>> >>> (I've looked to see if there are past posts on this subject but the >>> search engine doesn't seem to be working right now.) >>> >>> Rick >>> Cycle Transitions >>> Cobourg, ON >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >>> >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >>> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > >

2 1

Re: [TheThinkTank] Thethinktank Digest, Vol 133, Issue 1
by Lawrence Mohammed 15 Oct '17

15 Oct '17

Hi, We've started to offer basic 'health checks' (gear and brake tune ups mainly, plus diagnosing major issues and signposting to servicing/fixes outside the scope of these checks) from a mobile rig Previously carried a Park Tools stand under one arm and had all tools in an army rucksack and cycled to events - not ideal though for my back (and couldn't ask volunteers to do the same really!) I modified a broken trolley I found on the street & made a mini tool rack from leftover trolley tubing, broken broom handle and a bit of aluminium plate Also affixed another plate to the bottom of the Park Tools allen key holder to make a benchmounted holder All the tools fit in the Park Tools box as shown Gloves and lube, folder, first aid kit, rags, etc carried in the army rucksack Trailer easily carries two workstands and tools, could probably carry 3 stands with no problem Added detail of the hitch if useful... Maybe a smaller scale than what you're doing? I wanted to keep things simple, also, we have very limited storage space in a high crime area - this 'trolley trailer' can be bought inside and stands upright, taking up very little room at the back of our workshop This design also allows us to bring our signage stand and cable it on site (making the stand able to used on windy days) -- Warmest regards, *Lawrence Mohammed* Director & Head Mechanic Pro Bike Service C.I.C. *+44 (0)77 222 58587* *probikeservice.co.uk <https://probikeservice.co.uk>* *facebook.com/probikeservice <https://www.facebook.com/professionalbikeservice>* /[Location, NOT delivery address] Pro Bike Service C.I.C. Mobile Garden City Olympic Village London E20 1GW/ On 12/10/17 21:09, thethinktank-request(a)lists.bikecollectives.org wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > > Today's Topics: > > 1. Re: mobile workshop? (Rick Nonnekes) > 2. Re: mobile workshop? (Deb Salls) > 3. Re: mobile workshop? (Rick Nonnekes) > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… / /

2 1

Re: [TheThinkTank] mobile workshop?
by Deb Salls 11 Oct '17

11 Oct '17

Hi All W e have had our BikeMobile, a mobile bike shop on wheels, for a few years. It is a 24 foot step van ( the same size and type as a fedex truck) we received a grant and donations for the truck and build out. We operate on sliding scale basis and do both full price and free services fairly well. We go to parks and community centers all summer long and provide free repair for youth. and then do corporate contracts and events for pay. contact me at deb(a)bikeworks.org if you want more into, pics, specs etc. Here is a picture and description https://bikeworks.org/bike-shop/mobile-bike-shop-find-bikemobile/ Deb On Wed, Oct 11, 2017 at 11:03 AM, Adam Smith <adam(a)boisebicycleproject.org> wrote: > Rick, > > I'm the Youth Educator at the Boise Bicycle Project and we have been > running mobile repair for about a year now. We use a Surly Bill trailer as > our base and are on our second rendition of how we carry supplies. As far > as locations served we focus on community centers, after school programs, > and apartment complexes in high need areas. Currently we have a custom > built box for the trailer that fits the footprint exactly. Inside the > custom box we fit cables, housing, brake pads, ferrules, chains, grease, > chain lube, took kits, tubes, patch kids and stands (I probably missed some > things too). We focus on kids bike repairs so most of our repairs are flats > and brake issues. We emphasize that we are able to do basic repairs and are > not a fully stocked shop, so in some cases folks are referred to our brick > and mortar. > > To pull the trailer, which weighs a ridiculous amount so I'm not going to > speculate, we have a surly Ogre with an electric assist. Before we had the > custom built box I was hauling it around without an assist using my old > Fisher commuter bike. The box helps to protect from the elements as we > sometimes travel in rainy, wet conditions but it does add a lot of weight. > I'll attach some pictures of our current set up and of our old if I can > find pictures from then. Hope this is a start to what you're looking for. > > > 20160621_174955.jpg > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B4x04TgoXU1nQ0dU…> > > 20170524_162924.jpg > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B4x04TgoXU1nQ0FO…> > > 2017_Whittier_Fix_It_1.JPG > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B10Ns0_hZp72cFFp…> > > > > On Tue, Oct 10, 2017 at 11:48 AM, Rick Nonnekes <rnonnekes(a)gmail.com> > wrote: > >> Does any group out there have a mobile workshop? Or have experience >> and/or suggestions on the size, set-up for a good mobile workshop? We're >> pursuing the idea of making one and would love to hear from others about >> their experience with this method of meeting the needs in the community and >> if there are any ideal models. >> >> (I've looked to see if there are past posts on this subject but the >> search engine doesn't seem to be working right now.) >> >> Rick >> Cycle Transitions >> Cobourg, ON >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > -- > Ride on right on, > > Adam P. Smith > Youth Education Specialist > Boise Bicycle Project > > 1027 S. Lusk Street > Boise, ID 83706 > 208.429.6520 <(208)%20429-6520> > www.boisebicycleproject.org > > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > -- Deb Salls Executive Director 206-695-2607 bikeworks.org Bike Works promotes the bicycle as a vehicle for change to empower youth and build resilient communities.

1 0

Re: [TheThinkTank] mobile workshop?
by Rick Nonnekes 11 Oct '17

11 Oct '17

Thanks Adam. Yes, this is helpful, and I really like the fact that you're using an electric assist bike to pull the trailer! Rick On Wed, Oct 11, 2017 at 2:03 PM, Adam Smith <adam(a)boisebicycleproject.org> wrote: > Rick, > > I'm the Youth Educator at the Boise Bicycle Project and we have been > running mobile repair for about a year now. We use a Surly Bill trailer as > our base and are on our second rendition of how we carry supplies. As far > as locations served we focus on community centers, after school programs, > and apartment complexes in high need areas. Currently we have a custom > built box for the trailer that fits the footprint exactly. Inside the > custom box we fit cables, housing, brake pads, ferrules, chains, grease, > chain lube, took kits, tubes, patch kids and stands (I probably missed some > things too). We focus on kids bike repairs so most of our repairs are flats > and brake issues. We emphasize that we are able to do basic repairs and are > not a fully stocked shop, so in some cases folks are referred to our brick > and mortar. > > To pull the trailer, which weighs a ridiculous amount so I'm not going to > speculate, we have a surly Ogre with an electric assist. Before we had the > custom built box I was hauling it around without an assist using my old > Fisher commuter bike. The box helps to protect from the elements as we > sometimes travel in rainy, wet conditions but it does add a lot of weight. > I'll attach some pictures of our current set up and of our old if I can > find pictures from then. Hope this is a start to what you're looking for. > > > 20160621_174955.jpg > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B4x04TgoXU1nQ0dU…> > > 20170524_162924.jpg > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B4x04TgoXU1nQ0FO…> > > 2017_Whittier_Fix_It_1.JPG > <https://drive.google.com/a/boisebicycleproject.org/file/d/0B10Ns0_hZp72cFFp…> > > > > On Tue, Oct 10, 2017 at 11:48 AM, Rick Nonnekes <rnonnekes(a)gmail.com> > wrote: > >> Does any group out there have a mobile workshop? Or have experience >> and/or suggestions on the size, set-up for a good mobile workshop? We're >> pursuing the idea of making one and would love to hear from others about >> their experience with this method of meeting the needs in the community and >> if there are any ideal models. >> >> (I've looked to see if there are past posts on this subject but the >> search engine doesn't seem to be working right now.) >> >> Rick >> Cycle Transitions >> Cobourg, ON >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > -- > Ride on right on, > > Adam P. Smith > Youth Education Specialist > Boise Bicycle Project > > 1027 S. Lusk Street > Boise, ID 83706 > 208.429.6520 <(208)%20429-6520> > www.boisebicycleproject.org > > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > >

1 0

Neighborhood Bike Works is hiring a Lead Mechanic in our Community Bike Shop
by Steve Maluk 26 Sep '17

26 Sep '17

Neighborhood Bike Works (in Philadelphia) is hiring for a Lead Mechanic position in our earned-revenue Community Bike Shop. Please help us spread the word. The job description is below, and also attached as a pdf... *Bike Shop Lead Mechanic – Neighborhood Bike Works* *Neighborhood Bike Works (NBW) *inspires youth and strengthens Philadelphia communities by providing equitable access to bicycling and bike repair through education, recreation, leadership, and career building opportunities. NBW offers after-school and summer programming to youth, runs adult bike repair programming, and operates a community bike shop as a source of earned revenue for our non-profit organization. *Position Summary: *Neighborhood Bike Works is seeking a part-time *Bike Shop Lead Mechanic* in our Community Bike Shop. This position is responsible for repairing and refurbishing used bicycles for sale in our earned-revenue bike shop, and assists members of the public in finding bikes, bike parts, and accessories sold in our shop. Additionally, this position will greet members of our community from various stakeholder groups, including youth, parents, volunteers, donors, and adult program participants. The Lead Mechanic works alongside volunteers to assist the public during NBW’s Bike Church hours. This position is expected to model NBW’s values of access, equity, and in creating and maintaining a safe space at NBW. *Reports to: *Shop Manager *Start Date & Work Schedule: * The preferred start date for this position is November 6, 2017. This part-time position will work 30 hours-per-week during our shop’s peak season (April 1 to September 30) and 20 hours-per-week during the off-season (October 1 to March 31). The position will include some evening and weekend work, and is based at our Community Bike Shop and headquarters at 3939 Lancaster Avenue in West Philadelphia. *Primary Responsibilities* · Repair and refurbish bicycles to a saleable quality, assess value of bicycles, and sell bicycles during our Community Shop time. · Deliver helpful customer service to a diverse base of customers and volunteers during Bike Church and the Community Bike Shop. · Assist patrons with bike repairs during Bike Church hours, ensuring the focus remains on learning and empowerment for Bike Church patrons. · Support daily shop operations including daily setup and closing of workshop areas and sales floor, organizing product for sale, answering phone, cleaning, and light facilities projects. · Support Donations Coordinator in keeping inventory organized and sorting bike donations. *Qualifications:* The ideal candidate will have 2+ years of experience as a bike mechanic, a year or more of work experience in a bike shop or another customer-focused retail environment, will exhibit excellent communication and customer service skills, and be skilled in the use of a wide range of bicycle tools and the repair of bicycles built from the 1970’s and later. Candidates with non-traditional work and education experience are encouraged – please tell us about those experiences that qualify you for this position. Additional Qualifications: · Driven by the mission and work of NBW. · Commitment to social justice and youth leadership. · Willingness to work as a team player with other staff, volunteers, and youth. · Reliable, self-motivated, and with a keen attention to detail. · Sense of humor, patience, and flexibility. NBW is a collaborative and fast-paced work environment. · Ability to lift up to 50 pounds. · License to drive a motor vehicle in Pennsylvania, preferred. · Successful passing of PA State Police Criminal Background Check, Pennsylvania Child Abuse History Clearance, and FBI Clearance required. *Compensation:* This is a part-time, non-exempt, hourly position. The starting pay range for this position will be $12.50 to $14.75 per hour, depending on experience and qualifications. NBW offers a competitive benefits package, including health, dental, and retirement plans. Additionally, NBW offers the equivalent of two weeks of paid vacation (50 hours) for the employee in the first year of this position, as well as personal paid time off, and an employee purchase benefit on bicycles, parts, and accessories. *To apply for this position, please email a resume and cover letter* to jobs(a)neighborhoodbikeworks.org, with “Lead Mechanic Position” as the subject heading of your email. Applications received by October 11, 2017 will receive priority consideration. We are an Equal Opportunity Employer and actively seek staff who reflect the community we serve. Candidates of color are encouraged to apply. --- Steve Maluk He/Him/His Executive Director *Neighborhood Bike Works <http://neighborhoodbikeworks.org>* <215-386-0316%20x%20113>215-386-0316 x118 *Join NBW at** Youth Bike Summit* *2017* *----------------------------------------------* October 6-8, 2017 Arlington, VA + Washington, DC [image: ybs-2017-postcard-orange-reduced] <http://youthbikesummit.org>

1 0

Used Bikes Available - Panhandle of Florida
by Kyle Wagenschutz 25 Sep '17

25 Sep '17

Hey folks, Recently, I received a request from a bike rental operator located in the panhandle of Florida looking for a new home each year for their used bicycle fleet. It was described to me that about 700 bikes are available for free on an annual basis - the owner only wants the bikes to be picked up from their location. As described to me, the bikes are in working condition and have about one season of rental wear and tear on them. Currently, the owner is taking the bikes to the scrapyard as they are replaced. If anyone has any interest, please feel free to send me a note and I’ll connect you directly with the owner of the bike tour company. Best, Kyle Wagenschutz Director of Local Innovation PeopleForBikes P.O. Box 2359 / Boulder, CO 80306 EMAIL: kyle(a)peopleforbikes.org <mailto:kyle@peopleforbikes.org> MOBILE: 303.886.8288 PeopleForBikes.org <http://peopleforbikes.org/>BigJumpProject.org <http://www.bigjumpproject.org/>

8 8

Burning Man Bikes
by Jonathan Rosenbaum 20 Sep '17

20 Sep '17

Heads up, according to a friend of mine who just came back from Burning Man in Nevada, many, many bikes were left abandoned after the event. According to the event's webpage [1]: Love 'Em… and Please Don't Leave 'Em Leave no trace. A bike is a BIG trace. Somehow it's become a common myth (playa legend, perhaps?) that it's perfectly acceptable to leave your bike behind upon striking your camp. Nothing could be further from the truth. If you pack it in, pack it out! However, apparently, it is perfectly acceptable to leave bikes behind, so there may still be lot's of bikes for bike projects in the region of Black Rock, Nevada to gather up. Something definitely to look into if it hasn't already been. -Jonathan Links: ------ [1] https://burningman.org/event/preparation/getting-around/bikes/

4 4

Choosing Leaders
by Josh Bisker 19 Sep '17

19 Sep '17

Hello compadres! So, we're trying to go from a create squads to handle different arenas of planning and activity -- like Shop Management, Communications, Programming, Volunteer Coordination, Partnerships, etc. Each squad will have a captain. *Here's the request for help: *We're looking for your insight and experience to help us figure out how to pick our captains, especially this first time. - How have you dealt with electing / selecting leaders? - What lessons have you learned about good ways to do this? - How about bad ways to do this? What should we be careful of? - How can we best inoculate ourselves against interpersonal conflicts muddying the process? - Are there anonymous voting systems, consensus systems, or other systems you recommend for this kind of thing? (FYI, our group is nascent enough that we don't yet have a strong consensus model in place for making big decisions.) For reference about captains in specific: - Captains are the squad’s points-of-contact, coordinators for its activities, and default squad spokespeople. They’re responsible for the squad’s workflow, and for communicating with the collective about the squad’s initiatives, progress, and needs -- also for structuring how volunteers can participate in the squad’s activities. - Captains’ stated mission also includes supporting and engaging with ideas from their squad members and from the larger collective too -- and calling for extra teamwork when the squad needs it. More about the squads model from me soon, but in the mean time some feedback here would be grrrrrreat! Kisses, Josh Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

6 5

Free parts to share
by Rafaell Rozendo 18 Sep '17

18 Sep '17

Hi all, Raf here from Bici Centro in Santa Barbara. We have an excess of parts donated by Trek and would like to share them. A list of the items is below with approximate quantities. Unfortunately, we can't ship them for free :( I will calculate shipping of the items for you and can provide packing supplies. We have Paypal, but could also take credit/debit payments towards shipping cost. Shipping is around $20-$40 for US and US territories and around $60-$80 outside of US (estimate for medium size box). If anyone knows a way to save on shipping please share. If you are interested, send me your zip or city/state or province/country. If not, please ignore! -Raf List of items Item description Qty. Possible use Original price Clip-on handlebar flower >50 Gift for fundraiser, promo $10 Bike bell >50 Gift for fundraiser, promo $10 Valve caps, cute colorful ones! >50 Gift for fundraiser, promo $5 Grips, dotted ~30 Shop, sun resistant, long wearing $20 Grips, plain ~30 Shop, sun resistant, long wearing $20 Tire, Bontrager 29x2.2 MTB ~30 MTB event support $35 Cartridge, thread-on 20g >50 MTD or road ride support $4 Tube, Bontrager 27.5x3.5-4.0 PV >50 Winter fatbike ride or event $18

4 5

Youth Bike Summit // National Youth Bike Ride
by Pasqualina Azzarello 15 Sep '17

15 Sep '17

Hi Everyone, We hope you'll join us at the 7th annual Youth Bike Summit, taking place *October 6-8, 2017* in Arlington, VA and hosted by Phoenix Bikes! We've got an exciting line-up of speakers, workshops, and activities <https://youthbikesummit.org/2017-event-schedule/>! And we're launching the first-ever National Youth Bike Ride <https://t.e2ma.net/click/iuhfu/ac6fm/2xhhpe>! Register to attend the Youth Bike Summit here <http://youthbikesummit2017.brownpapertickets.com/> - and if you're coming in from out of town, please book your lodging at the Hyatt Regency Crystal City <https://aws.passkey.com/event/49087660/owner/10336/home>, where the YBS will be held. Hyatt is offering a generous discount to all YBS attendees - simply book through the above link and rooms are $129/night for up to 4 people. Can't attend? Please consider sponsoring a local youth <https://youthbikesummit.org/support-ybs17/> to attend the three-day conference! Hope to see you all in October! Best, Pasqualina -- *Pasqualina Azzarello* Director, Youth Bike Summit Website <https://youthbikesummit.org/> | Facebook <https://www.facebook.com/youthbikesummit/?fref=ts> | Twitter <https://twitter.com/youthbikesummit> | Instagram <https://www.instagram.com/youthbikesummit/> @youthbikesummit #YBS17 *JOIN US! * *Youth Bike Summit* Hosted by Phoenix Bikes in Arlington, VA October 6 - 8, 2017 // Arlington, VA / Washington, DC

2 1

Chain tensioners anyone?
by Thomas Butler 15 Sep '17

15 Sep '17

This is a total shot in the dark, but if anyone has use for (up to) an entire box of these chain tensioners, please suggest a way for us to get them to you. Not spring loaded, but they are brand new. direct from NuVinci.

3 5

Exchange Program Blueprinting Session this Sunday in Chicago
by Robert Grossman 13 Sep '17

13 Sep '17

Hello Friends and Allies We will be meeting at Working Bikes, in Chicago, this Sunday at 4:45pm to work on the Exchange Program blueprint. In this session we will be filling in ideas into a matrix. The categories we will be filling in are Touchpoints, People Involved, Systems, Policy, Fact/Observation, Metric/Data, Questions/Unknowns, Critical Moments, Ideas/Opportunities, and Phase Timeline. We have already broken the program down into its key steps. This session will simply be a brainstorm for each of those categories for each step. Please feel free to share your insights even if you can't make the session and I will plug them into the blueprint.

3 3

Re: [TheThinkTank] Chain tensioners anyone?
by Thomas Butler 11 Sep '17

11 Sep '17

Photo and location--Austin Texas On Sep 11, 2017 18:37, wrote: This is a total shot in the dark, but if anyone has use for (up to) an entire box of these chain tensioners, please suggest a way for us to get them to you. Not spring loaded, but they are brand new. direct from NuVinci.

2 1

Re: [TheThinkTank] Chain tensioners anyone?
by alexander＠whitepariah.com 11 Sep '17

11 Sep '17

1 0

Re: [TheThinkTank] Used Bike Cables
by Thomas Butler 11 Sep '17

11 Sep '17

You'd think that it would be a pain to pull out and replace all the cables blocking in the one you need, but it's actually pretty easy. Sent from Austin's Yellow Bike Project. On Sep 10, 2017 21:06, "MoBo Bicycle Co-op" <mobobicyclecoop(a)gmail.com> wrote: Only keep rear cables, front are unusable for most applications. Coil them up and they can hang on a hook or nail. The chain trick sounds even better, though. Shorter lengths of housing can go in different height food containers, i.e. 6" in SunMaid raisin bin, 1ft in Pringles can. I've spent too much time thinking about this to have not made a PVC organizer for this.... -Nate On Sep 8, 2017 1:32 PM, "Eric Brozell" <eric(a)bikeerie.org> wrote: > Hello Think Tankers, > > Does anyone have a suggestion for organizing brake and shifter cables? We > have wads of them and find it difficult to have them laid out. > > Eric Brozell > Bike Erie BOD > Pedal Mettle Community Bike Shop > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives.o > rg/options.cgi/thethinktank-bikecollectives.org > > ____________________________________ The ThinkTank mailing List Unsubscribe from this list here: http://lists.bikecollectives. org/options.cgi/thethinktank-bikecollectives.org

1 0

Re: [TheThinkTank] Used Bike Cables
by Thomas Butler 11 Sep '17

11 Sep '17

You'd think that it would be a pain to pull out and replace all the cables blocking in the one you need, but it's actually pretty easy. Sent from Austin's Yellow Bike Project. On Sep 10, 2017 21:06, "MoBo Bicycle Co-op" <mobobicyclecoop(a)gmail.com> wrote: Only keep rear cables, front are unusable for most applications. Coil them up and they can hang on a hook or nail. The chain trick sounds even better, though. Shorter lengths of housing can go in different height food containers, i.e. 6" in SunMaid raisin bin, 1ft in Pringles can. I've spent too much time thinking about this to have not made a PVC organizer for this.... -Nate On Sep 8, 2017 1:32 PM, "Eric Brozell" <eric(a)bikeerie.org> wrote: > Hello Think Tankers, > > Does anyone have a suggestion for organizing brake and shifter cables? We > have wads of them and find it difficult to have them laid out. > > Eric Brozell > Bike Erie BOD > Pedal Mettle Community Bike Shop > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives.o > rg/options.cgi/thethinktank-bikecollectives.org > > ____________________________________ The ThinkTank mailing List Unsubscribe from this list here: http://lists.bikecollectives. org/options.cgi/thethinktank-bikecollectives.org

1 0

Re: [TheThinkTank] Chain tensioners anyone?
by Thomas Butler 11 Sep '17

11 Sep '17

Photo and location--Austin Texas On Sep 11, 2017 18:37, wrote: This is a total shot in the dark, but if anyone has use for (up to) an entire box of these chain tensioners, please suggest a way for us to get them to you. Not spring loaded, but they are brand new. direct from NuVinci.

1 0

Re: [TheThinkTank] Thethinktank Digest, Vol 132, Issue 7
by Genevieve Parker 11 Sep '17

11 Sep '17

RBP has cables strung thru links of a bike chain, nailed to the wall. Simple, not much organization to it, keeps things clean. Genevieve Parker RBP Program Director http://www.renobikeproject.com/ On Mon, Sep 11, 2017 at 1:13 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. Re: Used Bike Cables (Ron/Joe King/Maneiro) > 2. Re: Used Bike Cables (MoBo Bicycle Co-op) > > > ---------- Forwarded message ---------- > From: "Ron/Joe King/Maneiro" <recyclebikesforkids(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Sun, 10 Sep 2017 20:27:22 -0500 > Subject: Re: [TheThinkTank] Used Bike Cables > Eric, > We drill about 100 holes in a piece of 1X board. Mount it to the wall > using shelf brackets and string the cables through it by length and style. > Works for us. > Recycle Bikes for Kids > > Sent from my iPhone > > > On Sep 10, 2017, at 12:33 AM, cyclista(a)inventati.org wrote: > > > > lol > > > > -Cyclista > > > > > >> On 2017-09-08 18:02, Josh Bisker wrote: > >> Oh man Eric you are going to be so pumped when your latest ThinkTank > Digest > >> comes in > >> Josh Bisker > >> 914-500-9890 > >> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> > >> 596 Acres <http://596acres.org/> > >> Bindlestiff Family Cirkus <http://bindlestiff.org/> > >>> On Fri, Sep 8, 2017 at 1:32 PM, Eric Brozell <eric(a)bikeerie.org> > wrote: > >>> Hello Think Tankers, > >>> Does anyone have a suggestion for organizing brake and shifter cables? > We > >>> have wads of them and find it difficult to have them laid out. > >>> Eric Brozell > >>> Bike Erie BOD > >>> Pedal Mettle Community Bike Shop > >>> ____________________________________ > >>> The ThinkTank mailing List > >>> Unsubscribe from this list here: http://lists.bikecollectives. > >>> org/options.cgi/thethinktank-bikecollectives.org > >> ____________________________________ > >> The ThinkTank mailing List > >> Unsubscribe from this list here: > >> http://lists.bikecollectives.org/options.cgi/thethinktank- > bikecollectives.org > > ____________________________________ > > > > The ThinkTank mailing List > > > > Unsubscribe from this list here: http://lists.bikecollectives. > org/options.cgi/thethinktank-bikecollectives.org > > > > > > ---------- Forwarded message ---------- > From: MoBo Bicycle Co-op <mobobicyclecoop(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Sun, 10 Sep 2017 22:06:14 -0400 > Subject: Re: [TheThinkTank] Used Bike Cables > Only keep rear cables, front are unusable for most applications. Coil them > up and they can hang on a hook or nail. The chain trick sounds even better, > though. > > Shorter lengths of housing can go in different height food containers, > i.e. 6" in SunMaid raisin bin, 1ft in Pringles can. I've spent too much > time thinking about this to have not made a PVC organizer for this.... > > -Nate > > On Sep 8, 2017 1:32 PM, "Eric Brozell" <eric(a)bikeerie.org> wrote: > >> Hello Think Tankers, >> >> Does anyone have a suggestion for organizing brake and shifter cables? We >> have wads of them and find it difficult to have them laid out. >> >> Eric Brozell >> Bike Erie BOD >> Pedal Mettle Community Bike Shop >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > >

1 0

Used Bike Cables
by Eric Brozell 10 Sep '17

10 Sep '17

Hello Think Tankers, Does anyone have a suggestion for organizing brake and shifter cables? We have wads of them and find it difficult to have them laid out. Eric Brozell Bike Erie BOD Pedal Mettle Community Bike Shop

6 5

Any Experience With Getting Bicycles/Bicycle Repair to Folks in Haiti?
by Jimmy Hallyburton 09 Sep '17

09 Sep '17

Just wanted to check in to see if any of you have worked with any bicycle projects/programs in Haiti? I'm heading down in November to teach some housing construction and bicycle repair classes and am curious what sort of bicycle resources might be available in the community? Is there a local source for affordable bicycles and parts? Are there organizations currently shipping bicycles to Haiti? How accessible is bicycle repair in cities and rural areas? Have there been any attempts to assist with DIY community bicycle shops? I'll be bringing a bicycle to ride around on as well as some toolsets to leave behind with class participants. I haven't been able to find a lot of information about the bicycle community in Haiti and would love hear any thoughts, ideas, or insights. Ride On! Jimmy Hallyburton Founder / Executive Director Boise Bicycle Project (208)-429-6520 1027 Lusk St Boise, ID 83706 www.boisebicycleproject.org Explore some of the BBP Journey in my TEDx Talk on Moving at the Speed of Discovery <https://youtu.be/yDubr-RjlCE?t=6s>!

3 2

Prices of New Cables and Housing?
by Josh Bisker 08 Sep '17

08 Sep '17

Hey, how do folks price their new cables and housing? And howzabout you recycled cables and housing? Is this an area in which it's ok to underprice the retail markup of commercial shops, and if so what's the rationale for doing so per se? We have our FIRST EVER batch of new cables and there are a number of ideas about how to price them. Help us with your wisdom, fam. Josh Bisker 914-500-9890 New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> 596 Acres <http://596acres.org/> Bindlestiff Family Cirkus <http://bindlestiff.org/>

10 9

Re: [TheThinkTank] Thethinktank Digest, Vol 132, Issue 2
by Tegan Moss 06 Sep '17

06 Sep '17

At B!KE in Peterborough Ontario we charge $4 per cable and $2 per foot for housing. All our cables are stainless and all the housing is slick-lined. The prices are all tax inclusive. At that price you can re-cable a bike for less than $30. On Wed, Sep 6, 2017 at 4:13 PM, < thethinktank-request(a)lists.bikecollectives.org> wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > Today's Topics: > > 1. Prices of New Cables and Housing? (Josh Bisker) > 2. Re: Prices of New Cables and Housing? (Scott Long) > 3. Re: Prices of New Cables and Housing? (Arlin Schaffel) > 4. Re: Prices of New Cables and Housing? (Gabriel Trainer) > 5. Re: Prices of New Cables and Housing? (Reno Bikes) > 6. Re: Prices of New Cables and Housing? (LaBikery) > 7. Re: Prices of New Cables and Housing? (Shannon Southwood) > 8. Re: Prices of New Cables and Housing? (Michael Young) > 9. Re: Prices of New Cables and Housing? (Ainsley Naylor) > 10. Hiring an Education Coordinator at Community Cycles, Boulder > CO (Sue Prant) > > > ---------- Forwarded message ---------- > From: Josh Bisker <jbisker(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 5 Sep 2017 18:06:09 -0400 > Subject: [TheThinkTank] Prices of New Cables and Housing? > Hey, how do folks price their new cables and housing? And howzabout you > recycled cables and housing? Is this an area in which it's ok to underprice > the retail markup of commercial shops, and if so what's the rationale for > doing so per se? > > We have our FIRST EVER batch of new cables and there are a number of ideas > about how to price them. Help us with your wisdom, fam. > > Josh Bisker > 914-500-9890 <(914)%20500-9890> > New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> > 596 Acres <http://596acres.org/> > Bindlestiff Family Cirkus <http://bindlestiff.org/> > > > ---------- Forwarded message ---------- > From: Scott Long <scott.m.long(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 5 Sep 2017 18:15:50 -0400 > Subject: Re: [TheThinkTank] Prices of New Cables and Housing? > We get ours from QBP in the box of 100. They cost us $0.33 cents each. We > don't sell them directly to the public for the most part, but we use them > in repairs and they go for $1 each. We reuse housing for the most part so > the cost is almost nothing. > > On Sep 5, 2017 6:07 PM, "Josh Bisker" <jbisker(a)gmail.com> wrote: > > Hey, how do folks price their new cables and housing? And howzabout you > recycled cables and housing? Is this an area in which it's ok to underprice > the retail markup of commercial shops, and if so what's the rationale for > doing so per se? > > We have our FIRST EVER batch of new cables and there are a number of ideas > about how to price them. Help us with your wisdom, fam. > > Josh Bisker > 914-500-9890 <(914)%20500-9890> > New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> > 596 Acres <http://596acres.org/> > Bindlestiff Family Cirkus <http://bindlestiff.org/> > > ____________________________________ > > The ThinkTank mailing List > > Unsubscribe from this list here: http://lists.bikecollectives.o > rg/options.cgi/thethinktank-bikecollectives.org > > > > > > ---------- Forwarded message ---------- > From: Arlin Schaffel <arlin(a)bridgecitybicyclecoop.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 5 Sep 2017 16:16:18 -0600 > Subject: Re: [TheThinkTank] Prices of New Cables and Housing? > We don't keep old housing / cables as we've had problems in the past with > proper storage and also just generally being too rusted to use again. > > We have a suggested donations list and currently have cables at > $1.00/cable & housing at $0.50/ft. This is definitely undercutting shops > but it hasn't been an issue for us thus far. Possibly due to us serving > different clients than our local shops. > > Attached is our Suggested Price List. I believe we started with the > Suggested Donation list from the Bike Dump in Winnipeg (thanks!) and > modified from there. > > > *Arlin Schaffel* > *Bridge City Bicycle Co-op* > http://bridgecitybicyclecoop.com > facebook.com/bridgecitybicyclecoop/ > twitter.com/the_bcbc > > On Tue, Sep 5, 2017 at 4:06 PM, Josh Bisker <jbisker(a)gmail.com> wrote: > >> Hey, how do folks price their new cables and housing? And howzabout you >> recycled cables and housing? Is this an area in which it's ok to underprice >> the retail markup of commercial shops, and if so what's the rationale for >> doing so per se? >> >> We have our FIRST EVER batch of new cables and there are a number of >> ideas about how to price them. Help us with your wisdom, fam. >> >> Josh Bisker >> 914-500-9890 <(914)%20500-9890> >> New York Mechanical Gardens Bike Co-op <http://bikecoop.nyc/> >> 596 Acres <http://596acres.org/> >> Bindlestiff Family Cirkus <http://bindlestiff.org/> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > ---------- Forwarded message ---------- > From: Gabriel Trainer <getrainer(a)bikefarm.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 5 Sep 2017 15:30:37 -0700 > Subject: Re: [TheThinkTank] Prices of New Cables and Housing? > At Bike Farm we charge the following for new cable/housing: > > Cables, brake or shifter $2 for non-member, $1.50 for members > > Cable Housing, brake or shift $1 per foot > > We save old housing and cables in a large plastic container in coils, > and we do not charge for them. Free for everyone to use. > > Gabriel > > On Tue, Sep 5, 2017 at 3:16 PM, Arlin Schaffel > <arlin(a)bridgecitybicyclecoop.com> wrote: > > We don't keep old housing / cables as we've had problems in the past with > > proper storage and also just generally being too rusted to use again. > > > > We have a suggested donations list and currently have cables at > $1.00/cable > > & housing at $0.50/ft. This is definitely undercutting shops but it > hasn't > > been an issue for us thus far. Possibly due to us serving different > clients > > than our local shops. > > > > Attached is our Suggested Price List. I believe we started with the > > Suggested Donation list from the Bike Dump in Winnipeg (thanks!) and > > modified from there. > > > > > > Arlin Schaffel > > Bridge City Bicycle Co-op > > http://bridgecitybicyclecoop.com > > facebook.com/bridgecitybicyclecoop/ > > twitter.com/the_bcbc > > > > On Tue, Sep 5, 2017 at 4:06 PM, Josh Bisker <jbisker(a)gmail.com> wrote: > >> > >> Hey, how do folks price their new cables and housing? And howzabout you > >> recycled cables and housing? Is this an area in which it's ok to > underprice > >> the retail markup of commercial shops, and if so what's the rationale > for > >> doing so per se? > >> > >> We have our FIRST EVER batch of new cables and there are a number of > ideas > >> about how to price them. Help us with your wisdom, fam. > >> > >> Josh Bisker > >> 914-500-9890 > >> New York Mechanical Gardens Bike Co-op > >> 596 Acres > >> Bindlestiff Family Cirkus > >> > >> ____________________________________ > >> > >> The ThinkTank mailing List > >> > >> Unsubscribe from this list here: > >> http://lists.bikecollectives.org/options.cgi/thethinktank- > bikecollectives.org > >> > >> > > > > > > ____________________________________ > > > > The ThinkTank mailing List > > > > Unsubscribe from this list here: > > http://lists.bikecollectives.org/options.cgi/thethinktank- > bikecollectives.org > > > > > > > > ---------- Forwarded message ---------- > From: Reno Bikes <renobikeproject(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Tue, 5 Sep 2017 15:55:39 -0700 > Subject: Re: [TheThinkTank] Prices of New Cables and Housing? > At Reno Bike Project we do pretty much just like Bike Farm, above. > $2/cable and $1/foot of housing. Used cables and housing are free/donations > accepted. > > On Tue, Sep 5, 2017 at 3:30 PM, Gabriel Trainer <getrainer(a)bikefarm.org> > wrote: > >> At Bike Farm we charge the following for new cable/housing: >> >> Cables, brake or shifter $2 for non-member, $1.50 for members >> >> Cable Housing, brake or shift $1 per foot >> >> We save old housing and cables in a large plastic container in coils, >> and we do not charge for them. Free for everyone to use. >> >> Gabriel >> >> On Tue, Sep 5, 2017 at 3:16 PM, Arlin Schaffel >> <arlin(a)bridgecitybicyclecoop.com> wrote: >> > We don't keep old housing / cables as we've had problems in the past >> with >> > proper storage and also just generally being too rusted to use again. >> > >> > We have a suggested donations list and currently have cables at >> $1.00/cable >> > & housing at $0.50/ft. This is definitely undercutting shops but it >> hasn't >> > been an issue for us thus far. Possibly due to us serving different >> clients >> > than our local shops. >> > >> > Attached is our Suggested Price List. I believe we started with the >> > Suggested Donation list from the Bike Dump in Winnipeg (thanks!) and >> > modified from there. >> > >> > >> > Arlin Schaffel >> > Bridge City Bicycle Co-op >> > http://bridgecitybicyclecoop.com >> > facebook.com/bridgecitybicyclecoop/ >> > twitter.com/the_bcbc >> > >> > On Tue, Sep 5, 2017 at 4:06 PM, Josh Bisker <jbisker(a)gmail.com> wrote: >> >> >> >> Hey, how do folks price their new cables and housing? And howzabout you >> >> recycled cables and housing? Is this an area in which it's ok to >> underprice >> >> the retail markup of commercial shops, and if so what's the rationale >> for >> >> doing so per se? >> >> >> >> We have our FIRST EVER batch of new cables and there are a number of >> ideas >> >> about how to price them. Help us with your wisdom, fam. >> >> >> >> Josh Bisker >> >> 914-500-9890 >> >> New York Mechanical Gardens Bike Co-op >> >> 596 Acres >> >> Bindlestiff Family Cirkus >> >> >> >> ____________________________________ >> >> >> >> The ThinkTank mailing List >> >> >> >> Unsubscribe from this list here: >> >> http://lists.bikecollectives.org/options.cgi/thethinktank-bi >> kecollectives.org >> >> >> >> >> > >> > >> > ____________________________________ >> > >> > The ThinkTank mailing List >> > >> > Unsubscribe from this list here: >> > http://lists.bikecollectives.org/options.cgi/thethinktank-bi >> kecollectives.org >> > >> > >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> > > > -- > > Monday-Wednesday, Saturday 10am-5pm > Thursday-Friday 10am-6pm > Sunday 11am-4pm > 541 E. 4th Street. > Reno, NV 89512 > 775-323-4488 <(775)%20323-4488> > > Donate via Paypal > <https://www.paypal.com/donate/?token=vuvKXYxQM2VBR5M9BfV-SidWS6o5AjC5cqYqR4…> > | Follow us on Facebook <https://www.facebook.com/renobikeproject> | > Instagram <https://www.instagram.com/renobikeproject/> | Twitter > <https://twitter.com/renobikeproject> > > Please let us know if you would like to unsubscribe to our email list. > > > ---------- Forwarded message ---------- > From: LaBikery <labikery(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 06 Sep 2017 16:04:05 +0000 > Subject: Re: [TheThinkTank] Prices of New Cables and Housing? > We also don't re-use old cables/housing (however sometimes people will > still grab it from our recycle bin). Typically we explain why it's better > to use new (as Arlin explained). If people can't afford the price we have a > Fund set aside that and we'll give them new cables/housing. > > Our prices are $1.50 per cable, and $1/ft for housing. > > We stick pretty hard to keeping our prices at a 50% markup from our > supplier so that it's a fair market price. (Our prices are set at cables we > bought quite a few years ago when we did a big order...we have to order > more so they'll likely go up a tad soon). > > Because we have a fund put aside for folks that can't afford parts it > means that people can pay-what-they-can or not at all. We don't advertise > that fund really but we let anyone know when they come in not to worry > about money as a barrier to repairs. > > Krysta > > On Tue, 5 Sep 2017 at 19:55 Reno Bikes <renobikeproject(a)gmail.com> wrote: > >> At Reno Bike Project we do pretty much just like Bike Farm, above. >> $2/cable and $1/foot of housing. Used cables and housing are free/donations >> accepted. >> >> On Tue, Sep 5, 2017 at 3:30 PM, Gabriel Trainer <getrainer(a)bikefarm.org> >> wrote: >> >>> At Bike Farm we charge the following for new cable/housing: >>> >>> Cables, brake or shifter $2 for non-member, $1.50 for members >>> >>> Cable Housing, brake or shift $1 per foot >>> >>> We save old housing and cables in a large plastic container in coils, >>> and we do not charge for them. Free for everyone to use. >>> >>> Gabriel >>> >>> On Tue, Sep 5, 2017 at 3:16 PM, Arlin Schaffel >>> <arlin(a)bridgecitybicyclecoop.com> wrote: >>> > We don't keep old housing / cables as we've had problems in the past >>> with >>> > proper storage and also just generally being too rusted to use again. >>> > >>> > We have a suggested donations list and currently have cables at >>> $1.00/cable >>> > & housing at $0.50/ft. This is definitely undercutting shops but it >>> hasn't >>> > been an issue for us thus far. Possibly due to us serving different >>> clients >>> > than our local shops. >>> > >>> > Attached is our Suggested Price List. I believe we started with the >>> > Suggested Donation list from the Bike Dump in Winnipeg (thanks!) and >>> > modified from there. >>> > >>> > >>> > Arlin Schaffel >>> > Bridge City Bicycle Co-op >>> > http://bridgecitybicyclecoop.com >>> > facebook.com/bridgecitybicyclecoop/ >>> > twitter.com/the_bcbc >>> > >>> > On Tue, Sep 5, 2017 at 4:06 PM, Josh Bisker <jbisker(a)gmail.com> wrote: >>> >> >>> >> Hey, how do folks price their new cables and housing? And howzabout >>> you >>> >> recycled cables and housing? Is this an area in which it's ok to >>> underprice >>> >> the retail markup of commercial shops, and if so what's the rationale >>> for >>> >> doing so per se? >>> >> >>> >> We have our FIRST EVER batch of new cables and there are a number of >>> ideas >>> >> about how to price them. Help us with your wisdom, fam. >>> >> >>> >> Josh Bisker >>> >> 914-500-9890 >>> >> New York Mechanical Gardens Bike Co-op >>> >> 596 Acres >>> >> Bindlestiff Family Cirkus >>> >> >>> >> ____________________________________ >>> >> >>> >> The ThinkTank mailing List >>> >> >>> >> Unsubscribe from this list here: >>> >> http://lists.bikecollectives.org/options.cgi/thethinktank- >>> bikecollectives.org >>> >> >>> >> >>> > >>> > >>> > ____________________________________ >>> > >>> > The ThinkTank mailing List >>> > >>> > Unsubscribe from this list here: >>> > http://lists.bikecollectives.org/options.cgi/thethinktank- >>> bikecollectives.org >>> > >>> > >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives. >>> org/options.cgi/thethinktank-bikecollectives.org >>> >>> >> >> >> -- >> >> Monday-Wednesday, Saturday 10am-5pm >> Thursday-Friday 10am-6pm >> Sunday 11am-4pm >> 541 E. 4th Street. >> Reno, NV 89512 >> 775-323-4488 <(775)%20323-4488> >> >> Donate via Paypal >> <https://www.paypal.com/donate/?token=vuvKXYxQM2VBR5M9BfV-SidWS6o5AjC5cqYqR4…> >> | Follow us on Facebook <https://www.facebook.com/renobikeproject> | >> Instagram <https://www.instagram.com/renobikeproject/> | Twitter >> <https://twitter.com/renobikeproject> >> >> Please let us know if you would like to unsubscribe to our email list. >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives. >> org/options.cgi/thethinktank-bikecollectives.org >> >> > > ---------- Forwarded message ---------- > From: Shannon Southwood <shannon(a)sacbikekitchen.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 6 Sep 2017 09:21:50 -0700 > Subject: Re: [TheThinkTank] Prices of New Cables and Housing? > At Sac Bike Kitchen, we also do $2/each for cables and $1/ft for housing > with used cables and housing being free. We used to not allow cables and > housing sales for projects outside the shop but recently changed this as > our contacts at the local bike shops made pretty clear what we do doesn't > effect them in any appreciable way. It probably helps that our hours are > limited and we are usually open when they are closed... > > -Shannon > > On Wed, Sep 6, 2017 at 9:04 AM, LaBikery <labikery(a)gmail.com> wrote: > >> We also don't re-use old cables/housing (however sometimes people will >> still grab it from our recycle bin). Typically we explain why it's better >> to use new (as Arlin explained). If people can't afford the price we have a >> Fund set aside that and we'll give them new cables/housing. >> >> Our prices are $1.50 per cable, and $1/ft for housing. >> >> We stick pretty hard to keeping our prices at a 50% markup from our >> supplier so that it's a fair market price. (Our prices are set at cables we >> bought quite a few years ago when we did a big order...we have to order >> more so they'll likely go up a tad soon). >> >> Because we have a fund put aside for folks that can't afford parts it >> means that people can pay-what-they-can or not at all. We don't advertise >> that fund really but we let anyone know when they come in not to worry >> about money as a barrier to repairs. >> >> Krysta >> >> >> On Tue, 5 Sep 2017 at 19:55 Reno Bikes <renobikeproject(a)gmail.com> wrote: >> >>> At Reno Bike Project we do pretty much just like Bike Farm, above. >>> $2/cable and $1/foot of housing. Used cables and housing are free/donations >>> accepted. >>> >>> On Tue, Sep 5, 2017 at 3:30 PM, Gabriel Trainer <getrainer(a)bikefarm.org> >>> wrote: >>> >>>> At Bike Farm we charge the following for new cable/housing: >>>> >>>> Cables, brake or shifter $2 for non-member, $1.50 for members >>>> >>>> Cable Housing, brake or shift $1 per foot >>>> >>>> We save old housing and cables in a large plastic container in coils, >>>> and we do not charge for them. Free for everyone to use. >>>> >>>> Gabriel >>>> >>>> On Tue, Sep 5, 2017 at 3:16 PM, Arlin Schaffel >>>> <arlin(a)bridgecitybicyclecoop.com> wrote: >>>> > We don't keep old housing / cables as we've had problems in the past >>>> with >>>> > proper storage and also just generally being too rusted to use again. >>>> > >>>> > We have a suggested donations list and currently have cables at >>>> $1.00/cable >>>> > & housing at $0.50/ft. This is definitely undercutting shops but it >>>> hasn't >>>> > been an issue for us thus far. Possibly due to us serving different >>>> clients >>>> > than our local shops. >>>> > >>>> > Attached is our Suggested Price List. I believe we started with the >>>> > Suggested Donation list from the Bike Dump in Winnipeg (thanks!) and >>>> > modified from there. >>>> > >>>> > >>>> > Arlin Schaffel >>>> > Bridge City Bicycle Co-op >>>> > http://bridgecitybicyclecoop.com >>>> > facebook.com/bridgecitybicyclecoop/ >>>> > twitter.com/the_bcbc >>>> > >>>> > On Tue, Sep 5, 2017 at 4:06 PM, Josh Bisker <jbisker(a)gmail.com> >>>> wrote: >>>> >> >>>> >> Hey, how do folks price their new cables and housing? And howzabout >>>> you >>>> >> recycled cables and housing? Is this an area in which it's ok to >>>> underprice >>>> >> the retail markup of commercial shops, and if so what's the >>>> rationale for >>>> >> doing so per se? >>>> >> >>>> >> We have our FIRST EVER batch of new cables and there are a number of >>>> ideas >>>> >> about how to price them. Help us with your wisdom, fam. >>>> >> >>>> >> Josh Bisker >>>> >> 914-500-9890 >>>> >> New York Mechanical Gardens Bike Co-op >>>> >> 596 Acres >>>> >> Bindlestiff Family Cirkus >>>> >> >>>> >> ____________________________________ >>>> >> >>>> >> The ThinkTank mailing List >>>> >> >>>> >> Unsubscribe from this list here: >>>> >> http://lists.bikecollectives.org/options.cgi/thethinktank-bi >>>> kecollectives.org >>>> >> >>>> >> >>>> > >>>> > >>>> > ____________________________________ >>>> > >>>> > The ThinkTank mailing List >>>> > >>>> > Unsubscribe from this list here: >>>> > http://lists.bikecollectives.org/options.cgi/thethinktank-bi >>>> kecollectives.org >>>> > >>>> > >>>> ____________________________________ >>>> >>>> The ThinkTank mailing List >>>> >>>> Unsubscribe from this list here: http://lists.bikecollectives.o >>>> rg/options.cgi/thethinktank-bikecollectives.org >>>> >>>> >>> >>> >>> -- >>> >>> Monday-Wednesday, Saturday 10am-5pm >>> Thursday-Friday 10am-6pm >>> Sunday 11am-4pm >>> 541 E. 4th Street. >>> Reno, NV 89512 >>> 775-323-4488 <(775)%20323-4488> >>> >>> Donate via Paypal >>> <https://www.paypal.com/donate/?token=vuvKXYxQM2VBR5M9BfV-SidWS6o5AjC5cqYqR4…> >>> | Follow us on Facebook <https://www.facebook.com/renobikeproject> | >>> Instagram <https://www.instagram.com/renobikeproject/> | Twitter >>> <https://twitter.com/renobikeproject> >>> >>> Please let us know if you would like to unsubscribe to our email list. >>> ____________________________________ >>> >>> The ThinkTank mailing List >>> >>> Unsubscribe from this list here: http://lists.bikecollectives.o >>> rg/options.cgi/thethinktank-bikecollectives.org >>> >>> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > ---------- Forwarded message ---------- > From: Michael Young <michael(a)westtownbikes.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 6 Sep 2017 11:45:59 -0500 > Subject: Re: [TheThinkTank] Prices of New Cables and Housing? > <SNIP> > > Used cables are fine to re-use as long as they are in good condition. > Cables from the rear can often move to the front and live a longer life. > > <SNIP> > > > ---------- Forwarded message ---------- > From: Ainsley Naylor <needleandthread(a)gmail.com> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 6 Sep 2017 12:47:47 -0400 > Subject: Re: [TheThinkTank] Prices of New Cables and Housing? > @ Bike Pirates we have always sold cable assemblies (cable, housing, > ferrules/caps) as a unit, rather than having to figure our how much housing > each participant has used. Our price has been $5 for as long as I can > remember and applies to both brake and shift lines. > > Ainsley. > > On Wed, Sep 6, 2017 at 12:45 PM, Michael Young <michael(a)westtownbikes.org> > wrote: > >> <SNIP> >> >> Used cables are fine to re-use as long as they are in good condition. >> Cables from the rear can often move to the front and live a longer life. >> >> <SNIP> >> >> ____________________________________ >> >> The ThinkTank mailing List >> >> Unsubscribe from this list here: http://lists.bikecollectives.o >> rg/options.cgi/thethinktank-bikecollectives.org >> >> >> > > > ---------- Forwarded message ---------- > From: Sue Prant <sue(a)communitycycles.org> > To: The Think Tank <thethinktank(a)lists.bikecollectives.org> > Cc: > Bcc: > Date: Wed, 6 Sep 2017 12:25:26 -0600 > Subject: [TheThinkTank] Hiring an Education Coordinator at Community > Cycles, Boulder CO > > Education Coordinator Job Description > > Purpose: > > The Education Coordinator manages the Earn a Bike (EAB) program, > coordinates the Complete Mechanic Series (CMS), and conducts occasional > other workshops at and on behalf of Community Cycles. Reports to: Community > Cycles Sales and Service Manager > > Education/ Experience/ Specific Knowledge:1 + years bike mechanic > experience. 1+ years teaching experience. Excellent communication skills. > Excellent organization skills. Hours per week: 15-20 > > Responsibilities: EAB > > - > > Facilitate EAB program participants’ progress through the program by > resolving problems, responding to questions, answering all inquiries and > getting participants their bikes > - > > Coordinates with employees and volunteers working on web site and > Salesforce to make sure class times and descriptions are accurate. > - > > Enters participants into Salesforce when necessary > - > > Track TANF and other paperwork associated with EABers. > - > > Opens up EAB waiting list (when there is one) and notifies people on > list > - > > Continually review the EAB process to ensure it functions smoothly and > cost effectively while remaining relevant, engaging and worthwhile to > participants. > - > > Keep Community Cycles members, volunteers and staff informed about EAB > through the newsletter and staff meetings > - > > Distribute surveys and review participant feedback for improvements to > the process, workshop curriculums, materials and props. > - > > Keep the EAB and CMS program consistent with the Community Cycles > community service goals. > - > > Maintain order in the weekly teaching props bins > - > > Maintain a sufficient supply of new helmets for EAB graduates. > Coordinate delivery with Boulder Community Hospital. > - > > Continually review EAB reports in Salesforce to maintain accuracy. > > Responsibilities: CMS > > - > > Coordination of the CMS Series and Park Tool School > - > > Coordinate scheduling for class series and instructors > - > > Insure that all CMS props are ready at the beginning of each series > > Other Responsibilities > > - > > Coordinate dates for workshops and CMS with the Instructor Corps to > insure adequate coverage. > - > > Coordinate the delivery of Adult Maintenance 101 and Fix-a-Flat > workshops for UCAR, BVSD and Boulder County. > - > > Maintain the Education Station and insure handout bins are adequately > supplied. Insure handouts are current and relevant > - > > Attend monthly staff meetings and others as required. > - > > Provide the Community Cycles Manager, Executive Director and > Membership Director with monthly performance reports. > > Compensation/ Benefits: > > Hourly rate starting at $13 - $15 with a raise after 6 months. PTO after 6 > months. IRA match after 2 years. Flexible work environment and time-off. > > Send cover letter and resume to : manager(a)communitycycles.org. > > Subject line: Education Coordinator opening > > > > > -- > Sue Prant > Executive Director > Community Cycles > 2805 Wilderness Pl Suite 1000 > Boulder, CO 80301 > Phone: 303-564-9681 > e-mail: sue(a)communitycycles.org > www.CommunityCycles.org <http://www.communitycycles.org/> > > > Join the movement! > Become a Community Cycles member <http://communitycycles.org/member/> > > Subscribe to our monthly e-news! <http://communitycycles.org/> > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank- > bikecollectives.org > > -- -- B!KE: The Peterborough Community Bike Shop 293 George Street North, Peterborough ON (705) 775-7227 communitybikeshop.org

1 0

Hiring an Education Coordinator at Community Cycles, Boulder CO
by Sue Prant 06 Sep '17

06 Sep '17

Education Coordinator Job Description Purpose: The Education Coordinator manages the Earn a Bike (EAB) program, coordinates the Complete Mechanic Series (CMS), and conducts occasional other workshops at and on behalf of Community Cycles. Reports to: Community Cycles Sales and Service Manager Education/ Experience/ Specific Knowledge:1 + years bike mechanic experience. 1+ years teaching experience. Excellent communication skills. Excellent organization skills. Hours per week: 15-20 Responsibilities: EAB - Facilitate EAB program participants’ progress through the program by resolving problems, responding to questions, answering all inquiries and getting participants their bikes - Coordinates with employees and volunteers working on web site and Salesforce to make sure class times and descriptions are accurate. - Enters participants into Salesforce when necessary - Track TANF and other paperwork associated with EABers. - Opens up EAB waiting list (when there is one) and notifies people on list - Continually review the EAB process to ensure it functions smoothly and cost effectively while remaining relevant, engaging and worthwhile to participants. - Keep Community Cycles members, volunteers and staff informed about EAB through the newsletter and staff meetings - Distribute surveys and review participant feedback for improvements to the process, workshop curriculums, materials and props. - Keep the EAB and CMS program consistent with the Community Cycles community service goals. - Maintain order in the weekly teaching props bins - Maintain a sufficient supply of new helmets for EAB graduates. Coordinate delivery with Boulder Community Hospital. - Continually review EAB reports in Salesforce to maintain accuracy. Responsibilities: CMS - Coordination of the CMS Series and Park Tool School - Coordinate scheduling for class series and instructors - Insure that all CMS props are ready at the beginning of each series Other Responsibilities - Coordinate dates for workshops and CMS with the Instructor Corps to insure adequate coverage. - Coordinate the delivery of Adult Maintenance 101 and Fix-a-Flat workshops for UCAR, BVSD and Boulder County. - Maintain the Education Station and insure handout bins are adequately supplied. Insure handouts are current and relevant - Attend monthly staff meetings and others as required. - Provide the Community Cycles Manager, Executive Director and Membership Director with monthly performance reports. Compensation/ Benefits: Hourly rate starting at $13 - $15 with a raise after 6 months. PTO after 6 months. IRA match after 2 years. Flexible work environment and time-off. Send cover letter and resume to : manager(a)communitycycles.org. Subject line: Education Coordinator opening -- Sue Prant Executive Director Community Cycles 2805 Wilderness Pl Suite 1000 Boulder, CO 80301 Phone: 303-564-9681 e-mail: sue(a)communitycycles.org www.CommunityCycles.org <http://www.communitycycles.org/> Join the movement! Become a Community Cycles member <http://communitycycles.org/member/> Subscribe to our monthly e-news! <http://communitycycles.org/>

1 0

HIRING Hub Bike Coop (mpls), HR, Marketing, Service Coord, Development,
by Eamon O'Hara 01 Sep '17

01 Sep '17

Hey y'all! We here at the Worker-Owned Hub Bike Coop (mpls) <http://www.thehubbikecoop.org/> are hiring for a couple of year-round bike shop positions (job descriptions attached): -Personnel Coordinator (Human Resources) -Development Coord (sorta E.D.) -Marketing Coordinator -Service Dept Coordinator We are a worker owned and operated bike shop with 3 locations in Minneapolis, MN. *Worker Owned. Democratically Run * No outside board of directors or investors make decisions that effect the lives of employees. We are an egalitarian workplace with no closed door meetings (except as required by labor laws). All workers have opportunities to vote on different aspects of the business, and have equal access to information *Supportive Space For All* We provide supportive space that is welcoming and respectful to workers of all genders and cultures. We consistently engage is antioppression trainings that work to dismantle our biases for the benefit of each other & customers. We host one of several Grease Rag <http://www.greaserag.org> Open Shop nights at our Oak Street location. interested folks can send resumes over to apply(a)thehubbikecoop.biz thanks! eamon O -- pronouns: he/him

1 0

Volunteer Rights/Responsibiities
by Todd Spinner 29 Aug '17

29 Aug '17

Does anyone out there in Bicycle Co-op land have any good documents you can share on volunteer rights or Volunteer bill of rights? I remember seeing one floating around a few years ago but cannot seem to find it in my files. Thanks, Todd -- Todd Spinner The Bike Project of Urbana-Champaign

2 1

Final Call for Interbike Passes!!
by Tiff Mueller 29 Aug '17

29 Aug '17

Greetings!! I wanted to send one last reminder for Interbike sign ups this year. Again, its a highly valuable experience that brings you face to face with our industry. Passes are free for non-profits and I would really like to help get as many cool folks out there as I can. Just let me know if there are any questions or concerns, but here is the sign up again: https://docs.google.com/spreadsheets/d/1Ryv4e0wSR21-9LXoMRrLxjHbG6eafAzTmg4… THE DEADLINE IS SEPTEMBER 6th!!! NEXT WEDNESDAY! Hope the summer treated you all well and you're geared up for a great Fall!! Thanks again, -Tiff Mueller Bike Rescue

2 3

Re: [TheThinkTank] UNSUBSCRIBE
by Andy Caine 29 Aug '17

29 Aug '17

????? From: Joey Wilkinson Sent: Tuesday, August 29, 2017 11:54 AM To: The Think Tank Subject: [TheThinkTank] UNSUBSCRIBE UNSUBSCRIBE -------------------------------------------------------------------------------- ____________________________________ The ThinkTank mailing List Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.o…

3 2

UNSUBSCRIBE
by Joey Wilkinson 29 Aug '17

29 Aug '17

UNSUBSCRIBE

1 0

Volunteer Management Software - help guide and summary
by A Westphal 21 Aug '17

21 Aug '17

Hello everyone, Earlier in the summer, I inquired in this list about volunteer management systems. Since then, I researched your suggestions, as well as programs suggested by a previous post in the ThinkTank archives, and general best-of lists online. Below, you may see my notes about some of the top systems for my organization’s needs. Please remember that because these programs will continue to evolve, these recommendations should be reevaluated if you are revisiting this post in the archives. STEP 1: evaluate your organization Before we dive into the systems themselves, it’s important to think about what your organization really needs, and perhaps more importantly, if your organization has enough volunteer power to start up a system AND keep it running smoothly. You may have enough knowledge for the setup, but unless you have buy-in from your coordinators and your volunteers, the system probably won’t work the way you intended. STEP 2: evaluate your goals Do you want to track exact hours worked, or just count number of events worked by your volunteers? Do you want on-site sign-ins and sign-outs, or will your coordinator check back later to credit the volunteers for their participation? Do you need to track special info, such as ZIP codes, training course completion, etc etc, which might not be included in a software’s standard sign-up profile? Do you want to host the data on a single computer, or keep everything on the cloud? How many coordinator logins do you need? How many volunteer do you want to manage in the system? What decisions does your organization need to make, and how will better data and/or reporting be able to improve the quality of those decisions? STEP 3: review the top programs My list from June/July 2017 can be found below. STEP 4: do product demos Contact the sales reps from several companies, and spend 30-60min speaking to them about the product. Make sure to ask about all the qualifications you identified in Step #2; you could ask if you can send in your list of needs in advance, so they have more time to review what you’re looking for. Don’t be shy about asking very specific and lots of questions. STEP 5: make your selection No single system will do everything you want perfectly -- particularly if you have a limited (or no) budget. Create a scoring sheet to weigh your options, including around items like cost (don’t assume that you’ll stay at the free or cheap option for long), various features, and potential for scalability. STEP 6: pilot one solution Once you’ve decided on your best option, test it out for at least a month. (Most companies offer a free month of their premium product.) To keep things manageable, and avoid major disruption, test the new product with just your core volunteers (who will be willing to deal with some bumps, and give you honest feedback), or just a couple of events. STEP 7: embrace and evaluate After you’ve confirmed the program which will work best for you, move as much data and processes as possible over to the new system. This will take at least twice as long as you expect. As mentioned above, entering and maintaining data requires consistent effort and buy-in across your organization. My list of top programs (the list order is not an exact ranking) 1. Get Connected *aka* Community Connect by Galaxy Digital 1. This program is a very strong contender in this space, and seems to have a highly capable set of analytic tools. 2. We did a phone call with a sales rep, and used a sandbox site. We were interested, but the product does not fit our miniscule budget at this time (they charge $1,000/year for organizations with an operating budget of less than $50,000). 3. https://www.galaxydigital.com/volunteer-management/ 2. Timecounts 1. TimeCounts is comparable to Get Connected (above), but does not seem to include the same analytic tools. 2. We tested the free version for a few weeks and decided to pursue this option further. 3. https://timecounts.org/ 3. Volgistics Volunteer Management 1. The program seems simple, but may be powerful if you can invest time into it. Be careful to note if you’ll need any of their add-ons. 2. We tested their free trial and decided not to pursue it further. 3. https://www.volgistics.com/volunteer-management.htm 4. VolunteerHub 1. This is a highly capable program, but we did not pursue the product further than their informational video, due to lack of fit with our organization. 2. http://www.volunteerhub.com/ 5. Sumac 1. This program is more of a Customer Relationship Management (CRM) tool than a volunteer management system. For that reason, we decided not to pursue it after doing a phone call with a sales rep. 2. http://sumac.com/ 6. SalesForce 1. This software is one of the market leaders for all CRM tools (nonprofit and normal business operations). We did not consider using it because it is far too intense for our small-scale needs, but it may be a good fit for your organization, particularly if you have paid staff. There are also good pricing options available to nonprofits: 10 free licenses, plus ample community support. 2. BikeWalkWitcheta uses this system -- thanks for your feedback. 3. https://www.salesforce.com/ 7. CiviCRM 1. This program requires a fair bit of technical know-how for the setup, but it is also free and open-source, so you could mould it to your organization. 2. I’ve heard that Bikes Not Bombs in Boston uses this system. 3. https://civicrm.org/ 8. PowerBase 1. If you like CiviCRM, but you don’t have the know-how to set it up, try PowerBase! Their product is based on CiviCRM. 2. https://www.progressivetech.org/powerbase/ 9. FreeHub 1. A database of members and the services to which they have access, a sign-in system for use at the front desk of the shop, and a reporting tool for looking at shop use, membership status, etc. 2. This tool was developed by the bike collective community. Information on this and other programs can be located on the bike collectives wiki. 3. http://freehub.bikekitchen.org/ 10. SignUp.com 1. We tested this system, and it is fine as a free program, but we wanted more rigorous analytical capabilities which are only included in the expensive premium package. 2. Thanks to LocalMotion in Burlington, Vermont, for the suggestion. 11. eCoordinator by Samaritan Technologies 1. We did not investigate the specifics features offered with this program because the price point was far too high for us. 2. https://samaritan.com/ 12. Volunteer Impact by Better Impact 1. http://www.betterimpact.com/volunteer-software/ 13. VolunteerLocal 1. www.volunteerlocal.com 14. VolunteerMark 1. https://www.volunteermark.com/ Please note that this list focuses mainly on volunteer management systems. You may also consider looking in other categories to more closely align with your needs, including advocacy/action, fundraising, contact management (CRM), etc. Also note that different systems exist for point-of-sale consoles and inventory processing, so you may also consider investigating those programs if you have a large shop with lots of sales. Thank you for being such a great group. I hope this information is useful to you. Best wishes from Ann Arbor, MI Andrew Westphal Common Cycle board member commoncycle.org

1 0

Fwd: Roll out what you learned in training to your team!
by Angel York 21 Aug '17

21 Aug '17

I recently went to a workshop on non-profit management, "managing to change the world". If anyone is interested, I can set this email series to auto-forward to your email address for the next few months. ---------- Forwarded message ---------- From: The Management Center <admin(a)managementcenter.org> Date: Mon, Aug 21, 2017 at 6:05 AM Subject: Roll out what you learned in training to your team! To: aniola(a)gmail.com Email not displaying correctly? View it in your browser. <http://us1.campaign-archive2.com/?u=d14f6e75581b6d76530f3d084&id=264a780730…> Dear Friend, Now that you’re back at work after our Managing to Change The World training course, you might be wondering how you’re ever going to translate everything you learned to your team. We want to make that easy for you, so we’ve put together an email (it's below!) that you can tweak and send out to your team to explain the most important concepts from the course, and let them know how they can help you implement some new practices – like MOCHA, goals, check-ins, and debriefing meetings. The best part is you just have to send the email, and your staff will do all the rest! Well, some of it. (Don’t forget to customize the areas below that we’ve marked in all caps!) Also, for the next 12 weeks, we’re going to send you additional prompts and concrete “next steps.” (However, if you don’t want to receive these 12 emails, you can opt out here <http://managementcenter.us1.list-manage.com/track/click?u=d14f6e75581b6d765…> .) SUBJECT: Big changes afoot… Dear Team: Yesterday I attended the “Managing to Change the World” training, and I came out with a lot of great new tools and ideas, but I’ll need your help to implement everything. This email outlines some of the new approaches I’d like to implement, and explains what that means for you, in terms of new ways to approach, manage, and evaluate your work. I want to give you each big goals, and let each of you have ownership on how you’ll achieve those goals. At the end, there’s a list of ACTION ITEMS for everyone. I know this is a lot of information, but I promise that these tools will help you manage your own work better, and will help you get what you need from me (and others) to get things done. *CHECK-INS* I’d like you each to schedule a one-hour meeting with me (to occur before DATE). Please send me an agenda for this the day before our meeting so I have time to reflect on it as well. Here’s a sample agenda <http://managementcenter.us1.list-manage.com/track/click?u=d14f6e75581b6d765…> to use as a template. We’ll have these check-ins weekly (please be in charge of ensuring that that happens!). This week, we’ll review the other action items listed in this email, as well as cover the other topics listed in the template. *MOCHA* MOCHA may sound like a delicious but pointless acronym, but it’s a way for everyone to be totally clear on his or her role within projects. The idea is that when there are a bunch of people involved in a project but a lack of clear roles, things can languish. But when roles are really clear, it’s easier to determine who’s responsible for driving things forward, what the next steps should be, who you need to get approvals from, and who you can turn to for help. And it’s super quick: *M: Manager*. This is the person managing the project. She guides the work and assigns responsibility. (This will often be me, but not always.) *O: Owner.* This is the person who truly owns the project, and is responsible for its success. *C: Consulted*. These are people who should be asked for input or need to be bought into the project. *H: Helper.* Helpers can help you out with some of the work. They may even be mini-owners of a small segment of the project. *A: Approver.* Approvers need to sign off on the work (or decisions about the work) before it’s final. So, as an example: [INSERT THE MOCHA YOU CREATED DURING TRAINING, AND EXPLAIN IT A BIT.] To help us get used to using this terminology, would you write a (very short) MOCHA describing a project that you are currently the owner of, including the roles you and others play in this project? We’ll discuss this MOCHA during our first check-in meeting and use it as a way to get us all familiar with this framework so that we can use it going forward. *REPEAT-BACKS* Possibly the weirdest thing I’ll ask you all to do (often) is called the Repeat-Back. It’s exactly what it sounds like it is: after we discuss what success looks like for a project, and we’ve agreed on the next steps, I’ll ask you to just repeat everything back to me to make sure we’re on the same page. This may be awkward at first, but I promise that if we try it for a few weeks, it will help us spot areas where I haven’t been clear or we’re on different pages or we just need to clarify something. (Feel free to ask me for a repeat-back too! If you need something from me to advance your work, this will help us make sure we’re on the same page about what I’m getting it you and when.) *THE DEBRIEF* When a big project or event is finally done, I know as well as anyone that it’s tempting to immediately move on to the next one and leave the past in a metaphorical dust cloud. But I’d love us to do a better job of talking about recently completed work and reflect on what went well, what could have gone better, and what lessons we can take away for the future. So, please schedule a 15-minute meeting with me to debrief on a recently completed project – or add it in the agenda for our next check-in. I’m really excited about having more structured reflection on how our work is going – and especially on things that have gone really well that I might not know about from the outside. *GOALS* I’d like to us to have more clarity around our goals for this year, individually and as a team – in order to get aligned about where we will (and won’t) put our energy and what concrete markers we’ll use to measure success. Specifically, I’d like us to all to create *SMART goals *that we’ll use to drive our work*. *Here’s a quick rundown of what “SMART” stands for: *S: Strategic*. Does the goal reflect an important dimension of what we seek to accomplish? *M: Measurable*. How will you know when you’ve accomplished the goal? This doesn’t need to be a bunch of numbers, but should be a standard by which reasonable people can agree on whether the goals has been met. *A: Ambitious*. Is the goal challenging enough that achieving it would mean significant progress? *R: Realistic*. Is this something we really can do? Do we have a plan to achieve it and know what it will take in terms of resources and time? *T: Time-Bound.* Is there a clear deadline? OPTIONAL ADDITION: For instance, one goal I wrote for myself during the training is [INSERT EXAMPLE GOAL]. To get the ball rolling on this, I’d like you to select one of your goals for this year and evaluate it using the SMART model. Does the goal, as you understand it, meet all of those specifications? If not, can you reframe it so it does (and, in doing so, do you feel like it’s a stronger goal)? By [DATE], please send me your musings on the goal you’ve examined or raise it with me one-on-one. This need not be formal; something in the body of an email is fine. If you get stuck … well, then, raise that with me that too! *ACTION ITEMS FOR EVERYONE* To sum up, here’s what I’d like you to do: 1. Schedule a check-in meeting with me by DATE and send me an agenda for check-in the day before the meeting. 2. Use MOCHA to assign roles to a project YOU own (we’ll review at the check-in meeting). 3. Schedule a debriefing meeting for a current project or include it on your agenda for our next check-in. 4. SMART-ify at least one goal and email to me by DATE. Thank you in advance for spending some time on these new ideas with me, and absolutely feel free to ask me any questions you have about any of this! [SIGNED] Best, The Management Center You are receiving this email because you signed up for our newsletter list through our website (www.managementcenter.org), a Management Center training, or a book order. <http://managementcenter.us1.list-manage.com/unsubscribe?u=d14f6e75581b6d765…> Forward <http://us1.forward-to-friend.com/forward?u=d14f6e75581b6d76530f3d084&id=264…> this email to a friend | Update your profile <http://managementcenter.us1.list-manage1.com/profile?u=d14f6e75581b6d76530f…> Unsubscribe <http://managementcenter.us1.list-manage.com/unsubscribe?u=d14f6e75581b6d765…> aniola(a)gmail.com from this list. Our mailing address is: The Management Center 1710 Rhode Island Ave. NW Suite 1100 Washington, DC 20036 Add us to your address book <http://managementcenter.us1.list-manage.com/vcard?u=d14f6e75581b6d76530f3d0…> Copyright (C) 2017 The Management Center All rights reserved.

1 0

Bike!Bike! workshop on local coalition building
by Aida Mas Baghaie 16 Aug '17

16 Aug '17

Hello Think Tank! On behalf of the AMS Bike Co-op / Bike Kitchen in Vancouver I’m wondering if anyone planning on attending Bike!Bike! this year has interest in co-facilitating a workshop on coalition building. This workshop may be of interest to folks from cities or regions with multiple community bike shops looking to form coalitions (or already have) to help manage resources between shops. We will be showing off our shiny new Vancouver Community Bike Shop Network and brainstorming ways to create similar groups where needed and appropriate, and troubleshooting some of the finer details. Please e-mail me if you are interested in co-facilitating and if it’s a good fit we can make this workshop even more sweet! Looking forward to seeing y'all at Bike!Bike! <3 aida

2 1

Bike station tool kits
by Luis Fernandez 14 Aug '17

14 Aug '17

Hi all, Been lurking the list for a while - stoked that I have a reason to post. It's a great list, and I appreciate all I've learned from it in lurking silence so far... I'm a member of the Somerville Bike Kitchen in (currently) sunny Massachusetts (www.somervillebikekitchen.org). We have a full set of bike tools for most possible repairs and all of them, including basic tools are hanging on a peg board for people to grab as needed. We are considering building up tool kits that have basic tools that can be attached to a particular stand or handed off to someone working on their bike outside that will cover most of the basic tasks. If someone needs a more obscure/expensive tool, or a tool that might require more guidance to use (cone wrenches, freewheel tools, chainwhips, etc) they can still come grab it as needed I have 2 basic questions: 1) What is the set of tools that you would hand someone to get started on a basic repair of their bike. (Keeping in mind that more specialized tools are readily available a few steps away.)? Basically, which are the tools we should have kitted to avoid lots of foot traffic and reduce wasted time as people walk back into the shop for a basic tool that someone else may be using at the time. here's the kind of kit I'm thinking of... a set of allen L keys in their own plastic holder a 3 way triangular park allen bike tool for basic things a set of box wrenches (perfect in a tool roll, so it's clear that there is a wrench missing if a slot is empty.) 2 tire levers 4 screw drivers, small flat head, large flathead, small phillips, large phillips pedal wrench? 2) what's the best way to keep this set of tools organized so that it's easy for someone to know that they've put the set back as they found it and not left something out accidentally. I'm thinking something like a well labelled tool roll. https://www.amazon.com/Rolling-Organizer-Carrier- Storage-Pockets/dp/B071HBHXFR/ref=sr_1_6?ie=UTF8&qid= 1502398802&sr=8-6&keywords=tool+roll How do you all handle this sort of thing? thanks, Luis ps - also, who here has cool stickers? Anyone interested in a bike coop sticker share?

3 2

Advice on laying out new premises.
by Geoffrey Smart 14 Aug '17

14 Aug '17

We are moving our workshop from 2 single garages in a city council owned compound to a larger tin shed on the other side of the yard. Size is around 12 metres(40') x 8 metres (26.5') with a 3 metre (10') sliding door two thirds of the way along the longer wall leading out on to an asphalt compound. We have ideas on how we would like to set it up for the maximum amount of usable workspace and storage but it would be great to have any pictures and plans of how other workshops have set up their operations, specifically those of a similar size. We also welcome ideas on what works well and what mistakes others have made paritcularly in regard to storage and work stations. To give you an idea of our activities which are relevant to the layout. We recycle bikes with volunteers who are all adults, sell some and donate others. We also run 6 week maintenance classes. We occasionally have school excursions attend. Except for cheap rent from council we are totally self supporting from bike sales and classes. Please post your ideas. If you have plans and photos you would like to share please email us at :- back2bikes.portmelbourne(a)gmail.com Geoff Smart Back2Bikes

5 5

Re: [TheThinkTank] Thethinktank Digest, Vol 131, Issue 1
by Lawrence Mohammed 11 Aug '17

11 Aug '17

Good idea Luis! I'd add another tyre lever to make this three per set I'd 'shadow board' the tool roll (white permanent marker pen outline around each tool - easy to see if anything is missing or misplaced) Regarding 'How do you all handle this sort of thing?' - do you mean physically? how about a strap sewn onto reinforced edges of each tool roll (making a carry handle) -- Warmest regards, *Lawrence Mohammed* Director/Head Mechanic *+44 (0)77 222 58587* *probikeservice.co.uk <https://probikeservice.co.uk>* *facebook.com/probikeservice <https://www.facebook.com/professionalbikeservice>* /[Location, NOT delivery address] Pro Bike Service C.I.C. Mobile Garden City Olympic Village London E20 1GW/ On 11/08/17 21:10, thethinktank-request(a)lists.bikecollectives.org wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > > Today's Topics: > > 1. Bike station tool kits (Luis Fernandez) > 2. Re: Advice on laying out new premises. (Angel York) > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… / /

1 0

Youth Bike Summit - Register Today <3
by Pasqualina Azzarello 30 Jul '17

30 Jul '17

Hi All, The early bird rates for the Youth Bike Summit will be coming to a close this *Tuesday August 1* - we encourage you to register today! Early bird rates are $25/youth (10-24) and $50/adult (25+) and include the three-day conference and most meals. See more info below: *When:* October 6-8, 2017 *Where: *Arlington, VA // Washington, DC *Hosted by:* Phoenix Bikes *Event Schedule:* https://youthbikesummit.org/2017-event-schedule/ *Registration & Accommodations:* https://youthbikesummit.org/registrationlodging/ Let us know if you have any questions - see you at the Youth Bike Summit! Best, Pasqualina -- *Pasqualina Azzarello* Director, Youth Bike Summit Website <https://youthbikesummit.org/> | Facebook <https://www.facebook.com/youthbikesummit/?fref=ts> | Twitter <https://twitter.com/youthbikesummit> | Instagram <https://www.instagram.com/youthbikesummit/> @youthbikesummit #YBS17 *SAVE THE DATE! * *Youth Bike Summit* Hosted by Phoenix Bikes in Arlington, VA October 6 - 8, 2017 // Arlington, VA / Washington, DC

1 0

Ride needed to BikeBike and back from Chicago
by waymond smith 29 Jul '17

29 Jul '17

Hello everyone, I have a friend who wants to attend BikeBike in Winnipeg in August. My friend is very active in community biking and has been "under the weather" for quite a while and is experiencing some difficulty in financially. I'm looking for someone who will be driving from Chicago to Winnipeg and is willing to take my friend, this person is very affable and outgoing. I will pick up the expenses in order for this person to attend. I will be attending, however I will be taking Amtrak to Fargo,ND and continuing the ride via bike. If any bike organizations or individuals are able to assist in this, please contact me privately. Thank you May Peace Go With You Waymond Smith waymondhsmith(a)gmail.com 773-972-4562

1 0

Photos of Bike Shop spaces for BikeBike
by Ian Wassink 29 Jul '17

29 Jul '17

Hello, Hola, Bonjour! I intend to lead a workshop at Bike! Bike! on space layout/organization. Please help by sending me photos of your bike shop: 1) A photo of the tools/work bench/repair stand area, 2) A photo of the used parts area, 3) A photo of the bulletin board, chalk board, or white board area, 4) Any other photos. Photos can be Emailed to: ianwassink(a)gmail.com and can be of any quality even from a cell phone. Ian Wassink

1 0

be br
by Daniel Silverman 28 Jul '17

28 Jul '17

zzuxb

1 0

Re: [TheThinkTank] Advice on laying out new premises
by Geoffrey Smart 28 Jul '17

28 Jul '17

Hi All, I would like to thank all the people so far who have replied with suggestions on new premises. We have taken ideas from everyone who has replied both here and directly to myself. When we finish moving which may take a while I will post pictures and a link and I am sure everyone will see some idea that they have contributed. Geoff Smart Back2Bikes Port Melbourne Australia

1 0

Re: [TheThinkTank] Thethinktank Digest, Vol 130, Issue 16
by Lawrence Mohammed 27 Jul '17

27 Jul '17

Hi Geoff I've just setup new premises in a self-converted 30ft x 10ft shipping container in the Olympic Park, London, UK. I visited Condor Cycles, Cloud 9 Cycles, Soho Cycles and a few others that are deemed the best of the best in London to ask if I could photo their workshops and get advice. All were very helpful and because my business runs on a gift economy and open source, all were happy for me to photo their workshops and talk me through what worked and why. What I found: * vertical storage (if safe and you have height) good * keeping only what is needed most to hand, the rest further away (minimal movement wasted) * dedicated bench/toolboard for facing/setting tools with a grinding wheel (if possible) and heavy bench vice * lots of space needed to store completed bikes/bikes awaiting service? Make a scaffolding rail & use meathooks - slide the bikes like clothes on a clothing rail! * double-sided stands are brilliant for frame swapouts and saving space (if you have the width) * paint benches and tool/shadowboards black - easy to find tools, looks good, stays looking good even when dirty * PVC piping with angle bend is a great way of storing cable inners! What I also did * long shipping containers are dark - I installed a 2.5kW solar system on the roof for internal LED spots and striplights - make sure benches are well lit and lit in a way as to avoid glare * I didn't have budget for proper storage and benches so bought cheap 2nd hand stackable plastic storage bin boxes and built benches from plywood to exactly fit these (with 1/2" gap around each) * Benches with tops deeper than the bench width means you can get your feet right up to the bench * Used a few interior design tricks to make the space appear bigger - racks/storage mounted off the floor - white wherever possible (especially ceiling)....would have uplighters too if more power (our projects runs off-grid) Other thoughts * sliding doors? use this space for your safety posters and legal stuff (we need HSE posters, fire safety and company documentation displayed in UK) - or more storage if sliding mechanism can cope * ensure there is adequate space to move around - a good rule of thumb is 60cm-70cm gap * have a mix of new and parts used by volunteers/staff? colour code storage bins/boxes - one for old, one for new * easy clean/non-slip flooring is a worthy investment * parts washer great if you have chance to get one Warmest regards, *Lawrence Mohammed* Director/Head Mechanic *+44 (0)77 222 58587* *probikeservice.co.uk <https://probikeservice.co.uk>* *facebook.com/probikeservice <https://www.facebook.com/professionalbikeservice>* /[Location, NOT delivery address] Pro Bike Service C.I.C. Mobile Garden City Olympic Village London E20 1GW/ On 25/07/17 21:11, thethinktank-request(a)lists.bikecollectives.org wrote: > Send Thethinktank mailing list submissions to > thethinktank(a)lists.bikecollectives.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… > > or, via email, send a message with subject or body 'help' to > thethinktank-request(a)lists.bikecollectives.org > > You can reach the person managing the list at > thethinktank-owner(a)lists.bikecollectives.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Thethinktank digest..." > > > Today's Topics: > > 1. Advice on laying out new premises. (Geoffrey Smart) > 2. Re: Advice on laying out new premises. (Jack Murphy) > 3. Re: Advice on laying out new premises. (Jean-Fran?ois Caron) > > > _______________________________________________ > Thethinktank mailing list > Thethinktank(a)lists.bikecollectives.org > http://lists.bikecollectives.org/listinfo.cgi/thethinktank-bikecollectives.… / /

1 0

Re: [TheThinkTank] Hiring! The Bicycle Collective (Utah) is hiring a f/t Location Director in St. George
by christos brewster 27 Jul '17

27 Jul '17

Dxdd On 26 Jul 2017 at 23:32, <Clint Watsoern <clint(a)bicyclecollective.org>> wrote: We're super excited to announce that we've partnered with the City of St. George, Utah, to begin our 5th brick and mortar location of the Bicycle Collective and we're hiring a f/t Location Director to manage it. The Bicycle Collective was founded in 2002 and has grown since then to include permanent satellite locations in Ogden, Provo, and Westminster College Campus, as well as our flagship shop in Salt Lake City. The St. George shop will be our 5th location and will have the models of satellite shops in Ogden and Provo to follow as it develops, as well as mentorship from the Executive Director and three Location Directors. We are confident in the success of the model we follow and have no doubt that with the right person in the job, the St. George Bicycle Collective will be effectively financially independent within two years while simultaneously offering all of our core programs to the community. St George is known locally as a retirement (snowbird) community, and for good reason. Temperatures range from 110 in July to 55 in January. While hot during the summer, the extreme temperatures last less than 3 months and the mild winters more than make up for it. We're anticipating that while the other shops experience slow periods from November-April, St. George BC will continue operations without much interruption. And it is a biking hotspot with hundreds of miles of MTB trails in the region as well as far stretching and low-traffic pavement through some of the most varied terrains in the country in all directions. The UDOT region covering St. George is known for spending more on bicycle infrastructure than any other region in Utah. And it's less than a 2 hour drive to Las Vegas, for what that's worth. This position is best suited to a candidate who works well with minimal direct supervision and who seeks an interesting challenge with freedom to carry out creative solutions to unforseeable challenges. Support will be available 24/7 from myself, many mentors, and local contacts, but with 4 hours of freeway between SLC and St. George, the Location Director will be working in something of an island. I, for one, would love that. I'm sure there are others on this list that would, too. Interested candidates should check out the attached job description and BC programs description. Instructions to apply are included. The position is open until filled, though we're hoping to have someone committed to the project within a month. Cheers and happy riding! Clint Watson Executive Director Bicycle Collective www.bicyclecollective.org clint(a)bicyclecollective.org *The mission of the Bicycle Collective is to promote cycling as an effective and sustainable form of transportation and as a cornerstone of a cleaner, healthier, and safer society. The Collective provides refurbished bicycles and educational programs to the community, focusing on children and lower income households.* ____________________________________ The ThinkTank mailing List Unsubscribe from this list here: http://lists.bikecollectives.org/options.cgi/thethinktank-bikecollectives.o…

1 0

Hiring! The Bicycle Collective (Utah) is hiring a f/t Location Director in St. George!
by Clint Watson 26 Jul '17

26 Jul '17

[Sorry if you're seeing this twice, I sent it once with attachments which triggered a filter.] We're super excited to announce that we've partnered with the City of St. George, Utah, to begin our 5th brick and mortar location of the Bicycle Collective and we're hiring a f/t Location Director to manage it. The Bicycle Collective was founded in 2002 and has grown since then to include permanent satellite locations in Ogden, Provo, and Westminster College Campus, as well as our flagship shop in Salt Lake City. The St. George shop will be our 5th location and will have the models of satellite shops in Ogden and Provo to follow as it develops, as well as mentorship from the Executive Director and three Location Directors. We are confident in the success of the model we follow and have no doubt that with the right person in the job, the St. George Bicycle Collective will be effectively financially independent within two years while simultaneously offering all of our core programs to the community. St George is known locally as a retirement (snowbird) community, and for good reason. Temperatures range from 110 in July to 55 in January. While hot during the summer, the extreme temperatures last less than 3 months and the mild winters more than make up for it. We're anticipating that while the other shops experience slow periods from November-April, St. George BC will continue operations without much interruption. And it is a biking hotspot with hundreds of miles of MTB trails in the region as well as far stretching and low-traffic pavement through some of the most varied terrains in the country in all directions. The UDOT region covering St. George is known for spending more on bicycle infrastructure than any other region in Utah. And it's less than a 2 hour drive to Las Vegas, for what that's worth. This position is best suited to a candidate who works well with minimal direct supervision and who seeks an interesting challenge with freedom to carry out creative solutions to unforseeable challenges. Support will be available 24/7 from myself, many mentors, and local contacts, but with 4 hours of freeway between SLC and St. George, the Location Director will be working in something of an island. I, for one, would love that. I'm sure there are others on this list that would, too. Interested candidates should check out the job description and BC programs description at https://bicyclecollective.org/salt-lake-latest/item/607-we-re-hiring-a-loca… Instructions to apply are included. The position is open until filled, though we're hoping to have someone committed to the project within a month. Cheers and happy riding! Clint Watson Executive Director Bicycle Collective www.bicyclecollective.org clint(a)bicyclecollective.org *The mission of the Bicycle Collective is to promote cycling as an effective and sustainable form of transportation and as a cornerstone of a cleaner, healthier, and safer society. The Collective provides refurbished bicycles and educational programs to the community, focusing on children and lower income households.*

1 0

Hiring! The Bicycle Collective (Utah) is hiring a f/t Location Director in St. George
by Clint Watson 26 Jul '17

26 Jul '17

We're super excited to announce that we've partnered with the City of St. George, Utah, to begin our 5th brick and mortar location of the Bicycle Collective and we're hiring a f/t Location Director to manage it. The Bicycle Collective was founded in 2002 and has grown since then to include permanent satellite locations in Ogden, Provo, and Westminster College Campus, as well as our flagship shop in Salt Lake City. The St. George shop will be our 5th location and will have the models of satellite shops in Ogden and Provo to follow as it develops, as well as mentorship from the Executive Director and three Location Directors. We are confident in the success of the model we follow and have no doubt that with the right person in the job, the St. George Bicycle Collective will be effectively financially independent within two years while simultaneously offering all of our core programs to the community. St George is known locally as a retirement (snowbird) community, and for good reason. Temperatures range from 110 in July to 55 in January. While hot during the summer, the extreme temperatures last less than 3 months and the mild winters more than make up for it. We're anticipating that while the other shops experience slow periods from November-April, St. George BC will continue operations without much interruption. And it is a biking hotspot with hundreds of miles of MTB trails in the region as well as far stretching and low-traffic pavement through some of the most varied terrains in the country in all directions. The UDOT region covering St. George is known for spending more on bicycle infrastructure than any other region in Utah. And it's less than a 2 hour drive to Las Vegas, for what that's worth. This position is best suited to a candidate who works well with minimal direct supervision and who seeks an interesting challenge with freedom to carry out creative solutions to unforseeable challenges. Support will be available 24/7 from myself, many mentors, and local contacts, but with 4 hours of freeway between SLC and St. George, the Location Director will be working in something of an island. I, for one, would love that. I'm sure there are others on this list that would, too. Interested candidates should check out the attached job description and BC programs description. Instructions to apply are included. The position is open until filled, though we're hoping to have someone committed to the project within a month. Cheers and happy riding! Clint Watson Executive Director Bicycle Collective www.bicyclecollective.org clint(a)bicyclecollective.org *The mission of the Bicycle Collective is to promote cycling as an effective and sustainable form of transportation and as a cornerstone of a cleaner, healthier, and safer society. The Collective provides refurbished bicycles and educational programs to the community, focusing on children and lower income households.*

1 0